OMG!!! THANK YOU SO MUCH!!!! One of the few tutorials I have seen where we use analysis tools to get right to the root of the issue. Most tell people to just mash some buttons till it sounds better. THANK YOU!!!!
@tommyaguilar86034 жыл бұрын
Just recently started getting into doing voice over/acting work these tutorials have been MONUMENTAL in helping me figure out what the hell I am doing. Seriously, SERIOUSLY, seeeeriously, thank you!!!!!
@MikeRussell4 жыл бұрын
Good luck with the voice work Tommy
@veronikagubkova4 жыл бұрын
Thank you so so much, you saved me hours and hours of just manually taking the volume of every "s" down, this is amazing!
@MikeRussell4 жыл бұрын
Great!
@allanspinto5 жыл бұрын
Man, thank you so much! This annoying sound was really taking my peace away, but now I've got a straight response to this issue.
@MikeRussell5 жыл бұрын
Great to hear!
@jaybeem53355 жыл бұрын
@@MikeRussell I see what you did there 😉
@MikeRussell5 жыл бұрын
😃
@LeahDay4 жыл бұрын
You are awesome! Thank you so much for this clear, concise video. You helped me out so much getting my audiobook sounding perfect!
@MikeRussell4 жыл бұрын
Great to hear - thanks Leah!
@ecasequin4 жыл бұрын
This was the absolute best understanding on DeEssing. Thank you so much!
@for_her_4 жыл бұрын
THANK YOU. I'm trying to get better at audio (always been my weakest post production skill)- and this was so informative, short, and concise. Exactly what I needed. Thanks! Can't wait to keep applying this!
@MikeRussell4 жыл бұрын
So great to hear - thanks!
@Starworshipper4 жыл бұрын
Super solid tutorial with noticeable effects on the final audio. Thanks for this 👌
@Nicole-ui5wv3 жыл бұрын
Most detailed tutorial I've seen so far besides just taking the heal tool and painting whatever
@MikeRussell3 жыл бұрын
Thanks
@traceysmiley74 жыл бұрын
Thank you so much!!! This is one of the best tutorials I've found explaining how to do this in Audition.
@MikeRussell4 жыл бұрын
Thanks Tracey
@fredache50154 жыл бұрын
I certainly learned something valuable with this vid, not only to be applied for the deEsses, thanks a lot, sir!
@KP-qk7jh2 жыл бұрын
You are the man, Mike!
@MikeRussell2 жыл бұрын
Thanks
@jbcanhear36764 жыл бұрын
This is very informative. But here's another way. I have a cheap condenser microphone that has a lot of sibilance. And even I use a deesser, some sibilance sounds still get through because those sibilant sounds have different bandwidths. The technique I use is I open the spectral frequency window, highlight the entire high frequency range then set up a hard limiter. It clips those high frequency sounds that tend to emphasize sibilance but keeps the loudness of those other high frequency sounds that don't have sibilance. It really works and clips those sibilant sounds even if they have different bandwidths...
@triskaideka132 жыл бұрын
thanks for helping me curb those S sounds! video still relevant 2 years later!
@MikeRussell2 жыл бұрын
There’s also an updated Deesser video just released 👍
@Juchrisad3 жыл бұрын
Even I understood the process and I am a complete new user of audition (less than a week) Fantastic instructions!!
@MikeRussell2 жыл бұрын
Thank you 🙏
@GetsugaMehameha5 жыл бұрын
Hey man! I wanna thank you for making this! Sibilance has been the biggest issue in my recordings and I zero in on it every time I record! Bought a DBX 286s just to try and kill the sibilance and it still wasn't satisfactory although much better than the manual way of doing it! And I knew about and tried to use the De Esser in Audition before but didn't know a damn thing about how to operate it! Today I was turning in a project and watched your video before submitting it, and my god did understanding how this thing works make such a huge difference! I greatly appreciate you making this, I can't express that enough! Keep it up man!
@MikeRussell5 жыл бұрын
Thank you so much!
@YoreHistory4 жыл бұрын
Fantastic tutorial as always Mike. The hertz range is something you don't often hear discussed it's usually just said "press this".
@MikeRussell4 жыл бұрын
Thanks. Glad it was helpful
@tobefrank7772 жыл бұрын
Thanks for the tutorial.
@MikeRussell2 жыл бұрын
👍
@TenthElementGraphics4 жыл бұрын
Dude. this is STELLAR thank you! I love it. I use fabfilter and waves deessers. but using the spectral analyzer and frequency analysis to FIND the target frequency range is GENIUS!
@MikeRussell4 жыл бұрын
Great to hear Will!
@sonyashannon4 жыл бұрын
Thank you for this excellent tutorial. You are a great teacher! I have a terrible "S" and your technique helped me polish up my voice for online classes. Thank you! And I'd now love to learn how to add some warmth like you have in your voice. Best regards!
@MikeRussell4 жыл бұрын
Hi Sonya, glad to have helped and good to hear you've got the Deesser working for you. Check out this video on making your voice sound better kzfaq.info/get/bejne/bsmCaNmctL22YIE.html
@stevehardaway9033 жыл бұрын
This was super helpful. The default setting for Male DeEsser just wasn't cutting it
@MikeRussell3 жыл бұрын
Glad to have helped 👍
@izyaliok2 жыл бұрын
Wow, thanks a lot man, that's a very good organized and useful guide!
@MikeRussell2 жыл бұрын
Thank you 👍
@amandaskapp2 жыл бұрын
Thank you for this video - SO clear and easy to follow along and understand how to adjust depending on your recording
@MikeRussell2 жыл бұрын
🙏
@40SomethingCoverArtist3 жыл бұрын
Mike, you rock man. What a cool straight to the point video. This is really going to help me. 🎤
@MikeRussell3 жыл бұрын
👍
@fmostream3 жыл бұрын
Awsome videos as always, helping me gettting much better sound for our podcast! Thank you Mike!
@MikeRussell3 жыл бұрын
👍
@maxsanderson30664 жыл бұрын
Hi Mike, just wanted to say this is the third tutorial of yours that I've watched, and they excellent. I just subscribed!
@MikeRussell4 жыл бұрын
Thanks Max
@dougiereid50013 жыл бұрын
Great video! I was struggling with just using my ear to find the right frequency... this takes the guess work out. Awesome!
@MikeRussell3 жыл бұрын
Glad to have helped Dougie.
@рамтек4 жыл бұрын
thank you so much. I wish you'll have 1m subcribers!
@MikeRussell4 жыл бұрын
🙏
@joewieseavoicetalent11 ай бұрын
Thank you again Mike Russell
@MikeRussell11 ай бұрын
A pleasure!
@AndyTanguay4 жыл бұрын
SUPER Helpful. Crash course in DeEssing. Thank you!
@aubreycoon3 ай бұрын
Thank you for showing this process in detail. Waaaaay better than just running a plugin.
@MikeRussell3 ай бұрын
I'm glad you found the detailed tutorial helpful! Learning to manually use tools like the DeEsser in Adobe Audition can really take your audio editing skills to the next level.
@gopaladas4 жыл бұрын
Best Audition tutorial on youtube!
@MikeRussell4 жыл бұрын
Woo, thanks!!!
@marisafmulka3 жыл бұрын
You have such a womderful voice to listen to. Thanks for the vídeo!
@MikeRussell3 жыл бұрын
Thank you
@BatonyRobson3 жыл бұрын
Thank you for tutorial. Very nice and bassy voice of yours
@MikeRussell3 жыл бұрын
Thank you
@luluesmail3 жыл бұрын
Clear, concise, straight to the point, thanks a lot !
@MikeRussell3 жыл бұрын
Thanks
@prosql3 жыл бұрын
Yowsa. I've been struggling with identification of the right center and width. This is a more drawn out approach than anything I've seen, but also something where I can go into it with confidence that I really have the right spot and am not impacting anything I don't want to. In short, this was a head and shoulder's higher bar set for deessing, and I love it. Perhaps the biggest beauty of it is that, after the first use, it's going to be a "jump right to the spot and verify that it hasn't meaningfully moved or grown/narrowed in width and then fine tune. Not long after that I'll know the behavior for a given voice/mic combo very well and know exactly why I have confidence in it - deessing in moments and then only this detail again with a new voice or new mic. I presume one would also want to carefully analyze the before after if using this on a track where any pitch shifting is occuring. Once again, thanks bunches. I love your very on point coverage - my time feels well used. I'll definitely be looking for any pop-up sale or the like on your courses. Two questions on the audio production course: How much total course time is there in terms of instruction time (not time spent on assignments)? I get that time isn't a great measurement of content/value (which varies a lot by how clear and concise you are and even how fast you talk), but it gives a flavor of time to complete the course and general scale of content. Are the assignments graded or is there feedback of any kind in them? One issue I've had with a very narrow course I've taken (on EQ) is that, while there is a "solution", there really isn't a method for feedback on what *I* did. Mine may be different, but that could just mean it's done to a different taste or it could mean (like it or not) it's awful. Helping understand if anything I did was worthless or harmful and why would be invaluable to learning. My wife has done cooking classes where her assignments are graded (odd for a web based course, but they have a methodology that adds value). Again, thanks for all you do for the community.
@MikeRussell3 жыл бұрын
Thanks for asking this Rob! You'll find around 2-3 hours worth of content in the Audio Production Course specifically and, YES, all your assignments are reviewed by me. So you'll get personal feedback based on what YOU do. Hope that helps - for more detailed information do feel free to drop us a line musicradiocreative.com/contact
@ABC-tt7qe3 жыл бұрын
Thank you so much!!!! Very clear and easy to follow, even for beginners!
@MikeRussell3 жыл бұрын
Thanks
@SalawuIbrahim4 жыл бұрын
Mike, you are the man!
@MikeRussell4 жыл бұрын
Thank you
@r4ulmunoz3 жыл бұрын
Great! thanks for the help first time using this plugin nice and easy!
@MikeRussell3 жыл бұрын
Glad to have helped
@AndreMartineau3 жыл бұрын
Absolutely useful. Thanks alot !!
@MikeRussell3 жыл бұрын
Thanks André
@donizetemariano5 жыл бұрын
fantastic your way of explaining, step by step here in my auditition to attest good results, thank you Russel
@MikeRussell5 жыл бұрын
Thank you so much!
@Renewi_EcoSmart2 жыл бұрын
Thanks! great job explaining
@MikeRussell2 жыл бұрын
👍
@YeahBuoy3 жыл бұрын
Thanks Mike!
@Rosetrain3 жыл бұрын
Wow, I love your content! Keep it coming!!!
@MikeRussell3 жыл бұрын
Thank you
@juniorflain27595 жыл бұрын
Hi, Mike. Very good your videos learn a lot with them ... Obriagdo for sharing your knowledge !! Big hug from Brazil - Junior Flain!
@MikeRussell5 жыл бұрын
Thank you so so much!
@rongrames6858 Жыл бұрын
Thanksssss. It was a big help!
@MikeRussell Жыл бұрын
👌
@hubyrod5 жыл бұрын
Your videos are incredibly useful. Thank you so much !
@MikeRussell5 жыл бұрын
A good question. No specific tutorial but I'll get it in my list to create!
@CarsonBoyd4 жыл бұрын
This is exactly what I was looking for. THANKS!
@CarsonBoyd4 жыл бұрын
I'm not clear on how to take a print.
@CarsonBoyd4 жыл бұрын
I found it. Click on the 1 in a square, above the red color (to the right of the word "Hold").
@RiccardoBusetto5 жыл бұрын
Fantastic, as always!
@MikeRussell5 жыл бұрын
Thank you!!
@mattvail53013 жыл бұрын
wonderful. so helpful!
@MikeRussell3 жыл бұрын
👍
@ThierryQuerette4 жыл бұрын
Amazing!! Thats all I needed to understand that
@MikeRussell4 жыл бұрын
👌
@crosbeeee Жыл бұрын
as ever, so very useful!
@MikeRussell Жыл бұрын
👍
@CosmicShamanElinros4 жыл бұрын
Wow that was extremely clear. Thank you!! :)
@Mondo_1824 жыл бұрын
This is INCREDIBLE, thank you for this :)
@MikeRussell4 жыл бұрын
Thanks Sean
@TaheraAfrose4 жыл бұрын
Thank you Russell
@MikeRussell4 жыл бұрын
👌
@YourieMathieu4 жыл бұрын
Very helpful tutorial ! 👍
@MikeRussell4 жыл бұрын
Thank you so much!
@vladasemeniuc3 жыл бұрын
Thank you so much!
@MikeRussell3 жыл бұрын
👌
@VonClaytonGaming Жыл бұрын
holy SHIT this is probably the first time I've gotten my de-esser to really work on my voice. I think because I have some buck teeth, I get bad sibilance usually I try to use the de-esser and estimate where the sound is in Premiere pro, but thissssssssssssssssssssssssssssssssssssssssssssss is a way better way to do it and it sounds so much better. Its crazy, my Sibilance is way sharper than your examples, and it still took care of it! yay. but I think because its so high, it limits it, so theres a somewhat noticeable "limiter" in the sound but this is great
@thajoint4 жыл бұрын
thank you maaaan. it was very helpfull
@MikeRussell4 жыл бұрын
👍
@Talzion423 жыл бұрын
This definitely helped, thanks!
@MikeRussell3 жыл бұрын
👍
@JohnnyBeane5 жыл бұрын
Thanks for the info!
@MikeRussell5 жыл бұрын
You are very welcome!
@NateLeeLLC3 жыл бұрын
Thank you!
@MikeRussell3 жыл бұрын
👍
@NikolausVeryPermana3 жыл бұрын
Thank you very much
@MikeRussell3 жыл бұрын
👍
@shinysidesmusic94634 жыл бұрын
Cool. That has helped a lot.
@petshopgrathens-76644 жыл бұрын
Mike hello from Hellas. My name is George i would like to thank you thousand times for yr helping videos. Thank you so so so much you hane been helpfull ang easy learning.
@MikeRussell4 жыл бұрын
👍
@oscarespinosa5613 Жыл бұрын
Muchas gracias, perro ❤
@MikeRussell Жыл бұрын
Any time!
@igorb.47565 жыл бұрын
ty for such useful videos
@MikeRussell5 жыл бұрын
😃
@benangmerahkusut4 жыл бұрын
Hey mike! Your videos is very informative, i've got one project which recording an interview in a crowd place. Could you show/tell me how to make the sound better in the crowds? Or maybe any trick to reducing the crowd noises? Thank you so much
@ভোমরা2 жыл бұрын
Thanks For SUB-TITLE sIR.....
@DevTr3nd5 жыл бұрын
Like I said mad skills :-) :-) :-) great info Mike
@MikeRussell5 жыл бұрын
Awesome! Thanks!
@artemshtoda4 жыл бұрын
Thank you, pal!
@MikeRussell4 жыл бұрын
😄
@duhkhalependublackmetal35253 жыл бұрын
Muchas Gracias !! me salvaste de las malditas "S"
@MikeRussell3 жыл бұрын
👌
@aatifrashid54132 жыл бұрын
great video
@MikeRussell2 жыл бұрын
Thanks
@Nifty__Swifty4 жыл бұрын
Hey Love your videos but I am still confused on the Bandwidth portion. Not sure how to properly set mine. Your sibilance starts at 6k Hz and ends at 15k Hz. How did this let you know roughly 4k Hz of bandwidth was proper? Thanks
@MikeRussell4 жыл бұрын
Hi Austin, Sibilance differs for everyone. Everyone's voice is different and different microphones have different frequency responses. You can enable the Spectral Frequency View to help you identify your range. This video explains how to use it kzfaq.info/get/bejne/icWkqrKj3b-veKM.html
@fatjay94025 жыл бұрын
Great tuto. What i i am missing is ... things with bad audio stuff... sometimes i get a video with a interview where the mic is overbossting the voice .. or the interviewer puts the mic to far from the person... can you make like one of those " REAL LIFE " examples.
@MikeRussell5 жыл бұрын
Thank you! Added to list 😃
@marsimoto57974 жыл бұрын
thank you sooo much!!!!!!!!!!!!!!!!!!!!!!!!!
@MikeRussell4 жыл бұрын
My pleasure.
@noubend83684 жыл бұрын
Thank youu, thank you....
@MikeRussell4 жыл бұрын
👍
@isaiahobrien66402 жыл бұрын
Hi Mike, thank you so much for this video this really helped me a lot!! My one question is after you’ve done everything in the video, do you apply it to the entire audio file or one by one with the specific “s” spots??
@MikeRussell2 жыл бұрын
Hi Isaiah, you would apply the De-esser to the entire audio as if set correctly as per the video it would only apply to the harsh "s" sounds anyway.
@isaiahobrien66402 жыл бұрын
@@MikeRussell ok thank you so much!
@treitaylor53364 жыл бұрын
Mike what is the cost for an hour tutorial / screen sharing on this ... I have watched the video, I am not confident that I am using this feature correctly and I have a client that is annal about the "S" so I would be willing to pay for an hour session... please advise... Thank you. - Trei (tree)
@spellchanger11694 жыл бұрын
lol No haters made it there way here yet. Thanks for another video as always!
@MikeRussell4 жыл бұрын
Thanks! Survived so far 😉
@roscoejones3034 жыл бұрын
This looks great! How did you get the print? I clicked on the "1" at the top and nothing saved.
@MikeRussell4 жыл бұрын
Timing is everything 😉
@danielzajicek30512 жыл бұрын
THANK YOU! Do you have patreon or something?
@MikeRussell2 жыл бұрын
Thanks so much Daniel - glad to be of help! If you wanted to say thanks why not donating to Red Cross Ukraine efforts? donate.redcross.org.uk/appeal/ukraine-crisis-appeal - much appreciated!
@quantumliving88 Жыл бұрын
super tutorial thanks! but you have skipped showing us where/how to take a print of the frequency analysis view...can't see any button to do this...could you explain pls
@MikeRussell Жыл бұрын
A the top of frequency analysis there are a number of coloured buttons, those are what you click to capture a print
@quantumliving88 Жыл бұрын
@@MikeRussell aha…. Thanks! Do those colours mean anything or do I just pick whichever I like?
@MikeRussell Жыл бұрын
The colours are just to help you identify the print you've captured, you can chose any colour
@quantumliving88 Жыл бұрын
@@MikeRussell thanks a lot :-)
@MikeRussell Жыл бұрын
👍
@marcpena55074 жыл бұрын
What's the coloration Mike makes with the bandwidth? He see's the symbalince starts at at 6000 and ends around 15000 and decides the bandwidth should be around 4000...how why? I don't get that seems important to get the bandwidth right.
@bigjuicypickles68225 жыл бұрын
Yo mike! Iv got a question, so I stumbled along an old song, probably 40 or 50 years old, and I want to make the sound quality better, like modern audio. Any ideas?
@MikeRussell5 жыл бұрын
Great one for the community here: community.musicradiocreative.com/
@thrabitoffical3 жыл бұрын
Sir how to export audio without losing the quality... Please make a video
@MikeRussell3 жыл бұрын
There is no lessening in quality when exporting audio if you save in a lossless format such as .wav
@thrabitoffical3 жыл бұрын
@@MikeRussell but how I will import the .wav file in premiere pro
@MikeRussell3 жыл бұрын
You can easily import a .wav file into Premiere Pro and add it to your timeline.
@thrabitoffical3 жыл бұрын
@@MikeRussell thank-you sir
@defiverr46974 жыл бұрын
Could you please help in bringing Reaper plugins to Audition? It seems it can't be done. thanks. There's no video for it. All of my Reaper's plugins just don't show up after setting directory and scanning it.
@tonyfourpaws45113 жыл бұрын
what are your playback settings to be able to loop the selected portion so accurately? i use spacebar btw
@MikeRussell3 жыл бұрын
Just default settings with loop mode enabled
@VGDocs4 жыл бұрын
I know there's some variation but if I came out with ~4850 Hz which is FAR lower than the examples here, is that normal too or am I not doing it right?
@MikeRussell4 жыл бұрын
Sibilance is dependent on a number of factors, the most important being your voice and your microphone so frequencies differ for everybody. One easy way to check when you set the DeEsser is so to check the ouput sibilance only option at the bottom. If you're hearing just the sibilant "S" sounds then you've set it right, if you're hearing a lot of other sounds then you haven't found the affected frequency range yet.
@ndv123ndv4 жыл бұрын
How do you determine what to set the bandwidth to initially?
@MikeRussell4 жыл бұрын
Start around the 8000 mark.
@Andrescg20164 жыл бұрын
hey thank you so much, but I can´t see in my adobe audition the the menu where you can see the HZ, just in the right at the end
@MikeRussell4 жыл бұрын
It's the Frequency Analysis window.
@NHungVD77993 жыл бұрын
Excuse me, i dont understand from the part you typed 8000 HZ and 4000 Hz, I don't get acording to what information that you get those number? thanks
@MikeRussell3 жыл бұрын
Watch the part where I’m analysing the spectral frequency display. That’s how I’ve worked out the frequencies.
@user-rb8vc4et4s4 жыл бұрын
I am sorry, would you agree that the Russian "s" sounds will require a little higher threshold?)
@MikeRussell4 жыл бұрын
Maybe, need to try!
@KotleKettle3 жыл бұрын
I didn't understand, how did you look at the peaks between 15 and 9 Mhz, and decided that 4k is the right bandwidth?
@MikeRussell3 жыл бұрын
A lot of audio production comes from experience giving you an "ear" for what you're working with.
@KotleKettle3 жыл бұрын
@@MikeRussell thank you very much for a reply, Mike! But still, how is the "ear" worked there, when you literally used your eyes...
@MikeRussell3 жыл бұрын
I've been producing a long time, you learn to be able to develop an ear for things and also an eye. It comes with experience
@quantumliving88 Жыл бұрын
My last question in the previous thread must have fallen through the cracks :-) That issue still hasn't gone away, so I will ask again if that's ok. How can I completely clear the frozen outline from the Frequency Analysis window? Double click on the same Hold colour button only changes the colour of the outline but it does not delete it. Even when I closed and reopened Audition, and updated it to the current version - when I opened this window, that OLD graph was still there! I can use live display and take prints of them, but they are all sitting over that OLD outline which simply doesn't go away. How can I completely remove it?
@MikeRussell Жыл бұрын
Have a look at this old video which should help kzfaq.info/get/bejne/iM6Ae9Gl2rqogYk.html
@quantumliving88 Жыл бұрын
@@MikeRussell Thanks, will check it out. Another issue and a painful lesson - I applied De-esser to my file before normalisation, and now it sounds as if there was no De-Esser applied at all! Now I have to do it all over again, and still did it manually. How come higher volume pronounces the hissing? Do you have a video on the sequence of .effects when one is cancelling out or changing another?
@MikeRussell Жыл бұрын
Check out this video kzfaq.info/get/bejne/jtJgqc5hldzbZIE.html
@quantumliving88 Жыл бұрын
@@MikeRussell Love it! thanks! just what I was looking for :-) as easy as 1,2,3 :-)
@ImTash2 жыл бұрын
is it actually possible to do this in premiere pro? their De-essers don't seem to cut the mustard for particularly sharp Ses and short of actually exporting the audio out to audition, editing it, then replacing all the audio and exporting again (omg talk about a ballache) i don't see how it would be poss
@MikeRussell2 жыл бұрын
The effects available inside Premiere Pro are the same effects available in Audition. The one advantage of processing in Audition is you have more tools available to ensure you have the DeEsser set correctly.
@ImTash2 жыл бұрын
@@MikeRussell ah ok - the audition ones seem to be a bit more effective in my incredibly limited experience with it - although i think 90% of this is because i don't really have a clue what i'm doing with PP.
@Indoviral7194 жыл бұрын
please translating
@FulcanMal5 жыл бұрын
I really don't know what I'm doing wrong. It just doesn't seem to work for me.
@MikeRussell5 жыл бұрын
Great one for the community here: community.musicradiocreative.com/
@h.rdubya62073 жыл бұрын
I didn't understand the bandwidth part
@MikeRussell3 жыл бұрын
The bandwidth is exactly as you'd imagine, the width of the band around the frequency you set that the DeEsser will work on
@h.rdubya62073 жыл бұрын
Duh, me. Thank you
@MikeRussell3 жыл бұрын
Always worth asking any question 👍
@venturagabin3 жыл бұрын
Why 4'000? in Bandwith
@MikeRussell3 жыл бұрын
I'm using 4000 here as it works on the voice that I'm using but you'd need to set this up individually for the voice your using for the frequency and bandwith.