Just got my Sawgrass 500. Your videos are my "go to" to learn how to use my machines.
@hillbilln96089 ай бұрын
Thank God I found you, Angie! I just got my new Sawgrass and had no idea how to use it. Thank you 😊
@AngieHolden9 ай бұрын
Welcome!!
@pottieann Жыл бұрын
What an awesome job! This is the info I was looking for! I can fumble my way through printing with sawgrass printer but now I know exactly how to use it, thanks to you!
@AngieHolden Жыл бұрын
Happy to help!
@relaxingmusicwithalisonjay907411 ай бұрын
Angie, I am new to sublimation and your channel is my 'go to' training centre! You are so clear and easy to understand. Thank you xxx
@AngieHolden11 ай бұрын
So glad you like it!
@SwoosieQ5417 Жыл бұрын
Yes!! I received my sawgrass last week and haven’t really played around with it yet. This is by far the best video I’ve seen!!! Thank you for sharing 🫶🏻
@AngieHolden Жыл бұрын
Yay! Happy to help!
@pamgeorge3835 Жыл бұрын
Thank you so much! My Sawgrass is supposed to arrive today! On to your next video.
@AngieHolden Жыл бұрын
Hope you enjoy it!
@annrosie1803 Жыл бұрын
Fab! I've had my printer for months and didn't know most of these things. Thank you.
@jemmy2323 Жыл бұрын
This really helps me do some things I was stumped on. Thank you for keeping everything so clear and concise.
@victoriakelly69911 ай бұрын
Angie,I love you tutorial and I'm ready to get a sawgrass printer and with you video ,I think I can do it,i've been sublimating for a year now and I'm ready to upgrade printer,Thank you
@AngieHolden11 ай бұрын
You can do it!
@debfr Жыл бұрын
You came at the right time for me, yay. I’ve just purchased Sawgrass! Thank you for sharing, super helpful 🤗🥰
@AngieHolden Жыл бұрын
Hope you enjoy it!
@lizpuertorico596810 ай бұрын
Thank you so much,ink and paper is expensive now i know how to use print manger and google docs for printing thank you 😊
@AngieHolden10 ай бұрын
My pleasure 😊
@jenniferharmonywalker8902 Жыл бұрын
can't wait to setup ,my new sawgrass and finally use it thanks for sharing!!
@AngieHolden Жыл бұрын
Have fun!
@DACTION1000 Жыл бұрын
Thank you for sharing this precious, important and informative information.
@raymondmaher1388 Жыл бұрын
I knew i could rely on you to explain my new sawgrass before i try to use it...
@AngieHolden Жыл бұрын
YESSSS!!
@amazing_mich1509 ай бұрын
Thisssss 👏🏽 THAAAANK YOU!!!
@tamariwatkins4454 Жыл бұрын
Loved your video Angie!!! Well done once again!
@AngieHolden Жыл бұрын
Thanks!
@churpina Жыл бұрын
Wow! This video is so spot on! So much useful information! Thank you :)
@LisaVornhagen Жыл бұрын
That was great! Very interesting and easy to follow. It will be very helpful if I can ever buy a Sawgrass.
@nourakreates Жыл бұрын
Thank you for this tutorial 💕 💖
@JuliePettyjohn Жыл бұрын
Thanks. Helpful. I bought a Sawgrass 1000 from an individual and was worried about setting up things and if I could get print manager as a used machine. I got it installed. Still can't figure out if I can get Creative Studio. Nice to know Print Manager works so well with other programs in case I cannot.
@AngieHolden Жыл бұрын
You should be able to get Creative Studio as well without issue.
@wendyvalerie66247 ай бұрын
Thank you for such a thotough tutoriel. Please How can I have the 3d animation button to show and funtion in creative studio
@AngieHolden7 ай бұрын
Sorry not sure.
@malianichols2505 Жыл бұрын
Thank you Angie for this. My fiancé is going to get me a sublimation printer for my birthday which is at the end of the month. I know you have an Epson Echo Tank 4700 and I was wondering which one you like best - the Sawgrass or the Epson? I have seen other comparison videos on each and I thought I would ask your opinion. I am not sure how often I will be using it (daily, weekly, etc) and I understand that the Hipppo ink is cheaper than the sawgrass, Sawgrass has a self-cleaning option (not sure how often you have to clean the Epson) and etc. I value your opinion and if you have a moment to give me your opinion I would greatly appreciate it. I would like to make sure that we get the right one. Thank you again for all you do!
@AngieHolden Жыл бұрын
I am working on a big comparison video but wanted to use each printer before I release that. A converted Epson EcoTank has several issues that people run into. You need to print regularly or you will run into clogs. And there are often color issues. There is the Epson F170 that is more expensive and solves some of that but you do still need to print regularly. The Sawgrass does solve a ton of issues including the self-maintenance and included software but it is more expensive to start. I know the price of the EcoTank and ink is just too good to pass up for some people and it is not a bad option at all. You just have to go into it knowing there may be issues and headaches.
@kerimgayretli11 ай бұрын
Hey Angie! Thank you for this How To, this helped me a lot. Do you know, if it is possible, to also print sublimation films? I ordered a 3D Vacuum Heat press.
@AngieHolden11 ай бұрын
I have only ever seen those preprinted. I will look into it though!
@barbaramurchison16036 ай бұрын
I found this very helpful. So when I right click on the PM icon at the bottom of the page it only brings up printer settings and not print mate, any idea why or what I need to do to get print manager to open with the right click?
@AngieHolden6 ай бұрын
Right click then I think there is a print manager option you can pick. I haven't used print manager in a while!
@velvetjohnson529Ай бұрын
I have a problem with my sawgrass 1000 printer. It gives me and alert to change tray 1 settings to custom size IJ Plain. I don't see that anywhere
@AngieHoldenАй бұрын
Sounds like your printer settings do not match your computer settings. You should be able to change the printer settings on the printer.
@bbandsue222 Жыл бұрын
Hi, I have a sawgrass 500 printer…I can’t seem to get my tumbler wraps the right size without having to trim away parts of them. Every time I change the size in print manager it still doesn’t print the correct size. I don’t know what to do to correct it. I recently had a special png tumbler wrap made, but unfortunately I can’t trim it because of the lettering running down the sides and they have to line up. Is it possible for you to tell me what I’m doing wrong so I can resize the wrap. Thank you in advance! 😊
@AngieHolden Жыл бұрын
My guess would be in printer manager making sure your size is the same as you want it to be as I show here on the tab where you can alter it.
@halleyniles30897 ай бұрын
im having the same trouble, i try and make my design into landscape and when i get to print manager preview its rightside up again
@lisacollodi2776 Жыл бұрын
This is great. So I do have a question. When I send to printer I only have the option of sawgrass1000 the print manager doesn’t show up this is from Cricut design space. Help please. Love your tutorials
@AngieHolden Жыл бұрын
It should show up as an option in your printers. Try reinstalling the printer.
@Vikefreaks Жыл бұрын
Okay....You've convinced me that a Sawgrass SG500 (and with Siser ink/products) is the way to go! However, when I click on any of the three "affiliated links" above I'm not taken anywhere. Is it just me?
@AngieHolden Жыл бұрын
Sorry! I apparently missed this video when I was fixing old links. Fixed them now!
@alanys2311 ай бұрын
Why I can't put measurements on my print manager 😢 try to put 10.2 by 9.6 and won't let me 😢
@AngieHolden11 ай бұрын
Is that too large for your printer? If it will not fit on the paper, it will not let you add it.
@user-vl9ic2nx3o Жыл бұрын
Hi Angie!! Your videos are always super helpful!! However, I am struggling with what to use in the print manage for paper bags under material.
@AngieHolden Жыл бұрын
I have not sublimated on paper so not sure. Maybe try the vinyl option?
@patriciarychwalski55896 ай бұрын
On my Sawgrass printer the print manager it won’t change the type of paper it shows glitter
@AngieHolden6 ай бұрын
Paper type doesn't matter that much but I have never seen glitter as an option!
@halleyniles30897 ай бұрын
Angie, how do i get print manager to keep my design in landscape when i move it over to print manager for tumblers and try to print it so it will fit it flips it back to stright up and down and not sideways like i transfered it over there
@AngieHolden7 ай бұрын
I have not used print manager in a while as I switched to their new program. Try playing with the settings and making sure it is not resizing the image.
@Mamawtesa7 ай бұрын
I’m making luggage tags. When I create more than one on my page, it puts them too close together so I cannot center it on my blank. How can I create space between them please? Thank you
@AngieHolden7 ай бұрын
There is a spacing option where you can type in a number and also a checkbox to center on page. Both of those should help.
@angelinaromeropeart389 Жыл бұрын
I installed my sawgrass printer a few days ago. I also installed the ink cartridges. Well after the ink ran it’s course ok the printer; was shocked to see that I got a low ink alert Went to print manager and ink is just about empty. Tried contacting the company and sent an email about my ink problem and I’m not getting a response. I had only printed a couple pages so it’s not like I’ve printer a ton. I need help for an explanation on why the ink is suddenly low after installation. Please help. I need an explanation
@angelinaromeropeart389 Жыл бұрын
I just installed my sawgrass printer. After the ink cartridges were installed, all of a sudden I get an an alert that the ink is very low. I checked print manager for ink level and it’s very low. Not allowing me to print. I only printed 5 papers. The sawgrass ink is very expensive. I feel this is highway robbery for the newly installed ink to empty out so quick
@AngieHolden Жыл бұрын
I would contact Sawgrass directly with your concerns.
@wileydog2226 ай бұрын
Thank you for your informative videos, I have learned a lot from you! I am seriously considering a Sawgrass 500 but I am frequently away from home and am concerned about the nozzles drying out during my absence. Can the Sawgrass be programmed to do a test print once a week if power is left on? TY
@AngieHolden6 ай бұрын
A Sawgrass does its own maintenance as long as it is plugged in and on. You don't have to do anything.
@wileydog2226 ай бұрын
@@AngieHolden thank you ❤️
@Maxluv Жыл бұрын
I've had my SG 500 for almost 2 years using PM and still learned quite a few things that I didn't know about, for one how to change the default to polyester instead of metal that always comes up for me lol and never paid attention to the plus and minus.
@AngieHolden Жыл бұрын
Yay! Happy to help!
@amberholifield7656 Жыл бұрын
Thank you so much for the video!! My question is- the lock ratio on print manager. Is there anyway to unlock it? My measurements are right in creative studio, but then when I send to print, it changes the size. And won’t let me adjust it back to what it’s supposed to be
@AngieHolden Жыл бұрын
Try that first screen and the check boxes for preserving the layout. One of those may be wrong.
@rbabyjane2 Жыл бұрын
What if none of your options show under print for you to print from
@AngieHolden Жыл бұрын
Sounds like you didn't get the printer installed correctly. I would walk through those steps again.
@Alex_Abebe Жыл бұрын
Thank you! This will come very helpful when I get my printer. If it’s not too much trouble, can you please share where you get the ladder shelf that’s behind you? I have 3 Cricut machines and that would be awesome for storage. Thank you!
@AngieHolden Жыл бұрын
I just ordered from Wayfair.
@mrs.m.humphrey12949 ай бұрын
How do I print on the full page 11x8 paper
@AngieHolden9 ай бұрын
Sawgrass printers have a margin so you can't print edge to edge.
@belyndamcmullen5583 Жыл бұрын
I love watching your video's! I want to purchase a Seagrass 500, my question will this printer be able to take the etc film? I have an Epson 2860 and the printer will not take the sub paper, I have used all hacks that I can find, it keeps running the paper straight thru with no image. Am I doing something wrong? My concern is the saw grass printer taking up the dtc transfer film using the hack will I have the same problems as in the epson. Thank you for your advice. Belynda
@AngieHolden Жыл бұрын
I have not used DTF film at all so I do not know.
@Crazydoglady.9 ай бұрын
How do I connect my sawgrass 500 to my android?
@AngieHolden9 ай бұрын
I don’t use my phone to print so I am not sure.
@daniellecollins4069 Жыл бұрын
Tons of great info thank you! Question- do you know why sawgrass print manager doesn’t show as an option in my printers list drop-down menu when I go to print? Only the sg1000 itself is there but no print manager.
@AngieHolden Жыл бұрын
It definitely should. Maybe try uninstalling and reinstalling it?
@colleentrimberger3711 Жыл бұрын
I design my items in my silhouette studio when I import to this program is changes the size- I have wasted so much paper/ ink
@AngieHolden Жыл бұрын
The checkbox that says "preserve layout" should fix that.
@charmainmcdowell803711 ай бұрын
how do u get a printmate log in
@AngieHolden11 ай бұрын
When you buy a sawgrass printer you get access to their software.
@dongrutzius3916 Жыл бұрын
how do i adjust my black hues? some of my blacks turn out grey. if I'm printimg black, i want it as dark and full as it can get and i have variences with black prints. thanks in advance!
@AngieHolden Жыл бұрын
First, make sure you are telling the printer to print a TRUE black. Second, it may look grey on the print but may press black to a 100% white polyester cloth. Third, it could be your time/temperature/pressure of your press that is causing your colors to look off.
@ticmike Жыл бұрын
Im new to this and something is driving me insane!!! I create an image in photoshop in this example a mug design thats 19.5cm X 10cmso I create it and then hit print to send it to print manager, which it does, but when it gets to print manager its the wrong size, the original design size from photoshop is now a much bigger size. I want to keep designing in photoshop as I think its the best way to design and size but for the love of god and my own sanity, can anyone tell me how to fix this issue???
@AngieHolden Жыл бұрын
Click "preserve design from designer".
@ticmike Жыл бұрын
@@AngieHolden tried that, no joy
@raedeenchambers8721 Жыл бұрын
Hi Angie My struggle with my Epson F170 is getting a true black. Does Sawgrass Print Manager solve this issue? As well,I am not able to find the bundle. Thank you
@AngieHolden Жыл бұрын
Sawgrass Print Manager only works with a Sawgrass printer. Are you pressing what you print to 100% white polyester fabric to see the true color?
@raedeenchambers8721 Жыл бұрын
@@AngieHolden yes,I am considering buying a Sawgrass. I am printing to 100% poly and getting a green hint.
@AngieHolden Жыл бұрын
A green black is generally underpressed. So more time or temperature.
@JuliePettyjohn Жыл бұрын
Angie, it's me again, Julie. I got everything figured out to a point. However, I had an image that was wider, not so long. I wanted two copies to stack. I could see there was plenty of room on my tabloid page. However, when I added another copy, Print Manager put it on a separate page. Any suggestions? I tried it in Creative Studio and it wanted to upload only psd files. Mine was png. I will watch your CS video next. Just trying not to waste paper. Thanks, again.
@AngieHolden Жыл бұрын
You can put it in Creative Studio just upload in your gallery not as a design. It must think there is not room for some reason? Maybe the margins?
@keenaduncan4374 Жыл бұрын
Do you have a video making a bigger size print with the sg500?
@AngieHolden Жыл бұрын
You can try piecing together prints. I did that here: kzfaq.info/get/bejne/i9JpoLZ03MWWomg.html
@keenaduncan4374 Жыл бұрын
@@AngieHolden thank you
@sillybilly74100 Жыл бұрын
Hi Angie, I’ve just watched your video (which was really helpful) and wondered if you could help with a question. I am using canva to create designs but it only downloads pngs in 72dpi. If I change the quality in print manager to 300 will this increase the quality? Thank you in advance 😊
@AngieHolden Жыл бұрын
You would need to download at 300 dpi. I think I have that option but I pay for Canva.
@nicolebartscher3203 Жыл бұрын
Hi Angie. I have a sawgrass printer purchased about 4 weeks ago and purchased some sublimation content from you. I have an image that is in 4 or 5 different formats and sawgrass will not allow me to import it to print for sublimation help!
@AngieHolden Жыл бұрын
Can you tell me what format you are trying to print and what error it is giving you?
@nicolebartscher3203 Жыл бұрын
@@AngieHolden ok I found the error of my way!! I rewatched your video. One last question, Is there any way to print bigger than an 8 1/2 x 11 or an 8 1/2 x 14 on the Sawgrass 500? Thank you
@AngieHolden Жыл бұрын
Maximum is 8 1/2 x 14 with that printer.
@nicolebartscher3203 Жыл бұрын
@@AngieHolden thank you!
@debi6511 Жыл бұрын
Can I print from Cricut?
@AngieHolden Жыл бұрын
Yes. You would send from Cricut to this Print Manager.
@debi6511 Жыл бұрын
@@AngieHolden is there a trick to that? I tried for 2hours yesterday. Do I just use print manager?
@AngieHolden Жыл бұрын
Click print in Cricut Design Space and choose print manager from the printer drop down.
@debi6511 Жыл бұрын
@@AngieHolden Thanks so much ! got it!!! Much appreciated !!
@StoneHazeCraze Жыл бұрын
Not for Australia again 😭
@DavidBrubaker-u6g9 күн бұрын
What is sawgrass tech support phone number I am not having any luck getting to talk to anyone
@AngieHolden9 күн бұрын
You have to use the ticketing system to schedule a call.