HOW TO: V Hull Jon Boat Conversion

  Рет қаралды 69,063

Ten Buck Traveler

Ten Buck Traveler

8 жыл бұрын

Material List
_____________
Plywood: www.homedepot.com/p/Unbranded-...
Framing: www.homedepot.com/p/Unbranded-...
Hinges: www.homedepot.com/p/Everbilt-3...
Rubber Flex Latch: www.westmarine.com/buy/southco...
Sprayer: www.homedepot.com/p/Wagner-Fle...
Stain/Sealer: www.homedepot.com/p/Preserva-W...
D-ring Handle: www.homedepot.com/p/Keeper-Lig...

Пікірлер: 52
@k.r.f.j.b.8144
@k.r.f.j.b.8144 10 ай бұрын
That huge center compartment would make a GREAT livelwell with a little bit of work!
@mchugh48
@mchugh48 4 жыл бұрын
I love your frame for the bottom. Good ideas - Do you recommend using treated wood for the frame and plywood? what thinkness plywood?
@nickvenable3628
@nickvenable3628 4 жыл бұрын
Great video. I am doing research to replace the floor in mine. We are 4 years out from when you posted the video. How has the floor stood up? Is there anything you would do differently now? Thanks.
@kurtwolhuter2209
@kurtwolhuter2209 4 жыл бұрын
Did a great job. I have a similar shape boat also considering putting a flat deck in. Are those 2 by 2 floating or screwed down? Thanks.
@punishersoriano2895
@punishersoriano2895 6 жыл бұрын
great video,love the set up
@TenBuckTraveler
@TenBuckTraveler 5 жыл бұрын
thanks!
@rickylove619
@rickylove619 6 жыл бұрын
Dam man pretty bad ass work! I’m starting a project on a 12ft wards v-bottom aluminum boat. I kinda would like something similar.
@TenBuckTraveler
@TenBuckTraveler 5 жыл бұрын
Thanks, brother! LMK if you have any questions
@davidleekalbjr.3035
@davidleekalbjr.3035 5 жыл бұрын
Great work. Your boat is better than mine. Liking it. Subscribing. I hope to see more.
@TenBuckTraveler
@TenBuckTraveler 8 жыл бұрын
I believe I spent $400 for the boat and trailer. I immediately resealed every seam inside and out and fixed any rivets. I needed to rewire the trailer as well but that was easy and cheap
@jimmiecathey4724
@jimmiecathey4724 4 жыл бұрын
Looks good 👍
@mulespur4806
@mulespur4806 4 жыл бұрын
I would put ridged insulation every spot I could wow I didn't realize this was 2 years old
@dennisritter8973
@dennisritter8973 7 жыл бұрын
does anyone know the weight of this boat , thanks
@acytoh
@acytoh 8 жыл бұрын
Nice. Do you have finished boat? Also - how do you like V hull boat compare to flatbottom? Does it wobble a lot?
@TenBuckTraveler
@TenBuckTraveler 8 жыл бұрын
+Acytoh Hey, the boat pretty much is the same still. Surprisingly, the vhull does not wobble as much as people say. the deck i built really makes the boat much more stable to walk around as it distributes the weight much better. With 2 people, 4 batteries, and full fishing load outs the boat still sits high enough off the water to be safe.
@acytoh
@acytoh 8 жыл бұрын
Rum Runner S2K Good to know. Thank you.
@ojmcbaggins
@ojmcbaggins 3 жыл бұрын
@@TenBuckTraveler I was wondering about the weight. About to do this to my 12ft vhull
@andrewtoyo8713
@andrewtoyo8713 8 жыл бұрын
Did you drill through the boat to connect the frame for the floor? Or are you just relying on gravity?
@TenBuckTraveler
@TenBuckTraveler 8 жыл бұрын
Just relying on gravity. I wanted the deck to be modular. So far it has worked perfectly.
@brando1937
@brando1937 7 жыл бұрын
how are those 2x2s holding up? any sagging?
@TenBuckTraveler
@TenBuckTraveler 7 жыл бұрын
no sagging. and the boat stays outside year round
@drewdempsey8324
@drewdempsey8324 7 жыл бұрын
Nice build. How did you attach the 2x2 frame to the boat?
@TenBuckTraveler
@TenBuckTraveler 7 жыл бұрын
Thanks! I didnt attach it to the boat. Just laid it in there and clean cuts will let the wood sit nicely in the boat. The weight keeps it all in place.
@drewdempsey8324
@drewdempsey8324 7 жыл бұрын
+Rum Runner S2K cool, thanks for the reply. I am trying to build one out right now.
@TenBuckTraveler
@TenBuckTraveler 7 жыл бұрын
let me know how it works out! glad I could help
@dpatt000
@dpatt000 8 жыл бұрын
is that an old see nymph? aluminum or stainless steel hull?
@TenBuckTraveler
@TenBuckTraveler 8 жыл бұрын
Its an old 1957 Aluminum Larson
@maxglaves3452
@maxglaves3452 4 жыл бұрын
I’m still trying to find a boat like that but I haven’t found one yet you got any tips?
@1065Olivia
@1065Olivia 4 жыл бұрын
Keep a close check on Marketplace through facebook and craigslist. That is where i always look.
@maxglaves3452
@maxglaves3452 4 жыл бұрын
1065Olivia ok cool thx
@avacotter2137
@avacotter2137 7 жыл бұрын
How did you make the template for the bow
@TenBuckTraveler
@TenBuckTraveler 7 жыл бұрын
I used a ton of cardboard to mock up all the plywood templates
@henrywarren5634
@henrywarren5634 8 жыл бұрын
How much did you spend on just the boat and trailer and did you et them together
@chriscastillo6299
@chriscastillo6299 5 жыл бұрын
I purchased my 14" Vhul and trailer for 300 together no motor
@TenBuckTraveler
@TenBuckTraveler 5 жыл бұрын
@@chriscastillo6299 I spent $400.
@chriscastillo6299
@chriscastillo6299 8 жыл бұрын
I rested the board on the ribs and on the deeper ends of the hull I put aluminum tubing and it was quite a bit lighter then the 2x2.
@chriscastillo6299
@chriscastillo6299 5 жыл бұрын
I did aluminum tubing too. Worked out nice, tryn to figure out how to quiet the hollow noise
@jeremyanderson8486
@jeremyanderson8486 4 жыл бұрын
@@chriscastillo6299 Maybe buy a bunch of floating noodles and cut them up. Put them in the empty space.
@jerrychronister5959
@jerrychronister5959 4 жыл бұрын
Is that an Arkansas traveler
@travishoyle1288
@travishoyle1288 7 жыл бұрын
did u shoot video on the water
@TenBuckTraveler
@TenBuckTraveler 5 жыл бұрын
not yet! It sits pretty low lol. Its a pond boat mostly. I take it on a larger lake (10 miles long) on nice days
@JonBoatBilly
@JonBoatBilly 5 жыл бұрын
Hey man I had a question about the boat
@TenBuckTraveler
@TenBuckTraveler 5 жыл бұрын
yes, whats up
@michaelprater2773
@michaelprater2773 5 жыл бұрын
You should post this on tin oats.net. Great site
@TenBuckTraveler
@TenBuckTraveler 5 жыл бұрын
I'll check it out!
@leo8505
@leo8505 5 жыл бұрын
You should give it a new coat of paint.
@TenBuckTraveler
@TenBuckTraveler 5 жыл бұрын
Lol that was my first attempt when I first got it
@quintonalame45
@quintonalame45 6 жыл бұрын
Why is the rear seat on the left you control a tiller steer with your left hand that's how we know who is experienced vs a noob with a boat
@TenBuckTraveler
@TenBuckTraveler 6 жыл бұрын
Seat wasn't bolted down. As you can see the back end was not covered with carpet yet. Seat was just sitting there...
@qballsadventures4952
@qballsadventures4952 6 жыл бұрын
Rum Runner S2K true as usual I'm took quick to talk than look I got a v hull as well I plan on converting its a 1970 starcraft sea scamp 14ft I just bought a new 25hp merc for this year can't wait to get started soon as it warms up a little
@davidmoon529
@davidmoon529 7 жыл бұрын
even with the max 25hp motor , it will probally not plane off with one adult , much less 2 men , i guess if you idle to your fishing point your cool , if you want a bigger boat buy one , you ruined that one for normal practical useage
@TenBuckTraveler
@TenBuckTraveler 6 жыл бұрын
I built it for how I use it. Small lakes and ponds in my area. I have a larger boat for larger bodies of water.
Easiest way to build a casting deck with a hatch - Boat DIY
6:58
There's One Outdoors
Рет қаралды 27 М.
Super Simple Jon Boat Floor
12:48
Anthony Jones
Рет қаралды 590 М.
DAD LEFT HIS OLD SOCKS ON THE COUCH…😱😂
00:24
JULI_PROETO
Рет қаралды 9 МЛН
Playing hide and seek with my dog 🐶
00:25
Zach King
Рет қаралды 21 МЛН
Best father #shorts by Secret Vlog
00:18
Secret Vlog
Рет қаралды 22 МЛН
Making my boat wider!
10:48
Willamette Valley Marine
Рет қаралды 157 М.
12 foot aluminum boat 9.9 Evinrude Pt. 1
3:11
Milo420
Рет қаралды 64 М.
DIY Cheap Removable Casting Deck
6:51
The DIY Crab
Рет қаралды 968 М.
V-Hull to Bass Boat
6:41
VANDEE
Рет қаралды 27 М.
Jon boat mods part 3 | The Boetker Channel
4:21
The Boetker Channel
Рет қаралды 124 М.
Boat Deck Modification 14ft Aluminum Boat
10:18
BlueLineAngler
Рет қаралды 154 М.
Tiny Boat Tour - DIY Semi V Hull To Bass Boat Conversion
8:17
Paul Konnikov
Рет қаралды 36 М.
DIY Catfishing, Bowfishing, Duck Hunting Jon Boat Conversion
30:29
Send It Jon Boats
Рет қаралды 834 М.