How to Wash Black Car and Prevent Scratches and Swirl Marks | 2000 Viper GTS ACR | Chemical Guys
Рет қаралды 198,398
Күн бұрынKeeping black paintwork looking its best is a full time job. In this video Nick goes over this black Viper GTS ACR to remove all the surface contaminants in preparation of the next step in the detailing process.
The key to a flawless finish starts with the proper washing and drying techniques. Using Chemical Guys Black Light Soap in combination with the TORQ Big Mouth Foam Cannon this Dodge was blanketed in a thick layer of foam. Black Light Wash offers tons of suds which add to a great wash experience as well as add lubrication for a scratch-free finish while magnifying a deep gloss.
Dry any vehicle fast and touch-free using the Metro MasterBlaster Industrial Dryer & Blower System. 8 HP blower easily removes trapped and hidden water so that it won't streak paint and glass as you drive away.
Once the vehicle is thoroughly clean and dry, further paint inspection can be performed. Stay tuned for part two of our detailing mini series!
••••••••••••••••••••••••••••••••••••••••••
- Gerbil Wheel Brushes -
www.chemicalguys.com/Extended_...
- Black Light Auto Wash -
www.chemicalguys.com/Black_Lig...
- TORQ Big Mouth Foam Cannon -
www.chemicalguys.com/TORQ_Big_...
- Chenille Microfiber Wash Mitt -
www.chemicalguys.com/ProductDe...
- Dirt Trap Bucket Insert -
www.chemicalguys.com/ProductDe...
- MetroBlaster Blower -
www.chemicalguys.com/ProductDe...
••••••••••••••••••••••••••••••••••••••••••
● Website: www.ChemicalGuys.com
● Subscribe to our channel: kzfaq.info_...
● Subscribe to our newsletter: www.chemicalguys.com/category_...
● Like Us on Facebook: / chemical-guys-15994943...
● Follow us on Instagram: / chemicalguys
#chemicalguys #detailing #carcare
@supercomp7078 4 жыл бұрын
Love the air blower, we used to drive down the local highway at 100mph to do the same thing
@conceptdesigns4100 3 жыл бұрын
Except when you do that you are slinging dirty water from the wheel back onto the freshly washed car.
@Rosales33 2 жыл бұрын
@@conceptdesigns4100 mudflaps
@noeherrera8248 2 жыл бұрын
That is quite a bit of speed 😳
@DanielReyes-ys5pq 2 жыл бұрын
Lmao
@redemptionx2918 Жыл бұрын
I tired this the other day, it did not work😂😂
@danielmurillo4992 5 жыл бұрын
Thanks for a video without 15 ad breaks
@matthewosborne97 6 жыл бұрын
Wow chemguys the viper looks great it’s been a long time since I’ve seen a Dodge Viper don’t see many of them around anymore. Anyways it looks amazing and it was smart to use those dryers to dry the car. I own a black car and it shows everything lol. Anyways boys keep the great videos coming! And I’m glad nick told them guys they are filming lol buzz off and let em clean the car lol that was funny. Take care, Your number one fan Matthew
@ChemicalGuys 6 жыл бұрын
Thanks Mathew, you're right about the Viper, it's a rarity these days. We see allot of Dodge Chargers and Challengers these days, they've taken up the mantle as the new wave of muscle cars. It's great to hear from you Mathew, we hope everything is well with you and we'll catch up with you on the next video. Stay tuned buddy, same Chemical Guys place, same Chemical Guys channel! C.G. Alex -
@tacticalcanadian2722 5 жыл бұрын
Gave a thumbs up and heres some heart eyes! 😍
@charlieryan1736 5 жыл бұрын
ACR wheels are a nightmare to clean 😱 thanks for another excellent video review
@94DTW 6 жыл бұрын
The noise the dirt traps made going into the water was satisfying.
@anthonyhernandez5611 6 жыл бұрын
great vid!!!
@ChemicalGuys 6 жыл бұрын
Thank you very much Anthony, we're honored that you loved our video. Stay tuned Anthony, we have two new really awesome videos coming your way! C.G. Alex -
@javieleoya 4 ай бұрын
Love Love the Viper
@ChemicalGuys 4 ай бұрын
🤩 Thanks so much for tuning in!!
@fu571 6 жыл бұрын
🎵Nick's a big kid now!🎵
@3dmiami542 6 жыл бұрын
Awesome vid! I completely understand you guys are showing your products and so you want to take your time. Also the viper deserves the time lol but is there a possibility you can make a video showing how to detail (wash) if you were running a business? 4 brushes is just too much for someone who is mobile doing fleet washes or is on a heavy time restraint... Love the vids!
@ChemicalGuys 6 жыл бұрын
Hey buddy, how are you? Thanks for reaching out to us. A fast and efficient way to detail a car is by using a waterless wash like EcoSmart, it's easy to spray on and wipe off without any hassle. Ecosmart can be used on glass, headlights, taillights, and wheels. I completely understand what you mean with the four brushes. If you're looking for a simpler solution, the Easy Reach Wheel and Rim Detailing Brush for getting inside the dirt out from inside of the wheel. The Body & Wheel Flagged Tip Short Handle Brush is great for the face of the wheel after you get the grime out from the behind. I'll leave the links for these two products below! Stay tuned for more videos from the detail gurus at Chemical Guys! www.chemicalguys.com/Easy_Reach_Wheel_And_Rim_Detailing_Brush_p/accs37.htm www.chemicalguys.com/Body_Wheel_Flagged_Tip_Short_Handle_Brush_p/acc_g09.htm kzfaq.info/get/bejne/q5ZgYM-dxrOokZc.html
@pussytoucher 6 жыл бұрын
Hi sorry I watched the video without sound do you recommended a micro fibre like drying cloth or the air gun dryer? Thanks in advance!
@SUPERMAN-xf4fv 6 жыл бұрын
So I am guessing going back and forth in a straight line is bad?
@EmbraceMaking 6 жыл бұрын
I recently purchased your products and restored the black paint on my A4. It looks amazing and I want to keep it that way. However, right now the foam cannon, pressure washer and touchless dryer are not in the cards. What do you recommend as an alternative for those who do not have all of this extra equipment? Thanks
@ChemicalGuys 6 жыл бұрын
Hi! Those are great questions. Even if you don't have an expensive pressure washer, you can still get great foaming action with a TORQ Foam Cannon. The TORQ Foam Blaster Foam Gun combines the soapy water solution with air and running water to spray foam over your car. Simply turn the dial to adjust the dilution ratio of the soapy foam sprayed from the nozzle. The soap solution bottle holds 32 oz. of liquid. Fill with plain water, then add 1 - 3 oz. of your favorite Chemical Guys car wash soap to suit the level and type of dirt on the vehicle. The foam that blankets your car will lubricate the surface and help protect your Audi from swirls and scratches, keeping it looking its best for the longest! Pair it with a chenille microfiber mitt, and some After Wash to dry your car, and you're all set! Check them out below and thanks for watching! www.chemicalguys.com/Torq_Foam_Blaster_6_Foam_Wash_Gun_Hose_Connect_p/acc_326.htm www.chemicalguys.com/After_Wash_16_oz_p/cws_801_16.htm www.chemicalguys.com/Chenille_Microfiber_Scratch_Free_Wash_Mitt_p/mic_493.htm?1=1&CartID=0
@krum81 5 жыл бұрын
Leaf blower to dry
@bravo9890 6 жыл бұрын
Awesome video... But can you guys start shooting in 4k please. It's a great way to see the micro details.
@ChemicalGuys 6 жыл бұрын
Hey there, we'll try to do that. It depends how long the export and upload process is, 4K video is a very large format. In the mean time, stay tuned for more great videos from your friends at Chemical Guys.
@realitycheckracing9055 5 жыл бұрын
As an owner of a black car that is raced i love these videos! All of the products we have used on ours cars have shown amazing results! I do have a question pertaining to my drag raced car. What product do you recommend i used to remove the rubber from my quarter panels? I have blacklight polish an wax but was curious as to the method y'all would use to remove the rubber. Thanks and up the great work!
@ChemicalGuys 5 жыл бұрын
Hi there! Thanks so much for tuning in. Here's a video demonstrating how to remove burnt rubber. kzfaq.info/get/bejne/a7mbZ8Waq6ndXX0.html
@BrianX1333 2 жыл бұрын
Y’all making washing a car so much more extra lol I love it
@ChemicalGuys 2 жыл бұрын
Happy detailing!
@damianwhitchurchaird9518 6 жыл бұрын
Hey always love the vids.. great stuff!!! What you guys recommend for wash and wax on a atv/utv? Or possibly to a video!
@ChemicalGuys 6 жыл бұрын
Hey Damian, we can definitely give you some suggestions. For the paint, you can use EcoSmart or any quick detail spray to remove dirt from the exterior. If you prefer, you can also use our Tough Mudder soap with a two bucket system complete with grit guards. For the wheels you can use Nonsense, Orange Degreaser, or All Clean with a Body & Wheel Flagged Tip Short Handle Brush. For the leather seats, you can use the Leather Cleaner, and the Leather Conditioner. For any vinyl, rubber, or plastic pieces, we recommend using either VRP, or the Tire and Trim Gel. I'm going to leave you a series of links to the products I've mentioned for your convenience. Stay tuned for more great videos Damian! www.chemicalguys.com/Eco_Friendly_Drought_Buster_Waterless_Car_Wash_p/hol401.htm www.chemicalguys.com/Tough_Mudder_Truck_Wash_Off_Road_ATV_Soap_16_oz_p/cws20216.htm www.chemicalguys.com/Nonsense_All_Surface_Cleaner_16_oz_p/spi_993_16.htm www.chemicalguys.com/Signature_Series_Orange_Degreaser_16_oz_p/cld_201_16.htm www.chemicalguys.com/Chemical_Guys_CLD_101_16_All_Clean_p/cld_101_16.htm www.chemicalguys.com/Best_Two_Bucket_Wash_and_Dry_Kit_p/hol129.htm www.chemicalguys.com/Leather_Care_Kit_16_oz_2_Pack_p/spi_109_16.htm www.chemicalguys.com/V_R_P_Super_Shine_Dressing_16_oz_p/tvd_107_16.htm www.chemicalguys.com/Black_Ultra_Fine_W_APS_Refined_Foam_Applicator_p/acc_141.htm www.chemicalguys.com/Body_Wheel_Flagged_Tip_Short_Handle_Brush_p/acc_g09.htm C.G. Alex -
@brahda808 4 жыл бұрын
It looks like it took you guys all day to just wash the viper. I wish I had the time. Five different brushed used on each wheel. Long straight strokes to wash the car and a little blower to dry it.
@DisconnectedUser 6 жыл бұрын
Hey, we are filming here, man.
@moisesramirez5242 4 жыл бұрын
Michael Robertson you wasting our film!
@econolinegarage 6 жыл бұрын
Is that a Glock at 10:48? Pew pew!
@mc66739 5 жыл бұрын
I was wondering the same thing. Since I was pretty sure that California didn't allow citizens to carry.
@ThatItalianGuy14 6 жыл бұрын
What is the PSI range yous use on your power washers? How do you know if it's too strong and will harm the paint or not strong enough and doesn't remove any dirt? Question coming from a typical garden hose user whose interested in buying a power washer but doesn't want it to be overpowered and destroy my car.
@ChemicalGuys 6 жыл бұрын
Hi Steve, thanks for watching our videos, and reaching out to us. From our experience, the tolerable PSI for washing your car is anywhere from 800-3100. The most important thing to note is GPM which is a big factor in producing good foam when using a foam cannon. When using pressure washers with high PSI's and GPM, stand a comfortable distance away. 2700-3100 is pretty powerful.
@Bassingtv 6 жыл бұрын
Can you guys make a shop in dallas tx so I can take my vehicle
@ChemicalGuys 6 жыл бұрын
Hi, if you're ever in the Houston area, be sure to check out Detail Garage Houston! Detail Garage Houston is Texas' favorite place to pick up everything you need to make your car shine! facebook.com/DetailGarageHouston/
@reecemercado5907 6 жыл бұрын
Chemical guys do you have any specific products for removing white film from interior glass?
@ChemicalGuys 6 жыл бұрын
Hi Reece, you can try some Glass Only, Nonsense, or Total Interior. I'm trying to think of things that won't damage your interior, give those a shot. If you choose to use an all purpose cleaner, you want to dilute up to 20:1.
@Supersaiyan79 4 жыл бұрын
Also don't forget your gumboots! :)
@bigjock85 6 жыл бұрын
How come you don’t rinse the car after snowfoam but before washing? Surely the point of snow foam is to breakdown and lift away any debris left after the first rinse, thus removing as much debris before you actually touch the paint.
@calebflynn6920 4 жыл бұрын
bigjock85 they do both I think
@josephpuzzo1 3 жыл бұрын
Thats what I do..i foam and wash a few times before I start washing let the soap do its job
@majorautoclean5003 6 жыл бұрын
Good job washing but did you guys decontaminate it after??
@ChemicalGuys 6 жыл бұрын
Hey there. Maybe, maybe not ;) You'll just have to wait and see. Keep your eyes peeled for more exciting videos!
@jamese8166 6 жыл бұрын
Hi there, I just bought a black Honda S2000 and researching best methods for cleaning. I notice you didn't jet wash the snow foam off prior to two bucket method. Any particular reason for this? I thought it would be best to jet wash the snow foam off and remove any grit/dirt before applying a mitt? Thanks!
@ChemicalGuys 6 жыл бұрын
Hi James, congrats on the s2k! I saw a black one with a blue interior yesterday, it was so beautiful! Black Light uses advanced synthetic lubricants, hyper-surfactants, and gloss enhancers to emulsify dirt, separate it from the surface, and gently guide it away for a scratch-free shine. The dirt, grime, and dust are surrounded and lifted away from the surface, ensuring that your paint is never scratched during the washing process. Thanks for commenting and stay tuned for new how-to videos coming soon!
@jamese8166 6 жыл бұрын
Yeah they are lovely cars! OK cool, so if i was using a normal snow foam which doesn't contain your magical ingredients you would jet wash off first? Just this is the first video I've seen where this hasn't been done. I'll look at buying some of this Black Light then from Slims here in the UK.
@ChemicalGuys 6 жыл бұрын
Yeah, if you are using a soap without emulsifying technology, I would definitely wash it off after the first application of foam. If those particles of dirt and dust are not lifted up from the surface and coated, they could scratch your paint when dragged with the mitt. Also, remember to use the mitt in straight lines and not circular motions in order to prevents swirls in the paint!
@ChemicalGuys 6 жыл бұрын
Great choice on getting the s2k in black. I would definitely recommend picking up some Black Light Wash. However, it's just the first step in a whole line of products that we engineered just for black cars. Since your car is new, we recommend doing a full detail so you now have a baseline. Wash the car with Black Light Wash, clay, and polish it. Follow that with Black Light Glaze and then a super durable sealant like Jet Seal. Finally, top it off with our Black Wax. Your s2k will look new! Make sure to send us before and after pics! We would love to see your car. If you have trouble finding any of the listed products, let me know and I will link them to you!
@harshvirkamoh5879 6 жыл бұрын
Cool video and cool car. I have a question. In the summer sometimes when I wash our cars, and I add soap to the bucket and then water. After half way of using the soap, I get no soap on the mitt mitt and there's water in the bucket only. Is it my fault, am I putting to little soap or is it the soaps fault.
@ChemicalGuys 6 жыл бұрын
Try using a little more soap, agitate the soap vigorously. 2-3 ounces of soap usually works for a full sized bucket.
@harshvirkamoh5879 6 жыл бұрын
Chemical Guys Thanks but what do you mean by agitating. Do you mean mixing the soap. Also is it better to put the soap first or fill the bucket with water than but soap
@ChemicalGuys 6 жыл бұрын
Stir the soap so you can get some foaming action. You should fill the bucket with water first, then you would want to add the soap after so it takes longer to settle at the bottom.
@BillVegaNewDecade 6 жыл бұрын
Can you sit any closer to the steering wheel!?
@essel23fly 6 жыл бұрын
Obviously you’ve never been in a viper. If you’re anywhere near 6 feet tall, you almost have to take your shoes off to fit,
@TakeTurnsGaming 6 жыл бұрын
Thats actually a pretty ideal position.
@masterwrong3110 6 жыл бұрын
The pressure washer sounds better than the Prius.
@martaalvarez7478 3 жыл бұрын
Hi, what do you use in the water. Shampoo, special soap? Thanks
@ChemicalGuys 3 жыл бұрын
Hey Marta! Add two or three ounces of your favorite car wash soap to your bucket, foam cannon or foam gun to add cleaning power and lubrication. - CG Nick
@Seanmmvi 6 жыл бұрын
I noticed you don't use both sides of your wash mitt, is there a reason for this?
@ChemicalGuys 6 жыл бұрын
Hi Sean, it's just easier to use the side where your palm is facing downward. Also it doesn't make sense to keep rotating the mitt just to utilize the other side. With washing, the name of the game is to wash and dry your car quickly. Stay tuned for more great videos!
@kotomakosako 4 жыл бұрын
Can you use Blacklight soap on a grey car? Good idea or a waste? Thanks.
@ChemicalGuys 4 жыл бұрын
Hey! Absolutely, Black Light Auto Wash is perfect for dark color paintwork. It lays down a thick blanket of suds that reduce the chances of swirls and scratches while enhancing gloss.
@kotomakosako 4 жыл бұрын
Thanks a lot CG. About to do just that ;)
@hectorramirez2432 6 жыл бұрын
Hey guy what's up have a quick question what's a good product that you guys have or that I can use to remove the glue on the tint of the vehicles I bought a car and it looks like the guy try to take the 10th off and he just left the glue stuff on. Hector Ramirez
@ChemicalGuys 6 жыл бұрын
Hi Hector, that's a really good question. I would recommend cleaning the area first, followed by using a clay bar, then using some Butter Wet Wax. The Butter Wet Wax contains oils that will break down the glue. You might also consider a scraping knife to scrape off the residue. There's a video where we remove some stickers, it's a good example of how to remove left over glue. Stay tuned for more great videos Hector. C.G. Alex - kzfaq.info/get/bejne/m5d8bLBilb-ceJs.html kzfaq.info/get/bejne/nbyFg8h1zc67dZ8.html
@Albert859 5 жыл бұрын
Next time show the finished product after
@disorder1909 6 жыл бұрын
Nicks first manual car?
@ChemicalGuys 6 жыл бұрын
Hi Tim. Nick has worked with manual cars in the past with the Mustang video, and Nick has grown up with manual cars all his life. Nick actually prefers manual cars over automatics. Stay tuned Tim, we've got more great videos coming your way. C.G. Alex -
@xX26NEMESIS62Xx 6 жыл бұрын
What kind of pressure washer do you recommend?
@ChemicalGuys 6 жыл бұрын
Hi Brandon, we use a 2700 PSI 2.3 GPM gas operated pressure washer, I went online and checked one out for you. Some people get the electric pressure washers because they're more affordable, but from our experience the electric pressure washers don't have enough GPM. One of the other issues we notice is that some of the electric pressure washers don't have compatible nozzle tips, they have these futuristic spray wands with proprietary attachments. Stay tuned Brandon, we've got more great content coming your way. C.G. Alex - www.walmart.com/ip/Karcher-1-107-266-0-Performance-2-700-PSI-2-5-GPM-Gas-Pressure-Washer/49962504?action=product_interest&action_type=title&beacon_version=1.0.2&bucket_id=irsbucketdefault&client_guid=556003f1-bf19-448e-345c-e43d20fc9b21&config_id=2&customer_id_enc&findingMethod=p13n&guid=556003f1-bf19-448e-345c-e43d20fc9b21&item_id=49962504&parent_anchor_item_id=44187707&parent_item_id=44187707&placement_id=irs-2-m3&reporter=recommendations&source=new_site&strategy=PWVAV&visitor_id=fUzTM0PUNV0Knyi0DMpzQE
@slape54 6 жыл бұрын
Most of the vacuums can also be blowers. Do you think it would be bad to use the blower feature to dry the car? My thinking is they blow air from inside the canister and I would think would blow some dirt out onto the car? Thoughts on that logic or do you see folks or yourselves use vacuums as blowers for this car drying purpose? Thank you another good video. Precaution with black paint a must.
@cutemoutdoors3059 6 жыл бұрын
Doug slape I've done it many times with a vacuum and you will get dirt blown on it occasionally. I recommend a large plush soft towel to dry as a detailer.
@JMCDetailing 6 жыл бұрын
Also must vacuums don't have the power of the air Force master blaster
@kennysauer7224 6 жыл бұрын
Don’t do that I regret doing that
@ChemicalGuys 6 жыл бұрын
We use dedicated blowers at the garage, you don't need the most powerful blower on the market. One of the reasons that someone might want to avoid using a vacuum cleaner is sucking up some dirt particles and launching them at the paint. Also since the air pressure is high, you could damage the paint if the air hits the same location for too long, but you have to be really careless to do that. Stay tuned for more great videos Doug.
@JMCDetailing 6 жыл бұрын
Chemical Guys thanks guys
@Digz1121 5 жыл бұрын
How much PSI are you using with that pressure washer?
@ChemicalGuys 5 жыл бұрын
Hi there! Thanks for checking out the video. This pressure washer has a maximum of 2800 PSI.
@TheMilkman121 6 жыл бұрын
I use multiple mitts on my black truck. No chance of scratching
@gtrance3567 5 жыл бұрын
I tried a leaf blower to dry mine, and still ended up with spots. Any ideas on how I can avoid this?
@random5850 5 жыл бұрын
J Del Try using a microfiber towel
@gtrance3567 5 жыл бұрын
May have to, but car is black. Was trying to avoid it. Ty
@peasant4107 5 жыл бұрын
If you use like a quick wax, it will remove those spots
@gtrance3567 5 жыл бұрын
Ok ty
@cristianherrera8564 6 жыл бұрын
Hey guys great vid I had a question. I recently bought a pressure washer and snow foam cannon but my foam came out very watery and I was wondering if it was my dilution ratio I will admit I don’t know the proper dilution and how to tell using the numbers on the snow foam cannon. My pressure washer shouldn’t be the issue it makes 2800 psi using 2.3 GPM. Help Me!
@MikeEM1 6 жыл бұрын
Cristian Herrera what cannon do you have? 2800psi with 2.3 gpm should have really thick foam
@cristianherrera8564 6 жыл бұрын
MikeEM1 it’s a Torq snow foamer man I think I just messed up the ratio I got kinda confused with the numbers on the side of the bottle so I just filled it with water and added soap till I thought it was good lol I don’t really know the proper ratio.
@MikeEM1 6 жыл бұрын
Cristian Herrera 3-4oz of soap in 700ml should be good. If you still have issues, get a better foam cannon(MTM Hydro)
@cristianherrera8564 6 жыл бұрын
MikeEM1 I think it’s just my dilution ratio bro thanks tho man
@ChemicalGuys 6 жыл бұрын
Mike EM1 is right, 3-4oz of soap is the way to go. Try not to shake the bottle violently because that causes bubbles to form inside the bottle. Warm water in the bottle seems to work the best.
@TheCarDetailingChannel 3 жыл бұрын
I thought Dodge Viper right when you said heavy clutch 😂
@ChemicalGuys 3 жыл бұрын
Thanks so much for watching!! - CG Nick
@austinrivera7155 6 жыл бұрын
You guys should Detail a motorcycle
@inmomusic 6 жыл бұрын
Wouldn't it have been even better to have rinsed the foam off the car before contact washing? You have residual dirt particles trapped in that foam that you are now rubbing into the paint with the mitt. Even if some particles are completely emulsified, you can't guarantee that all are. Why not take the extra 10 min to rinse and foam again before contact washing? Just my opinion, love the viper and results!
@ChemicalGuys 6 жыл бұрын
The short answer is it involves even more water consumption.
@brandongomez1681 6 жыл бұрын
Anyone know where their detail garage is at? Wanna detail my car there
@jorgeasmr7386 6 жыл бұрын
Brandon Gomez I think they’re in los angeles
@ChemicalGuys 6 жыл бұрын
Hi Brandon, We're a company that makes detail products, and we teach classes on detailing as well. Our goal is to make detailing fun and easy by creating accessible detailing products, and we make tutorials to show everyone that washing your car without scratching is possible. Stay tuned Brandon, we've got more awesome videos coming your way. C.G. Alex -
@thisisgosby 6 жыл бұрын
Hey guys. What is the best pressure washer?
@ChemicalGuys 6 жыл бұрын
Hey there, thanks for watching this great video. We use a pressure washer like the one in the link from Costco i'm leaving you. Stay tuned for mre great videos! C.G. Alex - www.costco.com/A-I-Power-2700PSI-2.3GPM-Gas-Pressure-Washer.product.100343716.html
@thisisgosby 6 жыл бұрын
Chemical Guys Thank you so much...
@ChemicalGuys 6 жыл бұрын
You're welcome buddy!
@rickyjackson1258 3 жыл бұрын
I was sold at “wheel gerbil” 🐹
@ChemicalGuys 3 жыл бұрын
Happy detailing!!
@paulbunyun-xi9by 4 жыл бұрын
rain tomorrow
@SuperAbs99 6 жыл бұрын
Hey just wondering, what kind of pressure washer you use? and vacuum? ....
@ChemicalGuys 6 жыл бұрын
Hi Amneet, thank you for watching this great video. I'm going to leave you a link to to a pressure washer similar to the one you see in our videos. We use a metro sidekick for a blower. www.homedepot.com/p/WEN-2800-PSI-2-3-GPM-Gas-Pressure-Washer-173-cc-PW28/301403932?cm_mmc=Shopping|THD|google|&mid=srvJZ9Wc6|dc_mtid_890338a25189_pcrid_139636194844_pkw__pmt__product_301403932_slid_&gclid=Cj0KCQiAkNfSBRCSARIsAL-u3X9yCxXoF8Y_xh572XYgyk_c87RarFl_O5nrsM5OxhVNLsnyIDSzSHIaAlR-EALw_wcB www.chemicalguys.com/Metro_Vac_N_Blo_Vacuum_Blower_p/vnb-94bd.htm www.chemicalguys.com/High_Speed_Professional_Blower_p/sk1.htm
@gagankumar4989 6 жыл бұрын
Why should I choose to use the Gerbil Wheel Brushes compared to wheel woolies
@ChemicalGuys 6 жыл бұрын
Hi Gagan, the Gerbil Wheel Brushes utilize real wool compared to the Wheel Woolies that use a synthetic material. Wool has many benefits, it's ultra soft, acts as an anti microbial, and is more resilient than synthetic materials. Stay tuned Gagan, we've got more great videos coming your way. C.G. Alex -
@aarons7267 6 жыл бұрын
Will the Dirt trap fit in Home Depot and Lowe 5 gallon bucket?
@wayneknowsfah 6 жыл бұрын
Aaron 1530091 yes it will.
@rub3nDkinG 6 жыл бұрын
It won't fit the lowes bucket. It will fit the Home depot buckets, but very tight at the bottom
@Minibike817 6 жыл бұрын
Aaron 1530091 yes
@isitwasit8756 5 жыл бұрын
Dear chemical guys... could you please just come and wash my car for me..
@imbrandon16 4 жыл бұрын
That's not a viper, it's a 2000 mazda miata, you're not fooling me!
@DanhNguyenster64 5 жыл бұрын
Growing up in the 90's you probably had a mclaren f1
@EasyFold007 5 жыл бұрын
Yeah man....Can't you see I am filming....
@edwardshoemaker6208 6 жыл бұрын
Show how to detail a motorcycle! :)
@ChemicalGuys 6 жыл бұрын
Hey Eddie, how are you? We actually do have motorcycle detail videos! I'll link some examples below. Thanks for watching and stay tuned for some awesome videos coming up! kzfaq.info/get/bejne/mchyYNRkvbjRloU.html kzfaq.info/get/bejne/pKt1i8Vj0ZPemoU.html kzfaq.info/get/bejne/jLeqYLOqv53epHk.html
@edwardshoemaker6208 6 жыл бұрын
Thank you!
@TravelNut72 4 жыл бұрын
what a cutie ! lol
@ctk4949 6 жыл бұрын
Still not using a electric pressure washer to show how much it sucks compared to the gas one??
@ChemicalGuys 6 жыл бұрын
Hey there, Nick prefers the gas operated model to the electric pressure washer because the gas model has a higher GPM. Stay tuned for more great videos from the Chemical Guys team. C.G. Alex -
@alexbryan9716 6 жыл бұрын
Chemical guys can I get ur email?
@ChemicalGuys 6 жыл бұрын
Hey Alex, thanks for watching this incredible new video. Here's a link to the Chemical Guys website with our contact info. Stay tuned buddy for more great videos. C.G. Alex - www.chemicalguys.com/category_s/283.htm
@reecemercado5907 6 жыл бұрын
1st
Eater Straw Hat
Рет қаралды 26 МЛН
Jason Derulo
Рет қаралды 100 МЛН
Dallas Paint Correction & Auto Detailing
Рет қаралды 184 М.
CVR POV
Рет қаралды 822 М.
Drake's Detailing
Рет қаралды 748 М.
Cute_rahul915
Рет қаралды 79 МЛН
Доступное право. Юристы
Рет қаралды 475 М.