How To: Whirlpool/KitchenAid/Maytag Door Seal WPW10237499

No video

How To: Whirlpool/KitchenAid/Maytag Door Seal WPW10237499

Рет қаралды 21,328

Күн бұрын

How To Replace: Whirlpool/KitchenAid/Maytag Door Seal WPW10237499 www.appliancep...
Symptoms: leaking on the floor.
Tools: 1/4" nut driver, 5/16" nut driver, Torx 20 screwdriver, socket wrench with a 1/2" head, flathead screwdriver, Phillips screwdriver, locking pliers.
This Whirlpool/KitchenAid/Maytag made Washer Door Seal replaces the following older part numbers on Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears, and Kenmore Washers: W10237499.
Buy the new Washer Door Seal WPW10237499 here: www.appliancep...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepa.... We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
DIY Repair Group: / fixmystuff
Twitter: / applpartspros

Пікірлер: 26

@jmorg1267 9 ай бұрын

Thanks for the video. I learned I’m NOT going to do it myself! 😅

@appliancepartspros 9 ай бұрын

If there is anything we can help you with at all please let us know.

@Orion33759 5 ай бұрын

SAME😂

@vacondio3062 3 жыл бұрын

Really liked this video. A full replacement without any omission of key instructions for this model. Nice tips and techniques not shown by others.

@michaelmercurio7697 5 ай бұрын

This video was a life saver! Best video of this repair in my opinion.

@appliancepartspros 5 ай бұрын

Thank you. Glad we were able to help you out. If there is anything we can help you with in the future please let us know.

@RICOTIME1 5 ай бұрын

This video helped out greatly.. Thank you.

@appliancepartspros 4 ай бұрын

Glad we were able to help you out. If there is anything we can help you with in the future please let us know.

@4Schroeders 11 ай бұрын

Incredible video. Worked perfectly. Only trouble was putting on the spring on the outer ring. As instructed I put a little soap on it but I think it may have been easier without since it made it slippery and difficult to stretch. it kept popping off and a little more friction might have been a good thing. i got a second hand to hold in the one side and it went right on. Excellent instructional video!!

@appliancepartspros 11 ай бұрын

Glad you were able to get your spring back on. If you need help in the future please let us know.

@janmaniquis 5 ай бұрын

Thank you for this video. My Maytag washer was a different model but the process is pretty much the same. The close up shots really helped me understand what the instructor was doing in detail. 👍

@appliancepartspros 5 ай бұрын

Glad we were able to help you out. If there is anything we can help you with in the future please let us know.

@mauri11 2 жыл бұрын

Perfect tutorial. Did it in an hr!

@HellsDonutHouse 7 ай бұрын

15:15 Oops - you forgot to mention re-inserting the anchor screws to the panel behind the detergent tray. Otherwise super helpful video, mission accomplished in about an hour. Many thanks!

@appliancepartspros 7 ай бұрын

Thank you for pointing that out. Glad you were able to get the repair done. If there is anything we can help you with in the future please let us know.

@dnivek 6 ай бұрын

Thanks different model but, every step was the same. Took me about an hr to complete

@appliancepartspros 6 ай бұрын

Glad you were able to complete your repair. Our videos are just to help give you a general idea on how to do the repair. Our videos are not model specific.

@parkridgeracquetclub357 Жыл бұрын

Thanks for the video….it worked perfectly!

@chasmarischen4459 10 ай бұрын

THANK YOU! Great video.

@appliancepartspros 10 ай бұрын

You are welcome.

@cvfreeman1 Жыл бұрын

Thank you!

@natashamarples6468 6 ай бұрын

My issue is the last stage of the seal being attached. I can get it to stick to the puter lip at the 12 o'clock position. But soon as i work either side it slips off. Do you know a good way to stop this from happening or you have another video on how yo do this please?

@appliancepartspros 6 ай бұрын

What is the model number of your washer?