How To: Whirlpool/KitchenAid/Maytag Rear Half of Outer Tub W10772617

Рет қаралды 70,082

Күн бұрын

How To Replace: Whirlpool/KitchenAid/Maytag Rear Half of Outer Tub W10772617 www.appliancepa...
Symptoms: Broken and starts leaking water; the rear bearing becomes noisy.
Tools: Torx-10 screwdriver, Torx-20 screwdriver, Torx-25 screwdriver, large pliers, 7mm socket wrench, 13mm socket wrench, 24mm socket wrench, small flat blade screwdriver, large flat blade screwdriver, hammer.
This Whirlpool/KitchenAid/Maytag made Washer Rear Half of Outer Tub replaces the following older part numbers on Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears, and Kenmore Washers: W10253864, 280132, 285984, 8181912, 8182284, W10253855.
Buy the new Washer Rear Half of Outer Tub W10772617 here: www.appliancepa...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepa.... We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros

Пікірлер: 31

@EdM-j3d Ай бұрын

This was an awesome video, even though I went a different route and replaced tub bearings and seal instead of replacing rear tub outer. My case was a bit different, I had to replace the spider arm for the inner tub on my Whirlpool Duet washer, but this video helped with the majority of repair. Awesome job Simon, thank you very much 👍. I can only imagine this would've been a $1000+ repair

@appliancepartspros Ай бұрын

Glad you were able to fix your issue! If there is anything we can help you with in the future please let us know.

@uptoolate2793 Жыл бұрын

Done! In record time and with no injuries to either me or the washing machine! Thank you!

@zwartdirk 3 жыл бұрын

Very well done. My son and I were able to get machine apart and replace rear bearings with your help. Thank you.

@zwartdirk 2 жыл бұрын

@Joe B tub wasn't available when we looked last year. I see Sears Direct has the rear half with seal/bearing pre-installed now. But, yes, we found the bearing/seal kit online and just installed that. Worked great for about a year. Cost 16 bucks and 3 hours of work. If you're an dyi auto mechanic, it's pretty easy to do. Since you'll know the tricks of hot and cold to get a bearing in a tight spot....

@boyaksrafales7758 Жыл бұрын

Many thanks for the complete video we learn more

@thomasbolton8373 Жыл бұрын

great job. professional for sure. I will give it a go , thanks very much.

@jjcs1381 2 жыл бұрын

You did an excellent job. Many thanks to you

@van8000 5 жыл бұрын

Very good video. Great help. Thank you very much

@tonysantana1493 4 жыл бұрын

You made a very good tutorial video excellent job!!

@efraindeloa6897 3 жыл бұрын

Thanks a lot!! It really helped me!

@nimbusnoel427 7 жыл бұрын

Great video. Thanks for the help.

@user-jw6sh6hk6z Жыл бұрын

Is the outer barrel not glued?

@haulcat 6 ай бұрын

Isn’t the 2 tub part heat sealed? Melted together? I did this job and the two halves would not separate at all

@appliancepartspros 6 ай бұрын

Depending on your model sometimes you can only get it as a whole assembly, but some models do have it to where the tub does split into two halves.

@DUE130 3 жыл бұрын

HOY ARREGLÉ UNA KENMORE ÉLITE...CAMBIE SELLO RETEN Y RODAMIENTOS...Y CENTRIFUGA Y SALE HUMO QUE PODRA SER...

@kevlip 2 жыл бұрын

Great video but part must’ve not been a fit as after all this work when I ran a cycle the metal tub tore up the exterior front tub assembly again fml

@blessedone1304 3 жыл бұрын

What kind of grease did you use on the bearing?

@DMJ160 Жыл бұрын

no grease, just a little silicone spray on the outside of bearings to help set them. no grease on the seal either.

@harryberry474 2 күн бұрын

And now 8 years later ...that back half of the outter tub is (ONLY!) $551.34...or do a little research to find the correct bearings and seal and just replace bearings and seal for a fraction of the cost. Doing it that way makes it cost efficient .

@appliancepartspros Күн бұрын

Thank you for the suggestion. If there is anything we can help you with please let us know.

@harryberry474 Күн бұрын

@@appliancepartspros ...do you sell just the bearings and seal?

@appliancepartspros 12 сағат бұрын

What is your model number?

@pickingtreasures4388 7 жыл бұрын

" it should be an easy repair and only take a few minutes". No actually it is a difficult repair and takes 1-3 hours.

@van8000 5 жыл бұрын

Yes, at least 2 hours for a regular guy

@grimmy0986 4 жыл бұрын

HA..... a few mins... the entire video is 26 mins..... i would love for this guy to charge me by the hour.... takes 3 hours.. get charged for a "few mins"

@GlynWilliams1950 8 ай бұрын

Good job. Why not just replace bearings and seal. Some or your pronunciation is difficult to understand. Eg motor, the first syllable is longer and louder. MO-ta.

@appliancepartspros 8 ай бұрын

Our videos are just to help give you a general idea on how to do the repair. We do offer other videos that may show you how to replace the bearings and seal.