✅How to Wire a Visionis Access Control with VSAXESS IP Desktop Software Ver 2.0 (2020 VERSION)

Рет қаралды 24,043

Күн бұрын

Wiring Video for Visionis Access control with Vsaxess IP Desktop software. For additional information, visit us: www.fpc-security.com
In this videos you will learn how to wire a card reader, a maglock and an exit button to an access control panel.
🛒 Buy the access control kits that will work with this access controller here: www.fpc-security.com/software...
🖥 Download the VSAXESS Desktop Sofware for this panel here: www.visionistech.com/en/vsaxe...
►►►TABLE OF CONTENTS◄◄◄
► 0:00 Intro
► 0:51 WHERE TO DOWNLOAD USER MANUAL
► 2:15 HOW TO RESET THE CONTROLLER
► 3:39 HOW TO WIRE THE READERS TO THE CONTROLLER BOX
► 7:49 HOW TO WIRE THE EXIT BUTTON TO THE CONTROLLER BOX
► 12:05 HOW TO WIRE THE MAGLOCKS TO THE CONTROLLER BOX
► 16:37 HOW TO CONNECT YOUR CONTROLLER BOX TO YOUR ROUTER
For technical support you can call us in the United States at 1-888-504-3318
E-mail us: support@fpc-security.com
If you seek the best quality products for all electronic access control systems, FPC-Security.com is here for you. We have access control solutions (standalone and software based), surveillance systems, video intercom systems, automatic door openers, exit signs/emergency lights, and more.

Пікірлер: 17

@FPCSecurity 3 жыл бұрын

🟠 Now that you have your devices wired to your Access Control Panel, we recommend you to watch "How to program and configure Visionis VSAxess Version 3.2.0.52" so you can connect your panel to a management software. Here is the video 👉kzfaq.info/get/bejne/rruYqd2mx6nHiok.html

@willmarcus1051 3 жыл бұрын

Same question on the yellow wire. The previous version of the video showed changing a setting from Cathode to Anode but the current software doesn't seem to have that setting.

@FPCSecurity 3 жыл бұрын

Hello Will, Please Open VSAXESS software and go to: Access Control > Advanced Function > Device parameters > click on your panel > click on the door > Entrance card reader 1 > Advanced > change all three polarities from anode to cathode and then copy to all the readers. This videos is only about the wiring process but we are working in the video with the programming in the VSAXESS sofware using the new updated version of it. We'll let you know when that video is published. Thank you for your comment.

@damiondick7584 3 жыл бұрын

Thanks for the updated video. If, for some reason, you forget to remove the yellow wire prior to powering on system and the "forever tone" activates, How do you remove or silence it?

@FPCSecurity 3 жыл бұрын

Hi Damion, You will disable the long beep by opening the VSAXESS software and going to Access Control > Advanced Function > Device parameters > click on your panel > click on the door > Entrance card reader 1 > Advanced > change all three polarities from anode to cathode and then copy to all the readers. This videos is only about the wiring process but we are working in the video with the programming in the VSAXESS sofware using the new updated version of it. We'll let you know when that video is published. Thank you for your comment.

@damiondick7584 3 жыл бұрын

@@FPCSecurity thanks for your detailed response. I appreciate that. Will be purchasing one of these units for my lab soon

@JagadishM 2 жыл бұрын

I would appreciate if you do video for model VS-AXESS-4DLX with VIS-3002 Wiegand Card Reader, have lot of difference with this model & the one which i had 4DLX model..

@FPCSecurity 2 жыл бұрын

Hi Jagadish, thank you for the suggestion. We will keep this in mind to create this type of video in the near future.

@northblue8216 Жыл бұрын

Purchased the VS-AXESS-4DLX 4 door with bus system. Can we have a video on wiring for that one please? thanks.

@FPCSecurity Жыл бұрын

Hi North Blue. We will be putting up a video on that soon. For now you may call our tech support department to assist you with the wiring. 1-888-504-3318

@DiscoReggae 2 жыл бұрын

I noticed there was no actual demo but do I assume the OK terminal on the controller is for the reader's LED and the Beep is for the beeper. Are these assumptions correct and you need to run an actual demo with a card and lock connected.

@FPCSecurity 2 жыл бұрын

Hi Gerald. Yes, your assumptions are correct.

@ahmedwilliams3336 2 жыл бұрын

the mag lock didn't come on

@FPCSecurity 2 жыл бұрын

Ahmed to help you please contact us at 1-888-504-3318 or support@fpc-security.com . thank you

@foolishsqueefly Жыл бұрын

Would it have killed you to get the real Jimmy Smits? This knockoff is engaging but distracting.

@Mark_The_Mayven 2 жыл бұрын

You should probably learn how to put your own panel together before going to KZfaq. Those terminal blocks disconnect so that you can do wiring much easier, as opposed to the dyslexic version we are forced to watch. Good luck🤮

@FPCSecurity 2 жыл бұрын

Dear marxg4, thank you for your comment. On our next video we will make sure to follow your advise about the terminal blocks.