How To Wire LED Turn Signal + DRL Strip *Install On Car Headlights* (LEADTOPS)

How To Wire LED Turn Signal + DRL Strip Install On Car Headlights (LEADTOPS)

Рет қаралды 79,792

Жыл бұрын

Thanks so much for watching! I hope you found what you were looking for, and if you have any additional questions, leave a comment down below and I will do my best to answer you! To support my channel, Subscribe and Turn On Post Notifications so you never miss a new video!
LEADTOPS LED DRL Light Strip: a.co/d/hPGgAZs
To see more of my personal life, check out my Vlog channel @: / @nathanwinteradventures

Пікірлер: 106

@11BiShoP Жыл бұрын

My brother, you broke this shit down exactly how I needed to see it. You saved me hundreds of$$$$ The frustration I had trying to figure this out is now gone. Thank you

@WintersReviews Жыл бұрын

Thanks! I'm glad it helped man

@joemc9688 4 ай бұрын

Speaking layman's language is key a lot of times. This tutorial isn't college but it is better explained. Thanks man 😎

@simbanugz2906 Жыл бұрын

It's crazy I can pull a motor apart and rebuild with easy on my mustang. But zero knowledge on lighting. I like the advice with silicone. I'm going to be opening my headlamp assembly on my 12 mustang and add a strip towards the bottom. Thanks for video

@WintersReviews Жыл бұрын

Haha thanks, I'm glad it was helpful!

@chris03661 6 ай бұрын

Can I see the result? I have the ‘24 GT and want to add light

@dennyftw007 3 ай бұрын

Engines are complex but not electrical component complex.

@tdanna9 Жыл бұрын

You explained alot of the questions I was having along the way with other videos. Great stuff in explaining what's going on.

@seanelgie 6 ай бұрын

Best explanation I’ve seen yet thanks so much brother!

@smallsxoxo Жыл бұрын

I was convinced that having them at the bottom of the headlight was cooler but you've convinced me to have them up there since we have the same headlight shape 😮

@nicholascartia Жыл бұрын

Most newer cars have them on top so yeah

@finesse4133 8 ай бұрын

Litteraly one the best ones yet on these LED sequential set ups ...good vid bro

@Gabasto Жыл бұрын

best video i seen on this, u can clearly see what ur doing unlike the other videos

@krystian0128 Жыл бұрын

Hey, thanks for helping people sort out this stuff even after six months

@WintersReviews Жыл бұрын

Happy to help!

@josh-17 4 ай бұрын

Thanks for this video. This is by far the best tutorial on how to install these drl on KZfaq . Much appreciated 👌🏼

@WintersReviews 3 ай бұрын

Thank you! I'm so glad it helped!

@ssnaziriful 6 ай бұрын

Ace video👌🏽highly appreciated will be doing this tomorrow, top man!

@braveheart8552 11 ай бұрын

Well done. Thanks for your time!

@kongkansaikia4599 8 ай бұрын

Thanks for the detailed video!

@Kira-xv4te 7 ай бұрын

Thanks man for this tutorial. I just bought mines today and I was struggling to find which wires to connect and now I know how.

@WintersReviews 7 ай бұрын

Glad it helped man!

@pnrking Ай бұрын

Thanks alot your explanation were so complete and joyful to learn Wish youbeternal success and God Bless Thanks for sharing with us❤❤

@WintersReviews Ай бұрын

Thank you so much! I'm glad it was helpful!

@godofopinion265 Жыл бұрын

thank you, good video, greetings from Czech Republic

@WintersReviews Жыл бұрын

Thank you!

@videos9458 Ай бұрын

Thanks so much basic video❤️❤️

@SuperRob41 8 ай бұрын

nnice vid man , good work

@juniormartienz8801 Жыл бұрын

Great video

@Smirk_Station Жыл бұрын

Nice.... thanks for sharing

@Sher_hayat_x Жыл бұрын

dude awesome job man. Love from England 🎉

@WintersReviews Жыл бұрын

Thank you!

@ocotlanjalvlogs8981 Жыл бұрын

Si funcionan bien porque de otras marcas se funden rápido y no funciona bien el ámbar ?

@lily-dd9gc Жыл бұрын

great video , very helpful

@wenstafarni Жыл бұрын

I have a solder technique on my channel

@shizz7le489 10 ай бұрын

How did you find the earth hole in the socket?

@asgharkhan5401 3 ай бұрын

Good job bro

@frediimad9845 4 ай бұрын

🎉ITS very good

@user-sn2th9gm4c 9 ай бұрын

How would I connect led strip light to a jaguar 2011

@andrewsiwale1053 Жыл бұрын

Why are you so calm

@WintersReviews Жыл бұрын

Haha, God just made me like that.

@lezzeppelin2222 Жыл бұрын

He is well suited to be a teacher. 🤣

@djlakota8907 6 ай бұрын

Excellent video, well explained too....👌🏽

@firehanshg 10 ай бұрын

so you put the small balck wire in the Negative black wire at the back , The yellow wire goes two where you sais you found the 12 volt is that the top second or third slots from the top, my question is where did you put the RED WIRE, YOU MOVED TO FAST, could not get a properly look at that. any help would be appreciated. cheers Hans in the UK.

@enhanceduk4642 4 ай бұрын

RED + 12V TO POWER. YELLOW indicator live. black ground

@ghostingwo 3 ай бұрын

Wish I could install in rear brake lights cause I want a car that has really low turn signal lights and they’re separated from the brake lights 😕 so I don’t think it’s possible aghh

@firehanshg 10 ай бұрын

its a shame to did not do a slow full close d up how you tapped al 3 3wires on the back of the headllightes sockets. cheers Hans.

@anasrehan_ 8 ай бұрын

Hey bro, are they visible during the daytime? I was thinming of getting rid of the blinkers and relying on the sequentials alone. What do you think?

@WintersReviews Ай бұрын

Hey I'm sorry for the late response. I think they are visible enough in the daytime. The way I installed mine, they are more visible than the turn signals in the actual headlights.

@traceynielsen268 7 ай бұрын

How do I know what voltage clamps to use for these...sorry I'm a bit confused as there seems to be lots of different clamp voltages?

@WintersReviews 6 ай бұрын

I didn't consider that in my install but your car battery voltage will typically run at 13.5 to 14.5 volts.

@danteeback8847 6 ай бұрын

Any specific LED kit that you recommend to purchase for this?

@WintersReviews 5 ай бұрын

Link in the description!

@jamesjabbarr1368 Жыл бұрын

Can you insert the LED wires into the female port of the head lamp and just push in the electrical lead from car? I'm seriously asking.

@WintersReviews Жыл бұрын

I think it's possible but might be less reliable.

@devranyildiz58 Жыл бұрын

what do I do if I don't want the white light to be on all the time, but only have it for the turn signal? I need only turn signal

@WintersReviews Жыл бұрын

You can only wire the turn signal. Just skip the step to wire the white led lights. I would cut the wire short and put electrical tape on the end.

@richardgomez8010 Жыл бұрын

Are the strips bright enought to see in daylight?

@WintersReviews Жыл бұрын

Yes, not super well, but yes.

@stevesmith1764 2 ай бұрын

I have some of these but in bright light you can hardly see them

@user-gh5zi3gv4t 7 ай бұрын

Where did you buy your after market head lights

@WintersReviews 6 ай бұрын

Honestly its been a while but I'm pretty sure I found them on Amazon.

@peternijhoff1861 7 ай бұрын

will this work if my car doesn't have DRL's? I have a 2011 mazda 3

@WintersReviews 7 ай бұрын

Yes, you will just choose what you want to wire them to. You can tap them into the main headlights so they are on when the headlights are on. Or if you have fog lights, you can wire them into those. Or you can just use the turn signals

@anthonygentili6198 Жыл бұрын

I want to know how I switch the blue to the Amber and just run the Amber

@WintersReviews Жыл бұрын

Just wire the amber into your running lights instead of the turn signal wire.

@enhanceduk4642 4 ай бұрын

Problem is for cars like audi, vw with canbus are these finally error free ?

@WintersReviews 3 ай бұрын

I'm sorry, I'm not sure on that

@liamswan1351 6 ай бұрын

Is there a way to attach them inside the headlight itself?

@WintersReviews 6 ай бұрын

I'm sure you could but it would be pretty involved. You'd have to take apart the headlight housing and make sure to seal it back up.

@lezzeppelin2222 Жыл бұрын

Take the car to wash, will it be damaged? And is it resistant to water?

@WintersReviews Жыл бұрын

Yes, I have washed my car many times and they still work good. The key is to seal the components with silicone!

@Z-Universe Жыл бұрын

How have they held up

@WintersReviews Жыл бұрын

Really good so far! One of them was flickering because the wire was lose so I fixed it and haven't had any issues. Even in -15 degree weather they work

@cnd_ion Ай бұрын

Easy to connect that wire to the mother of the Wire connect, With goes to the light father of the ligh bulb

@eden20111 4 ай бұрын

10:20 I noticed your strip comes with a control box… mine didn’t come with the control box and the guy said it didn’t need one… what does the control box do?

@WintersReviews 3 ай бұрын

I think the box regulates the power flow so your turn signal doesn't end up blinking really fast or something like that.

@WintersReviews 3 ай бұрын

Definitely test yours before finishing the install to make sure they work right

@Dank_Nuggets_ Жыл бұрын

Can you use all blue T tap clips ? Or do you actually need different size ones cause I couldn’t find yellow at the store?

@WintersReviews Жыл бұрын

I don't think you really need different size ones as long as they aren't too big. If they are too big they won't make a solid connection.

@Dank_Nuggets_ Жыл бұрын

@@WintersReviews ok I have 6 blues ones ima try ..

@Dank_Nuggets_ Жыл бұрын

I cannot find DRL socket I got black to the negative and tested all of the holes I can’t get it to light up lol

@Dank_Nuggets_ Жыл бұрын

I found low beams and the turn signal wires but nun of them light up when I have car on DRLs

@WintersReviews Жыл бұрын

@@Dank_Nuggets_ your car might not be wired for DRL lights. You might just have to wire it into your parking lights or fog lights and turn them on manually with your light switch in your car.

@Chubs.300c 10 ай бұрын

Do these cause your battery to be dead after a while?

@philkingmke 5 ай бұрын

They don't drain the battery bc they only go on when the car is on (and the battery is being charged). That's why it's so key to connect them to the correct wires.

@andreaspook1458 4 ай бұрын

Camara focus. Dude!

@sevenrepeat Жыл бұрын

Why are you so shiny? Great video. Thank you!

@WintersReviews Жыл бұрын

Lol because I had a ton of bug spray on 🤣

@unnainconnu9098 Жыл бұрын

Next project idea: upgrade your horn to a two tones.

@wenstafarni Жыл бұрын

That's a potential idea for my channel. Subscribe to keep in the loop

@navacitoess Жыл бұрын

Where does the negative go

@euphoric_suspenseuniverse3933 4 ай бұрын

On the black wire

@wenstafarni Жыл бұрын

Great video on this same subject on my channel if your interested in a different perspective

@WintersReviews Жыл бұрын

Thanks!

@anthonygentili6198 Жыл бұрын

I mean I wish I knew how scuse me😂

@zubyyynaijaaa2677 9 ай бұрын

I’m scared I’m gonna cut the stock wires and ruin it

@jamesabarela Жыл бұрын

Hehe "Butt splice".... jk... it looks so easy watching someone else install these on youtube, but impossible when i am attempting to do it i swear it

@bengenesalaba3046 Жыл бұрын

Mine got so hot thats why i uninstalled it immediately,, does this happened to yours??

@WintersReviews Жыл бұрын

No, that has not happened to mine at all. I've had no issues. I also live in Colorado so the weather isn't very hot.

@Jn9525 6 ай бұрын

Important: make sure that the silicone does NOT contain 'acetic acid', as it will corrode the electronics...

@WintersReviews 5 ай бұрын

Thats good advice, thank you!

@MrBojo-jv4qq 5 ай бұрын

That doesn't look safe at all. There must be another way, where you don't cut the original wires from the vehicle.

@noeaguinaga4018 Жыл бұрын

Talk a little quicker bud... your life a zombie... explain further on subject...research! Cars blink fast like that to indicate that there is a blown out disconnected turn signal bulb...😂😂

@WintersReviews Жыл бұрын

Oh cool, thanks for the knowledge :)

@12skits63 Жыл бұрын

“Your life a zombie” how about you learn english bud?