How We Made A TINY Injection Molding Machine

Рет қаралды 357,098

2 жыл бұрын

BUY AN INJEKTO 2.0 KIT: actionbox.ca/products/injekto-2
DIY desktop injection molding is finally a reality! We built an extremely small and easy-to-use desktop size plastic injection machine, and we’re calling it (drum roll please)… INJEKTO! We tested it using molds created on our DIY CNC machine and it worked perfectly.
Although this initial prototype gives us proof of concept, there are still some flaws that must be addressed to create a perfect injection molding machine. We are working on developing an enhanced 2nd version of this DIY desktop injection molding machine and can’t wait to share it with all of you!
Make sure to follow our CNC and other homemade machine adventures by hitting the SUBSCRIBE button right away - it helps our channel grow!
To learn more about us, visit our website: www.actionbox.ca
Instagram: / action.box
Ways To Support Our Channel:
Merchandise: actionbox.ca/collections/merc...
Become A Member: / @actionbox
Check out some of our latest machine builds:
We built a Wire EDM
• How We Made A Wire EDM...
We built a CNC Machine
• Homemade CNC Machine! ...
We built an EDM Sinker
• Homemade EDM Sinker
We built a Plastic Injection Machine
• Homemade Plastic Injec...
We built an Anodizing Setup
• Homemade Anodizing Setup
We built a CNC Router
• HOMEMADE CNC ROUTER.
#CNC #machineshop #homeshop #DIY #mill #engineering #machine #injectionmolding #plasticinjection #plasticinjectionmachine #molding

Пікірлер: 734

@ActionBOX 2 жыл бұрын

If you'd like to help make future projects like this possible please consider supporting them / us by becoming a channel member: kzfaq.info/love/HrFvnP1EEEZHNam_Nk_5rQjoin/join A big thanks to those who already support the projects!

@merlinjim 2 жыл бұрын

I knew a guy years ago who had a virtual monopoly on the industry of manufacturing small plastic shims for cabinet hinges. They did all the injection molding in his father's home shop. The trick was that the mold itself was preheated to somewhere between room temp and the transition temperature of the plastic. This meant the plastic cooled less as it was being injected and they could make more parts at a time.

@FraMurgia 2 жыл бұрын

Can i just ask how the plastic cooling less can enable you to make more parts at a time?

@TerrisLeonis 2 жыл бұрын

@@FraMurgia I imagine each mold would contain multiple parts. But that means a longer and more complex path for the plastic, so to get the plastic to flow all the way through the mold before hardening, it would need to be preheated.

@FraMurgia 2 жыл бұрын

@@TerrisLeonis Thank you!

@mick0matic 2 жыл бұрын

Modern machines actually have cooling lines in the molds. It helps to solidify faster, you can hardly eject a hot part. Ejection pins will ruin the model if its still too hot.

@merlinjim 2 жыл бұрын

@@mick0matic yes, I had forgotten that part. Basically, the machine temperature cycled quickly

@albertbarnett6106 2 жыл бұрын

I ran injection molds for nearly 30 years of my work career. Our Molds ran from 4 ton to 120 ton presses. I thought for awhile about buying a 12 ton press on the used market and starting a small family mold shop for custom work or maybe making sporks or small items.

@joseparra6443 5 ай бұрын

Hi Albert did you stand up the family shop? I have a rubberized part I am trying to figure out how to make. Let me know if your interested in mfg.

@blahorgaslisk7763 2 жыл бұрын

A friend to the family was a tool maker, and that included making molds for injection molding. My father helped him a summer when he got to much work. He kept making the molds while my father got the grunt work of polishing the molds which was necessary to make them release easily. He got a completely new appreciation for the amount of work it took to make a good injection mold.

@sjones1234 2 жыл бұрын

Yes tooling for injection molding can sometimes even cost more than the machine itself. The molds we use in the place I work now typically cost about 35 to 60 thousand USD. The first plant I worked at had the most expensive tooling I've set at 450 thousand for a mold that made two 5 gal buckets every 40 seconds. You can find those buckets on the shelves at Walmart.

@georgeowen2083 2 жыл бұрын

@@sjones1234 I would think buckets would be a cheap and easy mold.

@lindsayhowse4883 2 жыл бұрын

Nice Video. As an experienced injection molding machine engineer, the normal position for the thermocouple is between the heater bands. The position of the heater bands is also important. The heaters should be close to the nozzle. Because the heat will be highest at nozzle end of the barrel and radiate to the material feeding point. Which gives the normal temperature profile found on conventional plastic injection molding machines. Hope this helps guys.

@ActionBOX 2 жыл бұрын

Thanks Lindsay 😊. This really helps. It’s good to hear feedback from a professional.

@cpopte 2 жыл бұрын

Subscribed. Injection molding technology is one of the most expensive and prohibitive for an average joe. Even if the part cost is really cheap - no commercial company will honor an order smaller than a few thousand pieces, and the cost of the actual mold is immense. Thanks. This would close a GAP in he dyi community - since most of us have small batches of products and either we are forced to use "off the shelf" cases and design our pcb's around those, either use not so "professional" looking 3d printed cases (wich / gram are MORE expensive than molded ones). Really thanks. The ideea floats around on the web for years now - but i've seen few or none actuqlly viable working projects.

@ActionBOX 2 жыл бұрын

Thank you 😃. We are committed to making this a reality. Looking forward to your comment in the injekto 2.0 video 😊. Cheers, Dave

@dieSpinnt Жыл бұрын

It doesn't get very expensive in the long run. The very manner, construction and function of this limb amputation machine saves the user from all too many expenses in the future (and from a too long life too...). I suggest getting ideas from their other machine ( Homemade Plastic Injection Machine | DIY, kzfaq.info/get/bejne/opqXerqmy9WtiX0.html), add proper safety enclosures, an appropriate user interface for this kind of machinery and required devices like safety relays and emergency shut down. Just to keep the prosecutor away ... ;)

@dieSpinnt Жыл бұрын

Just some cents to ""off the shelf". You mean those enclosures who come in a million different sizes, shapes and configurations, rev3rse[2]? Those which are produced by experts? I mean, you can ignore that material testing equipment and quality testing exists (like all of you guys do ... like that is an option!!!), which the machinery costs usually are 10 times[1] that of the production machines, not speaking of the expertise needed ... and have that reflected in your products: Unreliable or even with a risk of injury and with inconsistent properties. That kind of attributes does not necessarily increase trust in small manufacturers and DIY products. Occupational safety standards and quality standards, material and product testing should not be seen as enemies. On the contrary, they are important achievements of modernity, without which we would be worse off! [1] This is the place where people look in disbelief. But that is due to the lack of a clue with industry practices and requirements and that one prefers ignorance to responsibility. This is a widespread disease in maker circles and another reason for the proverbial amateurish poor quality. [2] And which also can be ordered as self-designed and produced as prototypes or in small series ... and we think we can do this at home with the same quality and reject? No!:)

@pictsidhe6471 6 ай бұрын

Rubbish. We are a job shop. We've done runs of 200 parts. Setup costs will really hurt for runs like that, though.

@pjrockastanski5075 2 жыл бұрын

This channel is severely underrated. Great design work to improve the accessibility of industrial manufacturing processes that have traditionally been out of reach for so many, or even just not feasible for small scale prototyping or production. Subscribed and sharing with anyone who may have even a passing interest. Keep up the great work.

@ActionBOX 2 жыл бұрын

Thank you so much for sharing the video! It really helps bring awareness to the channel. Comments like yours make it all worth our efforts 😁 Do you have any plans to build a machine? Cheers, Dave

@Hvandersleyen 2 жыл бұрын

pog champ; just saw the video you just shared. I never thought that you could make platic injection molding at home.

@ActionBOX 2 жыл бұрын

@@Hvandersleyen Have we convinced you to build your own? Cheers

@ashokshrestha7427 2 жыл бұрын

@@Hvandersleyen Absolutely, never thought there could be a desktop-sized plastic injection molding machine. You guys @Action Box are genius.

@daringdarius5686 2 жыл бұрын

Just came across this video and these guys right now. This is pretty much my exact response xD

@williamsouthall1048 2 жыл бұрын

Absolutely incredible. I'm not sure if you've ever watched the MakerBot 3d printing story. But you guys have now tapped into the category with desktop injection molding. Making it the most simple design I've seen yet. I hope the precious plastic team is able to get ahold of this design as well. You guys are awesome!

@ActionBOX 2 жыл бұрын

Thank you, I appreciate that comparison. Cheers.

@williamsouthall1048 2 жыл бұрын

@@ActionBOX no problem. I absolutely love your open platform and work to help the community better than them. Keep up the good work absolutely love this! Really hope to build one for myself!!

@yngndrw. 2 жыл бұрын

This is a really nice machine for small runs or testing molds. I'd like to suggest two changes: 1) Attach a second ground wire to the heated tube as this only has minimal surface area connecting it to the rest of the chassis and the band heaters are mounted to it. 2) Connect an adjustable timer module to the switch for the hardening time so that it can be set and consistently repeated. 3) For the mold, you might be able to add a couple of extra ejection pins which push directly on the other half of the mold and a bolt to pull the ejection pins into the mold, so that you can release the two mold halves and the part in one motion by tightening that bolt. That would remove the need for the screwdrivers / screwdriver slots and the the hammering. Bonus points if you can use a small pneumatic cylinder mounted directly to the mold to actuate the ejection pins instead.

@ActionBOX 2 жыл бұрын

I must say Andrew, these are some genius suggestions. I will do all three. Thank you.

@ethanthomas5637 2 жыл бұрын

Great design! I’m going to try a pneumatic clamping system instead of bolting mold halves together. I will place the thermocouple in the sleeve where convection is not likely to offset chamber heat transfer as much. Also, the chamber holds around 1.7 cubic inches for anyone wondering.

@sjones1234 2 жыл бұрын

They sell mold release, we use it in industrial injection molding all the time, that should help you get the parts out without the vise. Really impressive and that's coming from a career tech who has been doing that professionally for 5 years.

@ActionBOX 2 жыл бұрын

Thank you Mr. Jones, I appreciate that coming from a professional. I think you would really appreciate the V2 design once we film it 😊. Cheers, Dave

@judd_s5643 2 жыл бұрын

Why don’t you mention the brand of the mold release you use. Contribute to the project.

@sjones1234 2 жыл бұрын

@@ActionBOX Check the company PPE - Plastic Process Equipment. Almost every injection molding company gets at least some supplies from them, they have everything from brass tools and fittings, to sprays (mold release, rust preventative) all the way up to blank mold frames. They sell various screw on nozzles with different profiles (for instance if you are using nylon material there is a nozzle specifically for that resin) You should be able to get a lot of parts off the shelf for your next project from them.

@mcdirty311 2 жыл бұрын

Will be following developments on this closely. Nice work!

@BrianMaynardLetsDoThisThing 2 жыл бұрын

What a beautiful machine. The results speak for themselves. Can’t wait for version 2

@ActionBOX 2 жыл бұрын

Thanks Brian 😃.

@DimensionMachine 2 жыл бұрын

I have seen the video on your larger machine. In a way this is almost more impressive simply because despite its simplicity relative to the larger machine it is still able to achieve the same thing. Very well done!

@ActionBOX 2 жыл бұрын

Thanks! You’re right, this machine does achieve the same results in a simpler way. The one downside is that it’s not automated like our other machine, so we need to reopen and close the mold before each injection. Glad you enjoyed the build!

@gergelyfazekas7285 2 жыл бұрын

This is the first video I've seen on this channel, and I subscribed.

@ActionBOX 2 жыл бұрын

Thanks Gregely! We’ve got many other cool projects coming soon! Stay tuned 😃

@thomaswade3072 2 жыл бұрын

Fantastic work! Looking forward to seeing progress on the v2

@ActionBOX 2 жыл бұрын

Thanks Thomas! Make sure to subscribe so you don’t miss the V2 😉

@marsgizmo 2 жыл бұрын

great project! 👏😎

@ActionBOX 2 жыл бұрын

Thanks! 😊

@TheRoboboat 2 жыл бұрын

For the cross bar at the top you could use square tubing or something with structure to resist the bending while it presses. That probably help to prevent to push rod from going in at an angle.

@electronresonator8882 2 жыл бұрын

I suggest the thermocouples placed at the very top of cylinder, right below the holding funnel that is still made of metal, since heat does not transfer quickly, even if the bottom plastic is already a liquid, there's no guarantee that plastic at top is also liquid, so make sure that the top get the proper heat for liquid plastic, before injecting the whole cylinder to the mold

@ActionBOX 2 жыл бұрын

thanks for your comment. We actually intentionally left the top cooler so the plastic does not melt there. Otherwise if it melts and gets sticky it makes it very hard to load new pellets. Cheers.

@3d-obsession662 2 жыл бұрын

My suggestion for the thermocouple is in the center in between the heater bands.

@LordInfiniti 2 жыл бұрын

First thing that comes to mind is this would be a great way to reuse failed 3d prints. Just grind them up and inject them into whatever you have a mold for... Depending on how cheap something like this could be made for, and how accessible molds could become, I could really see a lot of 3d printing hobbyists getting one.

@ActionBOX 2 жыл бұрын

I love this comment. I promise to incorporate your idea in our V2 design 😃. In the meanwhile, feel free to share our video if you know someone who would like it. We are really trying to grow our channel. Cheers, Dave

@MFEeee 2 жыл бұрын

Nice. Glad that you share this information openly

@ActionBOX 2 жыл бұрын

Thats what we do 😃

@Psyphuck 2 жыл бұрын

You guys are awesome!

@qaiserhaider 2 жыл бұрын

Great design. Great work

@ActionBOX 2 жыл бұрын

Thank you 😃

@m9bettt 2 жыл бұрын

I think this design can be change to use servor motors such that compression molding of composite parts is possible without the need for curing in an oven.

@VorpalForceField 2 жыл бұрын

has to be the cleanest little DIY desktop injection machine I have seen ... nice work Thank You for sharing .. cheers :)

@ActionBOX 2 жыл бұрын

Thanks Tim 😃

@timgoodliffe 2 жыл бұрын

this vid was worth the watch. great content, and absolutly sending it on the production, look forward to the future of this channel

@ActionBOX 2 жыл бұрын

Thanks Tim! Glad you enjoyed the video 😃

@CliveBagley 2 жыл бұрын

Looks like it works rather better than I might have imagined. Good work so far and I look forward to seeing V2

@bigmechanics 2 жыл бұрын

Great design Love the work !

@IvaTarCompany 2 жыл бұрын

Молодцы ребята! Удачная и компактная конструкция.

@ActionBOX 2 жыл бұрын

Thanks! 😊

@rosshall8067 2 жыл бұрын

I love you're guys' videos keep up the awesome work. You have no idea how helpful these things are, you're filling that perfect niche of small time tinkerers wanting to be able to produce consumer level products

@ActionBOX 2 жыл бұрын

Thanks Ross! Reading comments like this one makes all our efforts worthwhile! 😃 Do you have any plans to build a machine?

@rosshall8067 2 жыл бұрын

@@ActionBOX I absolutely will once I have the funds to make one. I've made a lot a 3D models that I've always wanted to injection mold, but never had the ability too, so this is definitely a project that I'll have to take on. 😀

@RavenMinis 2 жыл бұрын

Excited for V2!!

@ActionBOX 2 жыл бұрын

Us too 😃. Thanks for your support

@joelongstaff7601 2 жыл бұрын

WOW that about covers the way your video left me. I recently finished building a shredder for plastic with the idea of trying to build an injection machine. With your video it should be no problem. We like to make arduino projects and thought it would be cool if we could inject our own boxes. Now because of your sharing it will happen. I need to order a PID and more cartridge heaters. So now we weight for the mail. MANY THANKS from a new subscriber. Keep well.

@ActionBOX 2 жыл бұрын

That’s awesome, I’d love to see some pictures

@matthewmiller6979 2 жыл бұрын

Super cool! Can't wait for the plans(for everything) in your store!

@ActionBOX 2 жыл бұрын

Thanks Matthew! Glad you think it’s cool 😎 We’ll notify everyone through the channel when new products/files are available on our website. Cheers, Alan

@onesadtech 2 жыл бұрын

This is so cool! Congrats on your success so far, can't wait to see what V2 can do!

@ActionBOX 2 жыл бұрын

Thanks! 😄 V2 is coming soon… stay tuned!

@Haza3137 2 жыл бұрын

awesome work guys

@ActionBOX 2 жыл бұрын

Thank you 😃.

@dailybusiness8162 2 жыл бұрын

Nice job! Looking foward to V2!

@ActionBOX 2 жыл бұрын

Thanks! Glad you enjoyed the video 😃

@SianaGearz 2 жыл бұрын

This seems remarkably elegant!

@ActionBOX 2 жыл бұрын

Thanks! It was really fun to build 😃 Have you ever designed or built any fun machines (big or small)?

@crassbusinessman3122 7 ай бұрын

So glad I came across this channel. This is phenomenal.

@ActionBOX 7 ай бұрын

Haha welcome to Action BOX! We have a ton more cool projects in the works. Stay tuned! 🙌

@korishan 2 жыл бұрын

To increase injection pressure, you could change the design for the action of the pistons. Instead of contraction to inject, extend to inject. The amount of force is reduced on the piston head because of the rod. If the piston chamber is 2" in diameter, that gives a volume of 12.56sqin. At 120psi, that would be 1507 lbs (6703N) of force. Because there is a rod on the retraction side, and it's about 1" round, this cuts the force down in half. Which you mention as 3300N (741lbs) of force. So just by changing the design to extension to do the injection, you can still use the same size cylinders, and you'd get twice the force. This would keep the cost of the design down, and yield a more powerful unit. Another thing I would do is make the injection rod have a taper for going into the hopper. This would minimize any introduction of air that might get trapped on the end as it's plunged down into the plastic. It would allow for more precise auto-alignment.

@ActionBOX 2 жыл бұрын

Hey, thanks for the detailed comment. This has been considered, and the issue with the extension is that while it provides a little more force, it would require me to flip the cylinders around, which would make the machine 50% taller. I was looking to make the smallest possible form factor. As per the injection rod, it has a slight taper, but perhaps more will indeed help. Cheers.

@korishan 2 жыл бұрын

@@ActionBOX Yeah, flipping it over was the part I was tryin to figure out how to get around. Maybe there could be different versions available. Some ppl may not mind having a unit that is twice as tall. Me personally I have plenty of space for such a device. But I also get the reason for needing to keep it compact, as well. Great idea overall, though. I had been wondering about injection molding and how to go about it. This seems about as simple as you could get, to be honest. Job well done guys! 😎

@realRickSanchez 2 жыл бұрын

You guys head and shoulders above every similar channel, looking forward V2.

@ActionBOX 2 жыл бұрын

Thanks Rick! We love to hear that 😎 Glad you enjoyed the video!

@MrSpeakerMBurns 2 жыл бұрын

You should have two thermocouples and two temperature controls so you can heat the "zones" independently.

@ActionBOX 2 жыл бұрын

Thanks Jason. I will add that to my notes for the V2. Cheers.

@RichardThompsonCA 2 жыл бұрын

This is a great project. I'm currently working on my own injection machine using an arbor press as a foundation.

@ActionBOX 2 жыл бұрын

That’s awesome, that’s also how I started. I would love to see some pics of what you’ve made so far. Cheers, dave

@RayIrv 2 жыл бұрын

Glad i found this channel! ... Keep up the good work, while im watching all your previous videos! :D

@ActionBOX 2 жыл бұрын

Thanks Raymond 😄 we’ve got lots of cool content coming soon!

@user-pw8ps4ty7j 2 жыл бұрын

Very underrated channel for sure! Keep on being cool

@ActionBOX 2 жыл бұрын

Thank you! We’ll keep on being cool 😎 Feel free to share with others you think would also find our channel interesting. Cheers, Alan

@OrinSorinson 2 жыл бұрын

Pretty cool stuff, guys. This one actually has me thinking about a future project. Maybe even at a smaller scale. It would give me something to do with all the print trimmings.

@ActionBOX 2 жыл бұрын

Great idea. Hopefully when we make the V2 available for purchase you will have use for it 😉.

@gunsmoke132 2 жыл бұрын

@@ActionBOX if the V2 is as solid as i think it'll be and for a reasonable price, go ahead and link the purchase link once it's ready :)

@Miniac 2 жыл бұрын

Such an awesome prototype. Keep it up, guys! I already want to build V2 for my own purposes!

@ActionBOX 2 жыл бұрын

Thanks, that means a lot. We are working on it and should have the video out in under 2 months. Cheers.

@RavenMinis 2 жыл бұрын

Elf stuff happening???

@neogator26 2 жыл бұрын

That is a fantastic proof-of-concept build.

@ActionBOX 2 жыл бұрын

Thanks for your support 😊

@amicloud_yt 2 жыл бұрын

This is amazing! I can't wait for the V2 video. I'm gonna have to build one of them myself!

@ActionBOX 2 жыл бұрын

Awesome, we will be making the kits available so make sure to stay tuned 😊

@amicloud_yt 2 жыл бұрын

@@ActionBOX

@Mogy336 2 жыл бұрын

Amazing and simple design

@ActionBOX 2 жыл бұрын

Thank you 😊

@flappydoo100 Жыл бұрын

If you ever start making parts with thinner walls or more complex geometries, add flow controls to your airlines. By controlling your injection velocity it can reduce/eliminate any burn marks you may have on smaller parts. Also, i saw another comment saying to add a release angle to your molds, you will absolutely need to do this in the future if you want to save your molds a beating from the hammer. Also, try playing around with your injection pressure/packing pressure regulation. By lowering your packing pressure you can save unnecessary wear on your molds as well.

@NFL_31258 2 жыл бұрын

There are enough details in this video for DIY folks to reproduce, thanks for that.

@ActionBOX 2 жыл бұрын

Thanks for the donation Ali and so glad you enjoyed this video. If you end up reproducing the machine, be sure to reach out and let us know the results. We will be making the Injekto 2.0 kit available in our next video (coming out next month) so hopefully you will have access to all the parts you need to reproduce our machine 😃. Cheers, Dave and Alan

@Rodrigo8 2 жыл бұрын

As with industrial machines, the "problem" is the mold parts. You can sell CNC molds service.

@guillermopatino3928 2 жыл бұрын

Wow. Good small injector to learn from.

@ActionBOX 2 жыл бұрын

Sure is, Thanks for watching.

@kattsmatter26 2 жыл бұрын

WoW.... and WoW again. Love Ur work. After rebuilding factory machines. I now can see how to build small shop machines. U guts are great.

@ActionBOX 2 жыл бұрын

Thanks 😊 we appreciate it.

@gunhugger16 2 жыл бұрын

Dude, I need to make this. Thank you for showing us

@ActionBOX 2 жыл бұрын

For sure. We plan on making the V2 mechanical parts available as a kit. Cheers, Dave

@AlexA-tj3jj 2 жыл бұрын

Good job guys. Keep the good job.

@ActionBOX 2 жыл бұрын

Thanks Alex! Glad you enjoyed the video 😃

@mattheww9656 2 жыл бұрын

This is really amazing - congratulations. Your videos are great!

@ActionBOX 2 жыл бұрын

Thanks Matthew! Glad you're enjoying them 😊

@user-pw8ps4ty7j 2 жыл бұрын

You guys make such cool stuff! Glad I found your videos on Reddit!

@ActionBOX 2 жыл бұрын

Thanks! Our goal is to share as much cool stuff as we can 😃 Glad enjoyed the video!

@jcmendoza8285 2 жыл бұрын

Fantastic Video!

@ActionBOX 2 жыл бұрын

Thanks 😃

@gilldesigns6980 2 жыл бұрын

please continue on this. This is valuable research for small businesses and entrepreneurs

@ActionBOX 2 жыл бұрын

We’ve got some updates on this machine coming soon 👀 Stay tuned!

@EricHaskins71 2 жыл бұрын

Just stumbled on this channel!!! Yes!!!! I am modding my Grizzly G9729 Mill lathe combo and I built a Lowrider v2 to use to make a bigger CNC but I want to build one of these for sure subbed and all notifications on

@ActionBOX 2 жыл бұрын

Welcome aboard!

@heathenxyt 2 жыл бұрын

Well done.

@ActionBOX 2 жыл бұрын

Thank you! 😊 Glad you enjoyed the video!

@nworegonfishing5876 2 жыл бұрын

Great product

@ActionBOX 2 жыл бұрын

Thank you 😃

@MisterWillX 2 жыл бұрын

This is a great design!

@ActionBOX 2 жыл бұрын

Thanks! We’re releasing the enhanced V2 very soon so stay tuned. We show a sneak peek of it in our latest video here: kzfaq.info/get/bejne/p9Woq9yl2d2XeIU.html Cheers, Alan

@erjonameti1066 2 жыл бұрын

Nice project. Keep it going.

@ActionBOX 2 жыл бұрын

Thanks Erjon! Glad you’re enjoying the content 😃

@Scoobarruu 2 жыл бұрын

Wow! Zis is Давид from Volleyball! Exquisite work Dave and Alan!

@ActionBOX 2 жыл бұрын

Thank you 😊. Glad you enjoyed the video.

@coulterjb22 2 жыл бұрын

You’re hitting my sweet spot. I was maybe three months from building a desktop injection machine…..I hope I can wait on your design. You guys do such a nice job designing these accessible tools, keep it up!

@ActionBOX 2 жыл бұрын

Thanks! Good for you for attempting to build your own machine 👏 We’re hoping to have the V2 ready in the near future. Stay tuned 😃

@coulterjb22 2 жыл бұрын

@@ActionBOX I put a small one together that was designed by Buster Beagle 3D that works amazingly well considering the cost. He is working on his 3rd version that uses the hydraulic cylinders similar to what your's demonstrates. I'm staying tuned!

@karim1485 2 жыл бұрын

I love this channel! See you at 1 Million subs :)

@ActionBOX 2 жыл бұрын

Thanks Ka, We really hope to get there as well 😊. Feel free to give us a head start by sharing this on forums or other groups you may know where they would be interested. We already got some of our videos on HACKADAY. Thanks in advance, Dave

@speway 2 жыл бұрын

I found in impossible to leave the channel without subscribing. The vid was captivating...in the most literal sense..

@ActionBOX 2 жыл бұрын

Thank you 😊. Glad you enjoyed it and thanks for subscribing.

@rhyslewis2204 2 жыл бұрын

Beautiful

@ActionBOX 2 жыл бұрын

Thank you 😊

@luigimonaco7826 2 жыл бұрын

Geat work, compliments! To improve the design you could do the following: 1) Take care of tube length from pressure origin to delivery point to be exactly the same, air volume is critical in pressure delivery. 2) Drill two holes in the lower, middle front and back plate to press through a hardened steel pin to support the lower part of the cylinder. Still great work, kudos for sharing.

@ActionBOX 2 жыл бұрын

Thanks for the tips!

@davomoto42 2 жыл бұрын

Fantastic design! Great job! From the CAD model it looked like the nozzle is chamfered, you will get better contact with a radius instead. The mold needs to be machined with a matching radius, it doesn't need to be a small radius, either. You want the most surface area possible.

@ActionBOX 2 жыл бұрын

Thanks Davo 😃. We are limited by items we can purchase off the shelf to keep the cost down for our viewers but you are indeed correct. I’ll see if we can employ your suggestion for our V2 video. Cheers

@Whydyouchangemyname 2 жыл бұрын

This looks great guys. You guys really are underrated

@ActionBOX 2 жыл бұрын

Thanks! We’re only getting started 😎 Feel free to share with others you think would find value in our content - it helps us grow! Cheers, Alan

@tsuoyamaida 2 жыл бұрын

THIS ITS AMAZING

@ActionBOX 2 жыл бұрын

Thank you 😃

@CNCEVOLUTION 2 жыл бұрын

Nice build

@ActionBOX 2 жыл бұрын

Thanks 😊

@prototype7970 2 жыл бұрын

Great video nice machine ! Easy to make and very compact !

@ActionBOX 2 жыл бұрын

Thanks! 😃 Do you have plans to build your own machine?

@kapong 2 жыл бұрын

Great job!

@ActionBOX 2 жыл бұрын

Thank you 😊

@dunichtich100 2 жыл бұрын

Great video and work guys 😊👍🏼 You have a bright future ahead of you ;)

@ActionBOX 2 жыл бұрын

Thank you! We really appreciate it 😄

@kenreynolds1000 2 жыл бұрын

Haha you got me. I didn’t guess that it was a simplified injection molder after watching the level the automatic unit. I couldn’t see the ram in the IG picture. Cool project.

@ActionBOX 2 жыл бұрын

Thanks Ken! Glad you came back and watched the video (a true fan) 😃 Stay tuned for more cool videos! Cheers, Alan

@kenreynolds1000 2 жыл бұрын

@@ActionBOX you should look at making plastic extrusions with your machine . You could build dies and extrude a couple feet of edge/corner trim etc. The dies are simple compared to IM. Could it be done small scale? I know the big extrudes usually waste the first 20 ft or so and that goes back to remelt.

@ActionBOX 2 жыл бұрын

@@kenreynolds1000 can you send me a picture of the molds that are used? If the dies aren’t too complex I can give it a shot.

@kenreynolds1000 2 жыл бұрын

@@ActionBOX sorry, I only spec the cross sections and colors from my suppliers. Employer’s IP. I have only seen people making filaments or larger HDPE “lumber” on YT and thought it would be cool to see refined products like your boxes done small scale.

@ActionBOX 2 жыл бұрын

@@kenreynolds1000 thanks, I appreciate that 😊

@attilabalazs5903 Жыл бұрын

Finally, a DIY project which are actually DYI project doesn't need exotic tools or professional workshop to make them. (If it's your hobby, you probably have a semi-basic / advanced tools already, but you don't need a full-size metal lathe)

@JasonHejna 2 жыл бұрын

Very cool!

@ActionBOX 2 жыл бұрын

Thanks Jason 😃

@tomy983 2 жыл бұрын

I like it, a lot. I was wondering if you have an idea about the maximum volume it can be used for.

@ActionBOX 2 жыл бұрын

We mention it in the video closer to the end. We did a test. It was 27.6grams. Cheers 😊

@mymusicmymoney Жыл бұрын

Super cool!!

@ActionBOX Жыл бұрын

Thanks 😃

@Rustbeltrescue 2 жыл бұрын

Do you guys have a time frame on when the V2 video will be out because I'm seriously excited to see what you guys make!

@ActionBOX 2 жыл бұрын

I’m about two months we should have this available. Cheers

@girrrrrrr2 2 жыл бұрын

From what ive seen, its best to have several heaters in this style. So that the chamber is warmed up evenly, so maybe have two heaters and two thermocouples and two pid controllers? or some pid controllers take in multiple thermocouples, which would be even more ideal just plug in 2-3 in dividing sections and go from there

@ActionBOX 2 жыл бұрын

This is an awesome recommendation. We have already implemented it into the V2, and you are absolutely correct. Cheers.

@dumdidumdumification 2 жыл бұрын

Nice design

@ActionBOX 2 жыл бұрын

Thank you! 😊

@swamppifi6186 2 жыл бұрын

Now this is cool......well done.

@ActionBOX 2 жыл бұрын

Thanks you 😃 . Don't forget to help me out by sending the video to others 😊

@frankyehphoto 2 жыл бұрын

I really like the engineering approach you guys take to design these small shop friendly machines. The biggest barrier for most DIYers will be the access to a lathe or a CNC milling machine. It would be cool to see you venture into selling some of the critical components at a budget friendly price.

@ActionBOX 2 жыл бұрын

We will do that in the V2 for sure to help get these into peoples hands. Cheers

@frankyehphoto 2 жыл бұрын

@@ActionBOX much appreciated. Keep up the amazing work!

@ItsMeLuke69 Жыл бұрын

Omg I love you. This is amazing.

@bradthesing Жыл бұрын

If you preheat the mold, you can make bigger parts. In large production runs, the molds are designed to run at a higher temps. Some also included cooling to keep them from getting to hot.

@ActionBOX Жыл бұрын

Thanks for the tip 😃

@klausloehmann1691 Жыл бұрын

The mold will anyway be hot after some shots, after ten shots you need thick gloves to touch the mold.

@Neutronity Жыл бұрын

You are insane … in a good way … and in an 11 minute video you enabled me to build a machine to start a small business idea which would not be possible otherwise

@ActionBOX Жыл бұрын

Thank you 😃, much appreciated. Make sure to check out the INJEKTO 2.0 video that we released as well. It is much better.

@Neutronity Жыл бұрын

@@ActionBOX Version 2 looks amazing but sadly a bit more kit based than a diy repeatable build

@forestbrother7772 2 жыл бұрын

You could consider using a slight angle on the side walls of your mold (draft angle) to improve separation.

@ActionBOX 2 жыл бұрын

That’s a great idea haha. I’ll be doing that for the next time for sure. Cheers, Dave

@torokzoli 2 жыл бұрын

A really small angle is enough, about 0.5-1 degree only

@okee2597 4 ай бұрын

dont let anyone tell you that you are useless or anything. yall are amazing. And most importantly needed in this world

@ActionBOX 4 ай бұрын

Thanks for your support 😃

@Nathan_Chao 2 жыл бұрын

This is so cool

@ActionBOX 2 жыл бұрын

Thanks Nathan! It was really fun to design and build as well. Do you have any plans to build any sort of machine?

@SimonSozzi7258 2 жыл бұрын

Very cool 😎

@alirezabagheri3979 2 жыл бұрын

very good thanks

@ActionBOX 2 жыл бұрын

Thanks 😃

@567891100 2 жыл бұрын

I used to do wax injection and we heated the molds to help the wax flow. I am sure you could increase the size and complexity with heated molds. Nice design, i might make one.

@ActionBOX 2 жыл бұрын

Awesome idea. We have tried that and it works, but the cooling cycle takes too long, and the complexity makes it much larger. Might try again in the V2. Cheers.

@MakenModify 2 жыл бұрын

nice! I'm currently using a (smaller) hand powered diy machine. I was thinking about converting it to air now I feel even more tempted ;) Looking forward to your V2 and great video as always :D

@ActionBOX 2 жыл бұрын

Haha glad we inspired you to convert to air! Did you build your current machine by yourself?

@MakenModify 2 жыл бұрын

@@ActionBOX yes, had an old arbor press (I can only lift it when disassembled). I just added a plunger and a steal barrel, two heater bands and a PID controller. works pretty good with literally tons of force. But it's hard to get constant results due to varying speed and force when manually operated. Also have a concept (and some parts) for a fully automated machine but don't know if I'll ever find the the to do it. So I enjoy seeing you guys do such things ;)

@ActionBOX 2 жыл бұрын

@@MakenModify love it. Thanks again for your support. We have several more injection machines planned out for the future so I guess you will see them as we build them. Cheers