No video
How you can make thick floating shelves
Рет қаралды 78,496
Күн бұрынFacebook: / kgwoodworking218
Instagram:
/ kg_woodworking
@efunkyman6853 2 жыл бұрын
I can really appreciate that you take your time. The true essence of measure twice and cut once. No music. Just the sounds of work and a few crickets. Beautiful job and I will give my best effort to be as diligent when I build my shelf. Thank you for sharing such more than just a wood building video.
@jyotiwelry Жыл бұрын
This is a valuable addition to my woodwork collection kzfaq.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.
@DarrellWeavercom 2 жыл бұрын
Great work! Simple yet very well done. I watched this just before heading out to my shop to create the same thing for my wife. Thanks for helping me potentially appear like a pro like you!
@DonML83 5 жыл бұрын
You make it looks so easy! I can't believe you can use that spray machine to finish the top coats and had a good results. ...excellent!
@andrewwoodman9974 4 жыл бұрын
I need to build one of these four my wife. I hope I can get my joints to look that good. I might have to get a couple new tools for this project. 😉 Thanks for the video and nice job!
@Mid-Valley-Clean 2 жыл бұрын
Great job buddy
@dianeernest1660 4 жыл бұрын
Very good job . You are an expert at carpentry
@Kayleefine3768 4 жыл бұрын
That’s some really good work!
@kristianaali1411 2 жыл бұрын
Wow!!! So pretty
@j.wat.3437 4 жыл бұрын
All I have is a hand saw, hammer and a pack of nails. Can you show me with that?
@brandoncjgrimes Жыл бұрын
what kind of wood is that good sir?
@thewoodworker1703 5 жыл бұрын
Nice result well done
@neriovera 4 жыл бұрын
What kind of wood did you use ? And what color stain is that ? I have a little hard time trying to select a stain color that gives me the same dark color you achieved. I think is the wood I am using.
@garyteague9555 5 жыл бұрын
great idea
@consuelom32 4 жыл бұрын
I need help. I purchased a large one 3 years ago just like the one you have here. Now I see the base is coming off the wall. Should I add a few screws , before it falls?? And what kind/size of screws. Please help
@MrGig128 4 жыл бұрын
Hmm...can you tell why the base is coming off of the wall? Is the wood warping? If it's not too bad you might be able to take it off, add a strong adhesive and screw it back on, making sure to screw into the studs. I think using a screw that had a washer head/lag would be your best/strongest option. Hope this helps, good luck!
@consuelom32 4 жыл бұрын
@@MrGig128 thank you so much for your advise.
@Andy-in8ej 3 жыл бұрын
Digital angle reader should really be zeroed on the saw bed, not the vertical blade.
@DetailEnthusiast 4 жыл бұрын
What color stain did you use? I like it.
@thunderbeast3976 4 жыл бұрын
Detail Enthusiast I believe he used Minwax Wood Finish Penetrating Stain Red Mahogany 225
@thunderbeast3976 4 жыл бұрын
Minwax Wood Finish Penetrating Stain Red Mahogany 225 stain 👍🏼
@rehmanrana8607 4 жыл бұрын
What kind of woode you are using?please n where we can get it?
@jasonmonteleone7453 4 жыл бұрын
Legit
@suzanx 3 жыл бұрын
Do you make them to sell?
@miguelmendez8899 5 жыл бұрын
Oh you talk 😂
@michaelgibson6166 4 жыл бұрын
WHO PICKS UP THERE GLUE LIKE THAT !
@Andy-in8ej 3 жыл бұрын
Moron
@danielvalentine287 5 жыл бұрын
There’s a pretty easy when you got enough money to buy every tool you need. Try that with the $40 circular saw from the local pawnshop and a 16 foot tape measure half broken then I’ll be impressed
@MrGig128 5 жыл бұрын
Can you do this with a circular saw? Yes. Can you do this with a 16ft tape measure? Yes, you could do it with an 8 ft tape measure if you wanted to. Does having a table saw and miter saw help? Yes, of course it does. You can make whatever you want with whatever you have. Don't feel the need to bash other people for making something with what tools they have. By the way, it does kinda sound like you are impressed....impressed with "having all the tools I need" 😂....come on now, every woodworker knows they never have enough tools!
@djsmith6247 4 жыл бұрын
KG woodworking Maybe you should buy and wear a pair of safety glasses to add to your expensive tool collection.
@Andy-in8ej 3 жыл бұрын
A good craftsman could do it, you are a useless idiot.
Insider Carpentry - Spencer Lewis
Рет қаралды 992 М.
Out of the Woodwork
Рет қаралды 705 М.