Tumble dryer not heating how to check & test the thermostat on the heater element Hotpoint Indesit

Рет қаралды 44,800

Күн бұрын

This video is on Hotpoint and Indesit tumble dryers can also use be used on Ariston or any dryers made by the whirlpool group. Visit our shop for hundreds of tumble dryer parts b.link/v3n5wpwk
These dryers now have 6 thermostats and cut-out safety stats fitted and a 2400-watt heating element. we will not only show you how to test all the thermostats and the heating element but we will also show you how to prevent your tumble dryer from overheating
we are working on an Indesit I1d80wuk or Hotpoint H1d80wuk Vented Tumble Dryer but the video is similar to other models.
▶ My review on this dyer I was working on Indesit I1d80wuk, Hotpoint H1d80wuk
• Unboxing review and se...
▶ Tumble dryer repair video playlist
• Which Tumble Dryer to ...
▶ Video on bearing system drum shalt
• How to replace a Tumbl...
if you are needing new or used parts for your Tumble dryer in the future please visit the website and use your full model number
🛒 www.how-to-repair.com
🛒 Heating element J00820559 C00729740
🛒 Vented DR10 Side One Shot Stat 185° J00944213 C00849444
🛒 Heater/Stat Kit one shot 143&150c Cyc 120c J00820559 C00729740
🛒 Drum Safety Thermostat 91°C J00872913 C00781057
🛒 Duct safety Stat (waiting for part number sorry
00:00 How to stop Tumble dyers overheating.
02:54 Where are the tumble dryer thermostats located.
04:22 Who to take the Tumble dryer apart.
08:00 Testing Tumble dryer Heating element Hotpoint Indesit.
12:08 Testing C00729740.
15:53 Duct safety Stat & Energy Save Thermostat 58C J00872914 C00781058.
17:30 Drum Safety Thermostat 91°C J00872913 C00781057.
20:18 Testing the heating system with an amp meter.
22:16 Wiring Diagram
23:00 Tumble dryer still not heating after checking heater & thermostats.
23:40 Support our website www.How-to-repair.com

Пікірлер: 46

@scotsiain1970 Жыл бұрын

Excellent tutorial, the manufacturers mustn't like you, showing us how easy it is to fix rather than go out buy a new machine!

@MichaelDobbs-vh9oz 2 ай бұрын

Absolutely first class. Talked & walked me through replacing the heating element & made it so easy - Genius !!

@How-to-repair Ай бұрын

Hi @ @MichaelDobbs-vh9oz thanks a lot for your comment. It would be really helpful for me to get my video seen, as I'm no IT expert, to either share the channel or at least post it to your friends. My videos might not be KZfaq superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍

@markkeating3522 Жыл бұрын

No heat output. Followed your video and checked the stats using a multimeter. Found the faulty one, ordered and replaced it and back up & running. Your video saved me £200! Big thanks

@How-to-repair Жыл бұрын

Really glad we were able to get your tumble dryer up and running you can do us a favour though subscribe to the channel as that does help us have a great New Year with the well saved money glad we could help you @markkeating3522 this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@retepgproduct4522 6 ай бұрын

Just bought this dryer, thank you for sharing your great knowledge.

@Pherral 11 ай бұрын

Great vid, different model but exactly what I needed to see

@SolarWaterHeating Жыл бұрын

Thanks for helping find the blown thermostat. Great Help !

@How-to-repair Жыл бұрын

Thankyou For leaving a comment this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's is was keeps this channel going. Thanks 👍

@victorldunn9638 Жыл бұрын

Thank You! - Having watched your video - and finding a screen-grab of the circuit diagram on the web - I was able to go through the various combinations of the 4 wire heater connector to trace the fault to the lower element, with the upper element and thermostats all OK. 😊👍

@How-to-repair Жыл бұрын

glad it was helpfull @victorldunn9638 this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@williamgleadell659 Жыл бұрын

A great presentation and very informative

@How-to-repair Жыл бұрын

Glad you liked it! i know you have already subscribed but its a thank you any way Thank you For leaving a comment this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@user-pp3td9hb2p 5 ай бұрын

Thanks I actually understood that and am going to give it a go!!

@johnfitzsimmons3171 3 ай бұрын

Thanks for that insight taking the machine apart , locating fault, very well explained nice one 😊.

@How-to-repair 3 ай бұрын

Glad it helped you with your dryer, please remember to share it Wrinkly hands fix appliances, not algorithms! My videos might not be KZfaq superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @johnfitzsimmons3171 please remember to subscribe to our channel as that really helps us kzfaq.infoe432SAb2g08 Thanks, Paul 👍

@omarmrd Жыл бұрын

Excellent video, many thanks Sir.

@How-to-repair Жыл бұрын

Glad it was helpful! @omarmrd this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@davidfenollosa5715 Жыл бұрын

Superb. Thanks a LOT for sharing. I've been this morning in a hotel here in Spain, trying to repair a Hyundai condenser tumble dryier. The motor and fan worked fine, filters are clean, both klixons were ok, as well as the rear and front NTC's. The resistances didnt seem ok, as I got weird values (about 300 kohm for low and high resistances) After dismantling the back of the machine and checking all the components I just mentioned, I switched the machine on, to see again what happens. The machine didnt start, because the problem now was that the display showed error E5, which is Open Door, even though the door was closed. Before, this error didnt appear. I took out the front panel to have fully access to the door microswitch, and after checking it with the tester, I confirmed it worked ok. The wire coming into the microswitch comes from the supply wire, and the wire coming out goes down (instead of going to the electronic card), to the area were the motor is, which causes I couldn't track it (as I had to leave soon), and check for any wire interruptions, which would be a reason for showing Open Door error. Since this is not an old machine, and a relatively well maintained one, my diagnostic is that there's a problem with the electronic card, as well as with the resistances. Another thing is, the user told me that apart from not heating, the differential switch often cut the power while the machine was working, althoug not always. In fact I didnt see it happen.

@shiningsunshine6499 Жыл бұрын

Great video, always very helpful! 😀👍

@How-to-repair Жыл бұрын

Glad you like it Thank you For leaving a comment this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@fernandomatias5514 Жыл бұрын

Very good.

@How-to-repair Жыл бұрын

Thank you For leaving a comment this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@dawidos117 Жыл бұрын

Thank you!

@How-to-repair Жыл бұрын

Glad I was able to help. Hope you have a good Christmas please remember to subscribe as that's is was keeps this channel going. Thanks 👍

@rickyn1135 Жыл бұрын

I purchased one of those small ‘portable dryers’ from Amazon. 110volt. It worked great for 3 months and now it doesn’t even turn on,Heat,timer,tumble. Nada. Nothing works outlet has power. I paid over $300 USD 3-4,years ago. Now,I’m afraid to buy a new one and brand. Any ideas of what a new dryer would cause this ? Danke.

@roymercer7043 7 ай бұрын

Thank you for the tutorial😊 can you recommend a reliable simple vented 9kg dryer please.

@drewlawrence696 Жыл бұрын

Great video. Would it be possible to tell me if there are any other thermostats along with their location (apart from the heating element unit thermostats) on an Indesit (idc8t3) condenser TD ? Not heating, tested the element and thermostats on the heating element-unit and I have continuity and circa 45/92 Ohm for single/both elements. Still no heat, motor, drum, pump are all good.....a little perplexed, but there must be another thermostat somewhere, just not sur where. Hope you can help (fingers crossed).

@meguinness1116 7 ай бұрын

my dryer heater element got 3 wires....at the machine connector side the colours are black ...red..yellow, by looking at the inside the element i see 3x wires connections....2x red and 1x yellow, how would i test for this? wich wires? thanx

@sadiporter2966 Жыл бұрын

Good tutorial. It is a shame that indesit/hotpoint don't have any vented models that have sensor dry. You can't get a hotpoint/indesit condenser machine with sensor dry for under ~£297 either whereas beko sell them for just £220.

@WalkWithPedro Жыл бұрын

I just changed my heating element in hotpoint machine. Everything seems fine but it was off for a month so not sure if I’m smelling smoke? Would changing the element cause that?

@yvonnebarnes48 Жыл бұрын

help !!! where can we purchase a pruple spot thermastate kit ???...cant seem to fine one anywhere...

@arejaz21111 Жыл бұрын

my indesit tumble dryer doesn't heat enough, stats are good beside the element and element itself is good. What could be the issue? cos if i dismantle my dryer further to locate other stats they would show continuity on the multimeter. How would i know if any of them is faulty?

@jaafarahmed9980 8 ай бұрын

Hi pal I have changed heating element worked well for one week then stopped heating again what should I do thanks

@zarahansund5356 Жыл бұрын

👍👍👍

@paulb9769 Жыл бұрын

Hi I had a yellow dot thermal fail on the neutral on the heater what could have been the cause? The condenser was completely clogged. What is the spec replacement I need?

@How-to-repair Жыл бұрын

Without having your model number, I find it very hard to help you. Please could you use the website with all the correct details. Hi Paul B I will need the full model number of the identification plate please use our contact us page and make sure you fill out the request of what part you are after and will get back to you within 24 hours normally www.how-to-repair.com/help/contact-us/ this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@rogerstroud4102 Жыл бұрын

I have this machine how do you test if the timer is faulty checked everything else per your video and ok any advice would be helpful. My machine is just out of warranty and us totally dead.

@How-to-repair Жыл бұрын

I'm unable to tell you the wires to test because this manufacturer does not give me the workshop manual for the wiring, but I would say if you have 240 V going to the timer then you know everything is good and if you have tested all the other components, this would point me in the direction of telling you that the timer could be faulty glad we could help you @rogerstroud4102 this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@hotpointbrownlover3365 Жыл бұрын

will this work on a splendide tvm63x

@How-to-repair Жыл бұрын

should be very similar Thankyou For leaving a comment this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's is was keeps this channel going. Thanks 👍

@radioman1170 Жыл бұрын

Followed your video as we have the same model. You didn't mention the reset on the thermostat on the SIDE of the heater that causes the dryer to run cold. Press a paper clip into the hole until you feel it click. Test it on your multimeter for continuity too. Why this isn't the old 'red button' I don't know!?

@How-to-repair Жыл бұрын

Some of the thermostats do not have a reset button. You are lucky. Have a great Christmas and a happy New Year. glad we could help you @radioman1170 this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@alisonevans7668 2 ай бұрын

Thank you do much for this tip. It worked for us and saved us getting a new dryer. Very grateful. 😊