Google Pixel 3 Camera Replacement

Рет қаралды 3,453

Жыл бұрын

Use this repair instruction to replace broken main rear camera on a google pixel 3.
Buy tools and parts on AMAZON:
Screwdrivers set: amzn.to/2Dp1Rcm
Opening tools: amzn.to/31ejoR3
Magnetic Mat: amzn.to/2Rw4G2w
Tweezers: amzn.to/39rWix5
Buy spare parts on AliExpress:
Screwdriver set: ali.pub/1geuh0
Plastic Pry Tools: alli.pub/6dhrz1
Tweezers: alli.pub/6dhrts
Adhesive tape: alli.pub/6juxg9
Camera: alli.pub/6juxo1
More DIY repair guides on www.how-fixit.com
FOLLOW ME:
Instagram: / howfixit
Facebook: / howfixit
Twitter: / howfixit
* DISCLAIMER *
This video intended for general information only. We will not accept any liability for damage or injury caused while following this guide. Any reliance you place on such information is therefore strictly at your own risk. This video description and commentaries contains affiliate links, which means that if you click on one of the product links, I could receive a small commission.
* AFFILIATE PROGRAMM *
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
#howfixit #repair #googlepixel3

Пікірлер: 4

@uweschroeder 6 ай бұрын

Had to replace the failed rear camera. These instructions made it easy. Thanks!👍

@waldguy Жыл бұрын

This really is outstanding -- clear English, slow enough instructions, explicit parts list. I'm going to use this when I get my parts. Camera is jumpy and annoying.

@waldguy 7 ай бұрын

Did this today. Removing the back cover was the 2 hour challenge for me. I used a heat pad, heat gun, suction cups, etc. Finally, what worked was inserting a thin metal "feeler guage" to start the release. The rest of the instructions are clear -- just keep the screws in order and track those connectors and clips. I probably wouldn't have had to replace the camera. On examination, I noticed the gasket was encroaching on the barrel at the back cover; it was badly installed. On assembly, I made sure the lens could move properly.