As a fledgling network admin, I found this to be quite useful. Plus, I love the presentation style hehehe

You are indeed the ALMIGHTY! I’ve been trying to connect to my wireless ip camera for well over 2 weeks now, and tried literally everything. Although this information for you, Gandalf, is nearly self explanatory, but for us, Hobbits, is a life saver!!! So this information might well be the KEY to get to my wifi ip cam’s web UI. Thank You!! God Bless You!

I want to thank you for this. I recently picked up a used network device and the published defaults would not work. Additionally, the "Reset" button would not reset it to the published default IP of 192.168.0.254. Because it is older it is no longer supported by the manufacturer. I followed this and was able to get that the IP was 192.168.101.70 !!!! Logged in with default credentials and now I can assign a static IP. I was also able to confirm the device actually does more than have some LED's lit. So to those who say just do a reset, that is not always a viable solution. Just because something doesn't align with your own narrow world view does not mean it is useless. This is a very helpful video and is enjoyable to watch as well.

A real-world use for beginners looking to get into understanding packet capture use cases. Good job, Iranian dude.

Great explanation, this was the only place which I learned how IP address works. Thank you.

Thank you for this. I was in the very same scenario. Despite your video being 5 years old, it still helped me. Thank you.

Very... Very... helpful when you start on the ip address Maze. Good job

You have a very entertaining style.

I liked the way you explained. Thanks.

Wow! This was really informative and love the style of the presentation. Just what I'm looking for.

Thanks a lot. This really helped me to determine the static ip address of the used Engenius access point I bought recently which don't have a physical reset button.

Love this! Educational and entertaining. Thanks!

Brilliant, been looking for soemthing like this for a long time, thank you!

Thank you so much. I had a Swann POE camera that I bought used on Amazon (risky I know) that had an unknown static ip address. I had never understood wireshark but I'm glad I do now because I was able to see that the camera was making calls and not just a dud

Great video just what I was looking for.

Thank you so much, this video saved a lot of time for me. I was going to replace the camera.

Great video, a common issue, thanks for teaching the thinking behind the solution, Subbed

OMFGGGGGGGGGGGGGG YOU ARE A LIFE SAVER, THANK YOU SO MUCH MAN

The pornstar reference made my day haha! You are the educator we need

Very cool and very well explained

Great work Thank you for taking the time to help!

OH MY,,,, thank you, sir,,, and thank you for your sense of humor I learned something good keep on doing more videos.

Ireally enjoyed.

Thanks, quite useful for troubleshooting my IP cameras...and oh yeah.....I just love that Persian accent :-)

that is exactly what ı was looking for. Thanks

he's funny but very lovely to watch

This was really helpful and helped me to track IP Address of camera.

This was GREAT!! And Much NEEDED!! Thanks

Outstanding video and tutorial. Saved me today, exact same example, trying to find a Reolink camera IP

Thanks! This is what I needed.

this is a lifesaver! thank you!

Very nice Knowledgeable. Thanks & Regards

Thanks for video, was fun and helpful

Thank you for the wonderful concept. I have an question can you help me with this.

in iran we say that your Tehraneis accent is killiiing me and we think thats beautiful

Thank you so much. Really helpful.

So the camera has its own gateway? I should use shark to find gateway of the ip camera, write down the ip on the browser and it will show camera log in form?

This worked for me....May want to add that some devices do not regularly broadcast their IP so powering off the device and turning back on made my device broadcast its IP address.

Great Job

Great Video very helpful 🫡🫡❤️

Very Helpful Video

Good work....very useful

Does typing arp -a into command prompt give you the same info as wireshark? Does it mean you don’t need the software?

Great stuff

Awsome man! But what if the camera is on a specific port? Can I use Wireshark to identify the port? Without the port number I would still not be able to reach the camera.

Hi there,it was brilliant idea .thankyou

When I execute the arp -a command it does not list all of the devices that are connected to my network? Also these devices are not listed in my routers connected device list? I would like to log onto some wireless bridges to configure them, but I can't determine their IP addresses.

Ah I see, you have to match to the clients primary hex values, silly me 😜 I should have guessed that because I did a similiar thing with connecting another router as a range extender only a few weeks ago but kind of the opposite and changed to match the host (just a little more complicated than that but not much). I've got an old ip camera that I wasn't so sure about but Ill try this and we'll see, thanks 👍

This was great!!!!!!!!

OMFG! I can't thank you enough! you saved my 5mp 30xoptical PTZ camera that had been reset a few times over a short period of time and for some reason I lost all ability to find it on my network and the paperwork that came with it no longer matched it's new Static IP "I don't have a clue how that happened, but it did......." I was lost and assumed that something on the board was dead but saw nothing obvious when I opened it and looked, green status light on the rj45 inlet steadily flashed so I knew it was trying to work and for some reason just couldn't be seen with device manager or my NVR , hell not even my Router could find it in the Network Map but this method of searching for the devices Static IP saved my ass from having to buy a new camera board etc for nothing. Thank you sooooooooo much! Truly.....

I'm pretty sure a ip search program (at least not the simple ones) were able to find the address since they usually do not change your host computers ip address therefore you wouln't be in the same network therefore the ipcamera could not answer the pings you would sent

NEW SUB!

Thanku bro❤❤❤❤❤ it’s workinggggg❤❤❤

So much drama! Lol! However thanks a lot, you helped me out.

same issue with my cctv! thanks man

star been using new cameras normally hik vision is my choice trying out the new qvis range putting 4 cameras on a switch from a wireless point 2 point could not get into the cameras with there default ip tried all 4 different downloads from the website to find the cameras on the network still no good had spent hours had to leave job embarrassing sunday job so no technical done over a 100 hik cameras this way spent hours at home again on a desk setup updated laptop tried the downloads got the data of the cd that come with camera installed to laptop via usb still nothing watched this video after searching how to find an ip out of range on a network bang download wireshark watch video finds the ip address straight away what an awsome tool to ad to my system ip was miles away from the default thanks for that qvis. thanks behfor for an easy to use how to video saved me taking half a day to sit athome to technical to sort this .

Thank You So Much !

YeeeeeeeeeeeeeAAAAaaHH!!!

Can you help me I have ip cemara I need to get the video of it to my python django project where I use open cv to get some other detail but I cannot find any way to get the video outside it's app

Hi Ben, love your style. Have you ever done a video on....How to connect a 4G camera with inbuilt sim card to say software like Blue Iris or anycam etc? (no modem at all) or is it not possible, cheers Gerry from Australia!

nice... thanx for sharing..

Great video but now how do i change that default IP address of 10.1.1.xx to my computers IP address which is a 192.xxx.xx number address so that i can then run my NVR and IP cameras on the same sub network. Thank you.

Good one.

love you

My issue that I change ISP so the gateway number change so I’m not able to find the camera because it was setup to the old gateway number, I don’t know if I explained myself well enough so please let me know.

Thank you!!!

excellent man excellent )

I connected my ip camera to laptop via Ethernet amd turn off my internet from wifi and start packet capture but no luck what I m doing wrong no arp packet I have seen do I have to turn on my wifi internet to get into work

Sir thank you so much

it worked with pc and camera but, I have a switch with static IP could not find the IP using your method, can you explain why?

This was massive and fun, I love it. hihihihihi

what if static ip but no default gateway ?

THANK YOU BRO!

Love this video, very informative. I have this exact same camera system and I hate it. It is nothing more than a time lapse system at best. This video demonstrates why this is such a junk system. Owners should not have to get this deep into this shit, and if so, it would be a lot better if Zosi had customer support in the U.S.A. Don't buy wireless, they are junk. POE is the way to go.

same for the OLT ip also ?

Thank you

Thanks...

hi dear plz how i can get an external ip of nearby wifi ?

My friend! You answered a question that's been torturing me for weeks! There's a hidden device in my house that's spoofing my network and redirecting the traffic to dangerous unsecured ports. I tried to analyze the packets but I got dizzy after few lines! LOL Please help!

Thanks a lot

Thanks for the laugh!

I tested 100% working

Hey great video, I have a question,if a device is static to an ip of 225.1.0.0 and the pc will only allow me to set its ipv4 to 223. Or lower, so I can't be on the same Lan as the device. How do I get to the device to change the ip? BTW there's no physical button on the device to factory reset it :(

what do u do if the camera has no gateway assigned, just a static ip?

Is the ethernet cable you used a crossover cable or regular?

Am I right in assuming you used a crossover cable for direct PC connection?

please help . I checked my gmail security gmail send message suspicious sign in attent prevented Google. what my gmail hecked or someone try to hecking.

Thx

how to find other ip address in default gateway in lan

How do I find an I'm who is using it

if we have given subnet mask too

please help me settup my camera,,, i have a wireshark but cant settup my ip address,,, please help via team viewer

Hi i still don't understand if poe ip camera, how should i i find it? Should i using poe switch?

"dirty and packety"

3 of my cameras are dark at night what is my problem

I have sumaunge 55 inc my tv dont work net

My router keeps showing a random unknown “reserved” IP address that I didn’t make. (I delete it when I see it) Could it be a hacker? Or is it a device that’s automatically making it?

arp /a from command line

Mr.Bean 😂🤣😂

Eyval dada! موردم از خنده