How to Replace a Rear Window Regulator on a BMW 325 E46

Рет қаралды 52,476

8 жыл бұрын

Brian Eslick from How to Automotive takes you step-by-step through the process of replacing a rear window regulator on a BMW E46. All done with hand tools. Estimated repair time 1.00 hour. Overall a very easy job for a DIY project.
Affiliate link mentioned in the video for
BMW E46 Window Regulator RIGHT REAR 320i 323i 325i 325xi 328i 330i 330xi NEW amzn.to/2nrh7OO
Website
For more videos, tips, and to purchase recommended tools and products visit my website at: www.howtoautomotive.com/
Stay connected at:
Email: howtoautomotive@gmail.com
Facebook: How-to-Autom...
Google+: plus.google.com/+HowtoAutomot...
LinkedIn: / brian-eslick-819839118
Disclaimer
Owing to factors beyond the control of How to Automotive/Brian Eslick, it cannot guarantee against unauthorized modification of this information, or improper use of this information. How to Automotive/Brian Eslick assumes no liability for property damage or injury incurred as a result of any information contained in this video. How to Automotive/Brian Eslick recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of How to Automotive/Brian Eslick, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not How to Automotive/Brain Eslick. #howtoautomotive

Пікірлер: 36

@Blueknight-il9nc 5 жыл бұрын

I bought a 2002 325 xi for my daughter as a commuter car. I’m pretty much got the car for nothing but from the get go I had all kinds of issues. I was able to get most of the work done by a friend of mine who is a mechanic. After all the work was done I noticed that the left rear window regulator was shot. I search the Internet and came upon your video I followed your steps and was able to replace The regulator with no problems. Thank you for putting up with these Videos to help now there’s people like me to save a little bit of pocket change. Thank you

@bmore4102 5 жыл бұрын

Pocket change? Shit they quoted me $130 to replace my rear window regulator i said hell with that and found this video and did it my self!

@DamianSheesh 5 жыл бұрын

Doing this tomorrow! Looks super straightforward, but knowing where all those little bolts are is gonna help a ton! Thanks a lot.

@HowtoAutomotive 5 жыл бұрын

Damian Scisci this repair is not to bad. Good luck and thank you for watching!

@colinmoore68 4 жыл бұрын

Thanks Brian - great help. Help Note to all: When I removed the 8mm nut securing the window bracket to the regulator, the retaining nut fell out. I did not notice at first so be aware there is one.

@alhuk5645 7 жыл бұрын

Thanks very much, very useful and avoided unnecessary damage

@HowtoAutomotive 7 жыл бұрын

Chevy Driver it's no Chevy👍🏻 glad to help!

@bmore4102 5 жыл бұрын

Thank you so much i was tryna figure out how to remove that clip that the window sits on that holds it in place to go up and down i was stumped...lmao guess i just wasent paying enough attention! Thanks again man

@Nirotceh1 4 жыл бұрын

Nice! Just what I need to do with my E46 on that same side window. Thanks!👍🏻

@enriquecurameng4119 4 жыл бұрын

Very good and informational and thank you very much.

@HowtoAutomotive 4 жыл бұрын

Enrique Curameng thank you for watching!

@charliekuhn1544 3 жыл бұрын

You don't need to take off the 8mm screw from the window in order to take the window off the regulator. Just loosen it and press the plastic clip the screw goes into when moving the window off the regulator mount. Also you don't need to remove the rubber trim at the top of the door as the author recommended to remove the window regulator. You will save yourself some time by keeping the screw loose but in place...

@sakeenaahsan8709 4 жыл бұрын

Thanks for posting, very well explained. Just a comment - If your window is jammed you can also cut the cable with a snip, once you do this you can push it up and access the bolt for removing the bad regulator.

@elypie1965 4 жыл бұрын

Brilliant, thank you. very good video.

@stage3laps 6 жыл бұрын

Really helpful. Thankyou.

@HowtoAutomotive 6 жыл бұрын

stage3laps glad the video helped. Thank you for watching!

@cosmicdustparticle7481 7 жыл бұрын

Thanks buddy!!

@HowtoAutomotive 7 жыл бұрын

Cosmic Dustparticle thank you for watching!

@itselmer 6 жыл бұрын

do you need to unplug the battery while you do this repair? and is there an airbag you have to remove as well?

@air862002 6 жыл бұрын

Excelent video with clear instructions. Thank you !

@HowtoAutomotive 6 жыл бұрын

Ion-Radu Ana thank you for watching!

@leot5898 5 жыл бұрын

Hi there, thanks for the video, but do you need to unplug the batterry before starting unplugin electical wiring? cheers

@flippy9133 5 жыл бұрын

not worth imo if you careful

@skiboss2296 5 жыл бұрын

Thanks for the help! Much more helpful then the 1 hr on that I saw! (They took the Window out and cut the moisture membrane with a razor)

@HowtoAutomotive 5 жыл бұрын

Glad the video was helpful. Thank you for watching!

@HipHopBeatSource 4 жыл бұрын

Thank you so much for this.

@HowtoAutomotive 4 жыл бұрын

Thank you for watching!

@chuckchung1445 6 жыл бұрын

Stay away from BMWs. I replaced all 4 window regulators. I had to become a mechanic because my BMW 325xi broke so much. If I had to pay a mechanic to fix all the problems, it would have cost over $15,000. As it stands, I have paid over $2500 in parts and $250 for special tools to fix this piece of garbage. Window regulators ( $1200-$1500 if you let a mechanic do it) Vanos, oil separator, coolant expansion tank, themostat, water pump, valve cover gasket, control arms, starter, fuel pump, DISA, Axle, etc. etc. etc. , etc, etc, etc. etc. etc. etc.

@matthewsummers1697 6 жыл бұрын

Chuck Chung you almost have a new car now! Lol! I've done a few of those items as well. Did the driver side regulator two years ago and now the passenger side needs done as of today on my 330i. I also have a 330ci. Love these cars and love the driving experience. All in all its the easiest car I ever owned to work on. It came be a pain but for the most part mine has been pretty reliable. The worst job I ever did on it was the oil separator. Looked it up online and most people stated it was like a 9 out of 10 for difficulty. Most said the would rather do a clutch job. If possible I would have given that job an 11 out of 10 on difficulty. I thought I was going to kill somebody! Lol!

@chuckchung1445 6 жыл бұрын

The hardest for me was the starter.

@chuckchung1445 6 жыл бұрын

You have to be nuts to waste time and money. Get a Japanese car.

@matthewsummers1697 6 жыл бұрын

Chuck Chung owned many....loved them too. 1979 HONDA CVCC, 1981 Honda Accord Hatch, 1990 Civic Hatch, 1981 Accord Hatch, 1980 Prelude, 1990 Acura Integra, 2001 Isuzu Rodeo, 1994 Accord Coupe, 1990 Subaru Legacy. I worked at a Honda garage for 9 years. From age 14-22. Loved every day!