Is rx580 run with this pc?

As far as i know you cannot easily change the power source

Tal vez sí, con un adaptador de corriente de placa base ATX de 24 pines a 6 pines para HP.

It seems possible indeed, with a 24 pin to 6 pin adapter. I need more research on this topic though. Budget wise going for a 75w GPU may make more sense

@@christopherzaf5768in inglis: I put an 8gb rx 580 and a 550w power supply so far I have not had any complications and my budget has been less than 300 euros and I have bought everything from amazon spain, to be able to put the power supply I have used a adapter that passes the 24 pins to 6 en español: le puse una rx 580 de 8gb y una fuente de alimentacion de 550w hasta el momento no eh tenido ninguna complicacion y mi presupuesto ha sido de menos de 300 euros y eh comprado todo desde amazon españa, para poder poner la fuente de amimentacion eh usada un adaptador que pasa los 24 pines a 6

Hi! Since you mentioned you have experience with upgrading HP Compaq Elite 8300 SFF, maybe you can share some knowledge? The thing is that I need to upgrade CPU from i5 3470 to i7 3700. Initial configuration has 2 RAM sticks (M378B5173QH0-CK0, Samsung DDR3 1600Mhz 4GB) which perfectly works with i5. After switching to i7 it does not boot (5 short beeps indicating RAM issue). If I leave only 1 RAM stick, the system boots. I mean either stick number 1, or stick number 1 - if there is 1 slot occupied, the system boots. If more then 1 slot, then is does not boot. I tried different combinations - it appears that 1 stick is OK in any slot (all 4 were checked), but 2 sticks don't work no matter if in A-slots, B-slots or A+B slots. To exclude possible socket damage while switching CPUs I switched back to i5 - it still works with 2 RAM sticks. Tried updating BIOS to the latest version (02.90 => 03.08), but no luck. Unfortunately I don't have neither any spare 1155 MoBo, nor other DDR3 sticks to test. Have you ever encountered something like this? I would have assumed some CPU deffect, but there is a guy on HP forum claiming he has tried 4 different 3770 CPUs with no luck (but he does not specify if he has multiple RAM sticks, unfortunatelly, though I suspect he does have). Would be very grateful if you share some thoughts on this.

@@andrewerohin2459 Hi Andrew, unfortunately I do not have a mentioned CPU to try. I have read your post in HP forum, it would not be likely that all cpus are defective. More likely would be an incompatibility with the mainboard. However, I do know I7 is working in 8300 Tower, with all 4 dim slots populated, but that has another mainboard. So I conclude the cpu is not compatible with the sff mainboard.

I didnt try windows xp, sorry.

Sata to 6 pin or 8 pin depends on the GPU.

no, just plug in the graphics card and install the drivers

Do you have the dvi cable???

When I installed my gtx 1650 i had black screen too.then I realized you have to connect a dvi cable to your monitor and the graphics

​@@smokemanicwhat were you connect the other end to ?

You need a bigger PSU, at least 450W.

Thank you for your answer, did you change the power supply because you put a 1060 6gb that consumes about the same as mine. 120W yours and mine

i would say a 1650 super or a 1650 ti, sorry for my mistakes

​@@thibautg6270did you succeed? (The 1070 with a 320 watt power supply)

​@@thibautg6270It is said that you need a dual sata to 8pin for that to work

No sorry you need another motherboard for intel gen 6

We can use only 3rd generation chip?? In this motherboard?

@@hetsolanki_13i think it is only compatible with 2nd and 3rd gen cpus.

Thanks,and what about to ad a MSI Geforce 1050 2GT LP (75W),will it be OK?

Corrupt ram or one of the ram slots is not working properly

No

It is not compatible with this hardware that i used in the video.

@@ApkHeaven What do you recommend??