Рет қаралды 63,129
Laptop powers on then off with no display is a very common issue, especially in HP laptops, I have been receiving many 840s G1, that's why I made this video to demonstrate to you how to fix it.
This issue happens mostly due to missing 1.05V chipset voltage, in worst cases it happens due to a short circuit chipset where it becomes quite hard to fix, this issue is not caused by Bios as others say.
In this video I use a digital multimeter to diagnose a faulty chipset power supply chip (TPS 51362) by comparing voltage readings from the schematics, then I proceed to diagnose a fault power sequence chip (op amp lmv393v) that is not giving out power good signals (PWR_GOOD_3). Then I replaced both fault ICs using a soldering rework station (Brower).
If you a having this issue, follow the video you will successfully be able to fix it.
How to download laptop schematics. • How to download laptop...
Download a pdf document that explains the meaning of different Schematics codes and abbreviations from the link below. drive.google.c...
If you enjoy this video, give it a thumbs up, if you have any questions put them in the comments below or write me by email, and don't forget to share and subscribe so that you can be notified when I upload more videos in the future