HP EliteDesk 800 G3 SFF - Teardown, re-assembly and upgrade

Рет қаралды 162,751

3 жыл бұрын

In this video, I'll cover the HP EliteDesk 800 G3 SFF and I'll perform a full teardown + re-assembly of the machine. Once complete, I'll do some benchmarking and gaming to test the GeForce 1050Ti that came with it.
In the video, I will first completely disassemble the machine, then re-assemble it and install a few upgrades. Once the machine is back together, I'll run some benchmarks with Geekbench and we will check how it performs in Microsoft Flight Simulator and GTA V.
You can use this video if you want to replace your CPU, RAM, SSD, video card or anything else.
My EliteDesk 800 G3 has an Intel i7 7700, a Nvidia 1050 Ti, 16 GB of DDR4 RAM and a 256GB NVMe SSD.

Пікірлер: 320

@Erfan_N_Kinslee 5 ай бұрын

This guy is so underrated and his accent just gives me comfort too

@sbrown1953 5 ай бұрын

The perfect demonstration video for the HP EliteDesk 800 G3. Thanks!

@mypfpiswhatourphonesees4294 3 жыл бұрын

amazing video, your voice is very relaxing and also i really like these oem desktops being turned into a semi gaming pc, i had a hp elitedesk 800 g1 and turned mine into a gaming pc haha.

@cIeetz Жыл бұрын

cooler master fan. So someone actually did work to that thing. Respectable build.

@Marcus_Cordeiro 3 жыл бұрын

Your channel's content is wonderful and instructive. I always put a passive heatsink on the SHPs that you don't have. Thanks for the videos

@jensdbe 3 жыл бұрын

Thanks a lot for the nice feedback :) I find the fan that I replaced to be pretty silent but passive is always better. Using a SSD makes already a huge difference versus a classic hard disk to begin with.

@Ashishcsify Жыл бұрын

you really did the great job Sir U enlight a ray of light to make people more enthusiastic realistic and practical your work really progress the future and knowledge of youth I just try to thanks that we really owe you Sir Thanks

@danton2949 Ай бұрын

Really enjoy your content.

@jensdbe Ай бұрын

Glad to hear that :)

@alexanderzubchenko8623 Ай бұрын

nicely done, man! thanks a lot!

@thejetfighter 5 ай бұрын

Nice review 😀

@stephenlister6476 Жыл бұрын

Thanks for the informative video.

@naseebphotography3961 Жыл бұрын

thank uso much sir full wach ur Video very good explane so super 🥰🥰🥰

@Jones5121 Жыл бұрын

i like how hp just took the 400 and 600 series SFF computers and just made it wider

@Itsallfun3000 8 ай бұрын

Great job thanks for sharing

@themadking8956 2 жыл бұрын

good job sir 👍

@SuperLaplander 3 ай бұрын

Good one, thank you sir!

@mattblatchley2061 Жыл бұрын

dang...that would make a nice sleeper gamer i7, SSD, 4GB 1050... I could live with that all day...

@remoquillojosemiguel1105 Жыл бұрын

Buy the rtx a2000. Makes for the ultimate sleeper

@Friddle Жыл бұрын

The one I bought didn’t have a gpu so I bought a 1650 4GB. I run csgo at ~300 fps. Although the gpu struggles with heat, under full load it likes to sit at 85C which from what I understand is throttled. I’m currently trying to increase case airflow to fix that

@Ziyoblader 8 ай бұрын

@@remoquillojosemiguel1105you might have to cut the metal housing that folds into the computer there to fit bigger gpus running into this issue with a Lenovo with the same concept of folding the cage down

@jj-icejoe6642 2 жыл бұрын

I have this one with I7-7700 32 GB ram and T600 and it's a beast !

@bayusetiawan181 2 жыл бұрын

Thanks. Now i see its true power

@cIeetz Жыл бұрын

its actually a solid pc. If I can upgrade the graphics somehow and even get half the potential of a 660 ti with barely any power draw. I can run the games I play with multiple tabs on solid graphic settings no problem.

@KimoKimochii Жыл бұрын

what’s a t600?

@toni2972 Жыл бұрын

@@cIeetz HP 800 G3 TWR I7 16 GB DDR4, 512GB SSD, GEFORCE GTX 1060 3 GB. IS this good for 577$ USD or is it to much for it ?

@alpha1k. Жыл бұрын

@@toni2972 too much might as well save a little more and get something way better

@JDMperformance 4 ай бұрын

You saved me! I was confused whether the black ram slots are channel A and the whites are B 😂

@osamabinyounus3216 Жыл бұрын

Hi... Great Video ❤ detailed assemble overview... I'm using the same machine... Can u please upload a short video on CMOS battery replacement... Because in this machine the way is different from Rest 😔

@sau002 8 ай бұрын

Very useful. Thank you.

@jensdbe 8 ай бұрын

Glad it was helpful!

@MightyKnight_F6 2 ай бұрын

Now I am confident that I can go for an RX 6400 for this PC since it only draws 55w compared to 75w in 1050. Thanks for the video bud ❤

@djtriode 2 жыл бұрын

Thank you

@selokakamel8351 2 жыл бұрын

thank you very much

@enado18 Жыл бұрын

Thanks!

@fthqds2400 3 жыл бұрын

Hello... What a great video! It's very instructive. But, i'm wondering, would it possible to replace the stock heatsink with either Cryorig C7 or Noctua L9i? Both have a backplate that must be installed on the back side of the motherboard..

@jensdbe 3 жыл бұрын

I think that the only option for such heatsink would be to remove or to bend down the lifted mounts on the bottom of the case. As you can see at kzfaq.info/get/bejne/pJd1h8Rk0rCcZX0.html These would prevent you from mounting that backplate or the board would end up too high. Keep in mind as well that the case is limited in height so you might want to check if your heatsink+fan would fit in the limited space.

@Michael-os8nn Жыл бұрын

Will this graphic card work with a 180W? The nvidia's website says 300w as recommended.

@phantom48v Жыл бұрын

hey man great video! how many hard drives can you fit on this device ?

@jensdbe Жыл бұрын

If I remember correct, it fits 2x 3,5" drives, 1x 2,5" and off course the NVMe drive.

@N3V3rmor365 2 жыл бұрын

Where do i get mounting screws to add an SSD to this PC? Thanks.

@jayparker3660 Жыл бұрын

Hello, thank you for your content. Is the stock PSU enough fir the 1050TI and additional HDD?

@jensdbe Жыл бұрын

That should be enough, yes.

@hl2run 3 жыл бұрын

Thank you for the video. Do you think there is a space to put 4 3.5" HDDs? I don't have a separate GPU in the case. Thanks

@jensdbe 3 жыл бұрын

Two times 3,5" would be the absolute maximum. There is no other space to leave them and, since the DVD-drive is a slim model, even removing that won't help you I'm afraid.

@peterlim1587 Жыл бұрын

hi, great video! Currenly i have hp g6 800 sff and do you have a video for this model to change to another master cooler casing ?

@jensdbe Жыл бұрын

No video on that but I'd be surprised if it can be done. It's typically a custom motherboard form factor that doesn't fit in a standard case format.

@earlynakn6642 2 жыл бұрын

Hello friend, i have this machine but it's the Tower version. My question is, can i change the CPU cooler into a Tower cpu cooler (ID Cooling SE 902)? Thankyou

@PauldenBoef Жыл бұрын

Good video. Where do you get the standoff screws for the HDD?

@jensdbe Жыл бұрын

Not sure where to buy them. I still had some laying around from dismantling another HP machine I think.

@35447 Жыл бұрын

I'm trying to get a new graphics card for this computer, but basically every single 1050 I find has the DVI port in a different spot. Is that a problem? Will a graphics card with the DVI port in a different area still work on this computer?

@jensdbe Жыл бұрын

That shouldn't be an issue at all. Doesn't really matter as long as tou have a low profile card.

@bineflextv5438 Жыл бұрын

Hello, does it have connection/pin for extra external fan? And strip led, Where can i connect it?

@mikegord Жыл бұрын

Purchaed one of these PC recently for AUD $160. Assembled in March 2018. 'A' grade condition. 7th gen i5 cpu. 20 second boot on the supplied 1Tb HybridHD. 8-9 seconsd boot on a SSD. Installed Windows 11. Needs a graphics card to play games.

@jensdbe Жыл бұрын

That sounds like a really good deal. Adding a proper GPU (GTX 1650 looks like a good match) will give you a lot more fun.

@Ghostdesuu 2 күн бұрын

What kind of screws did you use for standoffs? I'm planning on building a server in this machine, but the information on that appears frustratingly scarce.

@williamsr06 Жыл бұрын

Just ordered a refurbished one off of Amazon today to host my own Minecraft server! The only difference with mine is that it has a 6th Gen Intel Core i5 and a 128GB NVMe SSD.

@Monkey45983 9 ай бұрын

Add more storage, a gpu and if possible (Ik it’s difficult) upgrade psu so that you can have potential for different graphics cards. Also should probably give it some fresh thermal paste and make sure everything is plugged in and seated correctly

@edobiotec 9 ай бұрын

Thank you very much. Just for reference, I installed an ASUS GEFORCE GTX 1650 4GB low profile, double fan. The twist is: I had to cut a piece of the chassis where hard drive are located (a 4cmx4cm square) because the card is too long. I also installed an internal ssd (samsung 990 pro) and 32gb corsair RAM. Looking to upgrade it from i5 to i7 7700, just wondering if it can handle a 7700k. But it's worth the job

@diegosc985 5 ай бұрын

Is this on the stock motherboard. I'm thinking of getting an Asus Z170 so I can overclock. Unless you know another way.

@faymototv3450 2 жыл бұрын

c bon pour montage video

@gauravawadhwal5988 2 жыл бұрын

Thanks for the video! Do you think its possible to keep 2x 3.5" HDDs inside the box? Considering it as a NAS

@jensdbe 2 жыл бұрын

Two drivers should fit next to each other.

@overratedprogrammer 11 ай бұрын

Did you ever go through with this? i want to do the same

@gauravawadhwal5988 11 ай бұрын

@@overratedprogrammer I did not, sorry.

@SAkash-hj1jl 2 жыл бұрын

Can you use this EliteDesk model to run VMs, and do out-of-band management? What upgrades do I need to make for these to work? Or which micro server is ideal for these capabilities?

@jensdbe 2 жыл бұрын

The specs allow it to run a bunch of VMs, depending a bit on your needs and how resource-hungry they will be. Out-of-band management is not so easy. You could install a second network card but if the host-OS is down, you would still not be able to reach it. The approach I have for a regular PC which I used as a NAS is to have it connected to a smartplug (which I can remotely enable/disable) and set the BIOS to always boot after power loss. Thay way, in case the machine is locked up, I can at least remotely reboot it :)

@SAkash-hj1jl 2 жыл бұрын

@@jensdbe Thank you for the response !

@juliomatos33 7 ай бұрын

Is that possible to upgrade to i7 8th or 9th generation? I have one, i5 6th gen, 8gb and 120gb ssd. Planning future upgrades… Thank you for ur answer.

@huwfulcher 2 жыл бұрын

Just bought one and looking forward to tinkering with it. Does the case support putting in 2.5” SSD drives?

@jensdbe 2 жыл бұрын

There is a space left from the 3,5" drive bay. You do need the "special" screws to go in the SSD as it is held into place with those. Enjoy playing around with it.

@huwfulcher 2 жыл бұрын

@@jensdbe Great, thanks for the help!

@carlosraulmartinezfigueroa1503 Жыл бұрын

Hi, how many watts is that power supply? I have an hp prodesk 600 g3 sff and I have thought about buying the same graphics card that you are using, but my power supply is 180w platinum. so I don't know if it really works for me at least in the medium term without burning the power supply or the graphics card

@jensdbe Жыл бұрын

The power supply in mine is/was also 180W. This should be sufficient for the CPU and 1050Ti.

@flacodoom Жыл бұрын

Any ideas how to install a frontal cooler fan to intract air? Temperatures 90°C while gaming is the only issue of this HP g3 prodesk design

@jensdbe Жыл бұрын

I don't really see how a fan could fit in the front. I guess for proper gaming this case is just not big enough.

@_Zepp_ 6 ай бұрын

What in the world are the screws your using for the hdd? I've tried searching for hdd mounting screws and ordered two different sets but the heads are too small to slide in the bracket.

@SpikeCooks Күн бұрын

did you find out?

@mokhesengramaisa8202 4 ай бұрын

when you up grade processor can you please use i9 1151 socket? i am asking you because I am not sure

@rhys8468 3 жыл бұрын

hey nice video, btw im gonna ask can the psu handle regular 1050? also can i use to bit more powerfull GPU such as 1070?

@jensdbe 3 жыл бұрын

The EliteDesk 800 G3 has only a 180W power supply. The most consuming graphical card it comes with from the factory is a GT730, which takes around 40W. A 1050 Ti takes around 75W so that should be within the safety margin. A 1070 on the other hand easily does the double (~150W) so that's really too much for that PSU. You would also miss the 6/8 pin connector that such GPU needs. Upgrading the PSU won't be an easy task as well I'm afraid.

@rhys8468 3 жыл бұрын

@@jensdbe thanks mate

@interpolfallen4159 3 жыл бұрын

I have a 800 g3 running a Gigabyte NVIDIA GeForce GTX 1650 4GB GDDR6 Graphics Card. So far so good. I use obs to live stream with a mic,4kcam link from elgato and a hd60s+ as well. So far no issues. Only upgraded the memory with the gpu

@rhys8468 3 жыл бұрын

@@interpolfallen4159 so basically as the GPU must be under 75w heh thanks bro

@interpolfallen4159 3 жыл бұрын

And I just changed the hd60s+ for a 4k60pro with low profile bracket through pcie. It fits perfect and no issues.

@Username-qx9gk 11 ай бұрын

Any idea what idle power draw is like?

@ruimoura Ай бұрын

HI, i'm thinking in one of this machines to a home NAS with Unraid, i would use the NVME drive and two 3,5 HD to storage, is it possible to have two 3,5 Hard Drives on this thing? Thank you

@wing-views 2 ай бұрын

I've read in their docs that the PCI express slot is limited to 35w. Can it handle that GPU?

@JeanFrancoisDesrosiers 3 жыл бұрын

Would that be possible to put 2 3.5in hdd in this machine? There are 3 sata ports... would power be sufficient?

@jensdbe 3 жыл бұрын

A typical HD uses around 10W so I don't think that would be an issue. If my machine works fine with that 1050Ti, those hard disks should definitely work :)

@Toysourboy 7 ай бұрын

I was so confused how you got thr cover on so easily but then I realized the tab was just bent and thats why I couldn't get the cover on lol

@josephsawatsky Жыл бұрын

So I wonder I'm looking at a 6th generation i5 version and I wonder if it has a nvme slot on the motherboard

@f.ruiz-tagle Жыл бұрын

k tal corre Nvidia 1050 Ti, solo entra la que tiene un ventilador ?

@cIeetz Жыл бұрын

does this have an upgraded PSU? I heard the 1050 Ti has too much power and the most it could take is a 1030 LP . I also seen a 1030 LP video where buddies computer wouldnt run it. If it runs a 1050 ti I'd probably put one in it.

@jensdbe Жыл бұрын

This was the standard power supply as far as I know. It is 180W and a 1050Ti would require around 75W. This leaves enough for the rest of the components.

@markoparmenac 2 жыл бұрын

Hi, thank you for this video, one small question, can I add one more ssd nvme, to get two ssd?

@jensdbe 2 жыл бұрын

There is only a single slot on the motherboard that works for storage. Another option, if you want NVMe is to add a PCIe card with NVMe slot. Or if you have enough with the performance of a SATA SSD, you can also add one of those.

@markoparmenac 2 жыл бұрын

@@jensdbe Thank you for your prompt response

@trashman1805 11 ай бұрын

I have a question about powersupply, is there a 300w or more powersupply that is compatible with this computer ?

@shanwang-ti5cm 4 ай бұрын

TWR is 500W

@rachidinho7 3 жыл бұрын

How many watts in boite alimentation Is it enough for that compilation

@lucasfads 19 күн бұрын

What's the name of the screws used for the HDD at 11:25?

@virginpotato3406 Жыл бұрын

Is the cpu cooler upgrade?

@omerback007 9 ай бұрын

Bet you've already answered this somewhere but here is where i am in a pickle. I have a G3 800 SFF currently running without a GPU. I checked the specs on the GTX1650 LP and on a stock system that doesn't go with the specs. First, the PCIe slot is limited to only 35W supply to the graphics card while the GTX 1650 pulls a whopping 75W at max draw. Second - Now somehow even if you end up installing and getting it to work and definitely not at full potential of the GPU, youre still gonna need to upgrade your power supply so it can handle the load of the GPU at even 75% of the full power. And i am talking about the SFF in the video. Same problem with the 1050ti. The only cards that go in safe limits are the GT1030 and the GT 730 unless you get another PSU which supports higher Wattage output (you might need to swap out the case too) and then run a full sized card instead which draws power directly from the PSU instead of relying on the power from the PCIe slot.

@jensdbe 9 ай бұрын

Upgrading the power supply will not increase the power that the PCIe slot can deliver. Also for cards that do have an external power connector, they count on drawing up to 75W from the PCIe card as far as I know. I do see that it is documented to have a maximum of 35W supported for the PCIe slot but as this one was doing fine with the 1050Ti, I would expect a 1650 to work fine as well. Wouldn't be the first time that I try this with success. 180W in total should be fine for GPU, CPU and the rest of the components like mobo/RAM and SSD.

@omerback007 9 ай бұрын

@@jensdbe I really want to try the 1050ti or the 1650 on it like you installed but its too much of a risk interms of me buying and it not working at a later point in time.. better be safe side and run a 1030.. I have always been unlucky in that regards so I better go with something thats tested and proven Thank you for the reply!

@OPMayo_VR 26 күн бұрын

@@omerback007 any Low profile GPU will work as long as it fits, someone tried an rtx 3050 low profile and it worked perfectly fine, it's really only the temps you kind of have to worry about. 180 Watts is fine, no risk really, but you do you I guess 👍

@kassheez 2 ай бұрын

Hellow bro Is it possible to replace the power supply with a genereic one ? And put 4 pieces or 8gb ram

@randbasic Жыл бұрын

I’m interested in adding an extra SSD drive or two. The connector with multiple plugs doesn’t have SATA connectors. Do I need to buy an adaptor? To connect an extra SATA SSD? Thank you for the video!

@jensdbe Жыл бұрын

To each drive you will need power and data. Power comes from the black connector on the motherboard (with red/yellow/black wires), data needs to be connected to the blue SATA ports on the motherboard. If you don't have enough power connectors, you can easily split that. For additional SATA ports, you can install an extra controller in one of the PCIe slots.

@randbasic Жыл бұрын

@@jensdbe Thank you for the info. I have a G2 elitedesk and that one has SATA connectors. So I was just confused when I saw the pigtail with 3 non-Sata type connectors. Thanks again! I guess I also need to find some brackets to hold the drives into the housing slots. The PC I bought just has the windows boot disk on M.2. I’m really impressed it is very fast.

@35447 Жыл бұрын

I have this same system with a GTX 1050, and it is running very loudly and the computer turns off with a small shake from my table. Is there anything I can do to make my computer quieter and more stable?

@jensdbe Жыл бұрын

I'd check the fans, maybe replace them with a silent version. After time, some of these tend to become pretty loud, as was the case with me as well. Also removing dust and replacing the thermal past could help.

@dniiall 6 ай бұрын

if i change to news pc case,which motherbpard should i buy?

@razakmajid7006 Жыл бұрын

Can I upgrade my HP 800 g3 sff i5-6500..exact like u done on g3 i7? Tq bro..very inspiring video..👍👍

@jensdbe Жыл бұрын

Should be possible, yes. As far as I read, you can even upgrade to an i7-7700 at max.

@ZetBahr 10 ай бұрын

in your EliteDesk 800 G3 SFF its M2 SSD or M2 NVME? thanks for the video

@jensdbe 10 ай бұрын

Its an NVMe drive

@ZetBahr 10 ай бұрын

thanks@@jensdbe

@Mash_00805 Жыл бұрын

This board can it handle 32gb of ram if you add 2 8gb ….to the 2 8gb existing to make it 32gb

@tkoragen3527 Жыл бұрын

Hello, need to ask about PSU! Is it 250W? I have G3 600 with i5 7500, 16GB DDR4, SSD 256MB+1TB SSD Samsung an di want GTX 1050Ti put inside. Is generic PSU 250W enough? Thanks in advance

@jensdbe Жыл бұрын

In my version, the PSU was 180W only. A 1050 Ti would consume around 75W so should be doable with the rest of the components. Looks pretty much the same as I had in mine so I don't expect any problems for you with a 1050Ti.

@chickenrun3983 2 жыл бұрын

Hello, can you please say a specific model of your graphic cards on this video? thank you so much

@chickenrun3983 2 жыл бұрын

I found it: GIGABYTE GeForce GTX 1050 Ti OC Low Profile 4GB thank you

@mejaymusic 4 ай бұрын

New subscriber looking for advice.. The PC spec in question details are: HP Elitedesk 800 G3 Small Form Factor PC. Intel Core i7-7700 processor. 16GB DDR4 2133MHz RAM. 500GB x2=1tb SSD Windows 11 Samsung 860 EVO NAND-SSD. Optical disc drive. Built in 1Gbps ethernet port. No wireless card but Wi-Fi dongle. Integrated graphics There are 2 free RAM slots and the motherboard supports 64GB RAM My question is would upgrading the RAM make it better eg.. 32 RAM 3200 mhz with like a crucial 32gb secondhand?? And also Would putting in a dedicated graphics card like a Msi gt 1030 secondhand help it too?? Trying to understand how it can be improved, I don’t know if it would cope with music software like ableton and gaming well or not, please could you help me understand if these ideas to make it better would be a good idea or not? If it would work? And if it would be capable for these things? Sorry if I didn’t word it well I just tried to give as much info as I could. I absolutely loved watching this video and will continue to watch videos here thank you for posting and look forward to your reply 🙂👍🏻

@minervali9436 2 жыл бұрын

Nice video! I m thinking to upgrade my i7-7700 but dont find any path. Any idea?

@jensdbe 2 жыл бұрын

i7 7700 should work fine as it originally also came with this CPU

@minervali9436 2 жыл бұрын

jensd_be any better CPU can be used on the motherboard?

@jensdbe 2 жыл бұрын

@@minervali9436 i7-7700 is the highest it came with from the factory/HP. Better might work but needs to be tested in order to find out.

@christianviewmont5632 2 жыл бұрын

Here is my ultimate HP EliteDesk 800 G3 SFF Upgrade project: h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Upgrading-HP-EliteDesk-800-G3-SFF/td-p/8251218 Specifications: fitted with an Intel i7-7700K, 32GB (4 x 8 GB) of Samsung M378A1K43CB2-CRC (PC4-19200 running at 2400 MHz) RAM, primary (boot) drive: SAMSUNG 980 PRO SSD 2TB PCIe NVMe Gen 4 Gaming M.2 SSD, secondary drive: Samsung 870 QVO 1TB (SATA SSD), tertiary drive: Seagate BarraCuda 2TB Internal Hard Drive HDD - 3.5 Inch SATA 6Gb/s 7200 RPM 256MB Cache, RTX 3080 OC Edition Graphics Card (PCIe 4.0, 12GB GDDR6X, LHR), secondary power supply unit synced to power the GPU: AresGame AGK850 850W Fully Modular 80Plus Gold Certified PSU. So far [June 5th, 2022], the fastest of its kind as per UserBenchMark: www.userbenchmark.com/UserRun/52135692 The sky is the limit folks. Just think outside the box -literally so!

@abdelhakeemahmed4988 5 ай бұрын

New subscriber Bro i got the mini tower ver with 250 w psu What card should i use or should i change the psu

@jensdbe 5 ай бұрын

A GTX1650 low profile would probably be the best choice here.

@abdelhakeemahmed4988 5 ай бұрын

@@jensdbe the normal ver won't work ?

@jensdbe 5 ай бұрын

@@abdelhakeemahmed4988 a regular card does not physically fit in the SFF case as it would be too high

@abdelhakeemahmed4988 5 ай бұрын

@@jensdbe i have the mini tower version not sff And thanks alot for your time

@lemonjuice147 Жыл бұрын

Hey man great video, planning on using this as a base of a raid server with parts from other old cheap computers Would you reckon with some sata power splitters, sata data splitters, another 2.5/3.5 drive cage, I could chuck 4x 2.5 ssd's in the front? Plus use a raid pcie card with m.2 cards? Also with it being an LGA1151 socket and the i7-8700 from another PC i plan to scrap parts from, would the i7-8700 work in this with a bios update?

@jensdbe Жыл бұрын

Make sure the power supply can support all the disks which you want to put in there. For the CPU, I don't think 8th generation is supported. You can find the supported CPUs over here (page 10): www8.hp.com/h20195/V2/GetPDF.aspx/c05378305

@craigaonifall 2 жыл бұрын

love the video but one thing i can not find is a way to boost clock the cpu i have a similar system the 705 G5 with a ryzen pro 5 3400G says it can boost clock to 4.2hz but shows no way to do and the bios doesn't have the option

@jensdbe 2 жыл бұрын

This is just part of the CPU architecture, not really something that needs to be explicitly enabled. You can check the current CPU speed in Task Manager for example. Try and run something heavy and check the variation clock speed to verify.

@craigaonifall 2 жыл бұрын

@@jensdbe Thanks just learning this system making it into a emulation pc

@dounsdounzi9126 2 жыл бұрын

hi i got a hp pro desk 600 g3 but i don't know if it's compatible with 8th gen cpu ? What do you thin ? thank you

@christianviewmont5632 2 жыл бұрын

The fastest CPU that is compatible as per your Q270 chipset with your HP ProDesk 600 G3 Small Form Factor is the 7th gen Intel i7-7700 -maybe the i7-7700K.

@mikecrozoft Жыл бұрын

que tipo de memoria ram instalaste? Cualquier ddr4 a 2400mhz serviria? saludos

@romariogamingchannel Жыл бұрын

Tengo 2x8 DDR4 3000 MHz. Trabajan rapido!

@d.s.5157 2 жыл бұрын

Hi do you know how I can install 2.5 drive in the 3.5 area? Any links you have would be appreciated !

@jensdbe 2 жыл бұрын

I guess the easiest would be to get a bracket that allows you to put your 2,5" drive. Some of them exactly match the size of a 3,5" drive. I used one of these to upgrade my Mac Pro 4,1: kzfaq.info/get/bejne/jNiSocmKzM2tmZ8.html

@GiorgioTamburini 3 жыл бұрын

Dear friend, I have this same machine and I am thinking of incorporating a low profile geforce 750ti gpu, I would like to know how your PC has responded to the stress of use and if you think that mine will support the card that I want to put. Thank you. Best regards.

@jensdbe 3 жыл бұрын

The 750ti requires a similar amount of power as the 1050 ti so you should be good.

@GiorgioTamburini 3 жыл бұрын

@@jensdbe Thank you very much for your answer, I will try. Keep up with your videos they are very good. Best regards.

@napr4685 Жыл бұрын

@@jensdbe what about a rx 6400 lp?

@johnh6689 2 жыл бұрын

Is there a way to add an external power button? I dont see any jumpers.

@jensdbe 2 жыл бұрын

The power button is integrated on the motherboard. No wire with a separate button in this case.

@panchooceano7717 3 жыл бұрын

oh so it's safe to put the monitor on top of the case, i was worried but i see it works fine

@jensdbe 3 жыл бұрын

It's definitely intended for being put horizontally (no stands on the sides) and it feels sturdy/strong enough to handle a proper weight. A classic CRT might not be the best idea but even a decent sized LCD should be fine to my idea.

@silviuignat8810 11 ай бұрын

Please tell me the name of the program in the right corner to see the temperatures. Thank you

@jensdbe 11 ай бұрын

I'm using Rivatuner Statistics Server (RTSS) for that

@ramirezjohnmichaelt.4633 Жыл бұрын

Hello,,as you mentioned, it will not be easy to replace its psu,, can you do a video on how can we change the power supply with a standard one, without changing the motherboard?

@jensdbe Жыл бұрын

In the standard case, you need a specific HP PSU as a standard form factor does not physically fit. In another case, it should work to use another PSU but you would need a convertor from the standard ATX to the HP-proprietary connector. All in all, if you plan these kind of things, it might be more interesting to sell the whole PC and buy another in the tower version (or a custom PC)

@ramirezjohnmichaelt.4633 11 ай бұрын

@@jensdbe your response is highly appreciated

@Hamad-re9vr Жыл бұрын

Is it comes with factory m.2 ssd ? If not what kind of ssd please ? Thank you

@jensdbe Жыл бұрын

The model I had, had an M.2 by default

@jfdeschryver1535 2 жыл бұрын

Bonjour je voulais savoir si l'alimentation de 180w suffit avec la carte graphique ? merci

@jensdbe 2 жыл бұрын

The most consuming graphical card it comes with from the factory is a GT730, which takes around 40W. A 1050 Ti takes around 75W so that should be within the safety margin.

@archynovaide6530 2 жыл бұрын

Hi, i've got a 800 G3 Tower with i5-7500 and 8Gigs of RAM. Im planning on upgrading it into i7-9700 with GTX 1650, Jonsbo CR-1400 Cpu tower and a 500watt psu. Is there any possible way to change the psu with a 500watt and different model?

@jensdbe 2 жыл бұрын

Afaik, the motherboard does not support an i7 9700 and replacing the PSU won't work either as it is a custom made one with proprietary connectors and size.

@archynovaide6530 2 жыл бұрын

@@jensdbe Ok. So, as you said that i7 9700 won't support in this motherboard so i think i should change a mind to replace current i5-7500 with i7-7700. And, which connector is different between HP Original PSU and a conventional PSU (Ex:Corsair)?

@bbq9214 2 жыл бұрын

hello there i have a question i have the exact model but I have a intel core i5 7500 8 gig ram memory ( I don't exactly know the watt/power) and I was asking is it possible to upgrade this machine with a GPU like a 1060? and motherboard is specified as 8299 by hp so yea I am hoping for a reply as I want to upgrade this machine

@jensdbe 2 жыл бұрын

As far as I know, a 1060 needs at least one additional power plug. You might be able to supply enough with a convertor from regular moles to 6-pin. A 1050 Ti, like I had in it, doesn't require this.

@bbq9214 2 жыл бұрын

@@jensdbe what about the 1050 ti I know you used it In your video but do you have the exact model as when I search it up I get models that seem weird to big so yea thank you and so if I add in a 1050 ti I will be fine not need to change the power to support it right?

@nelsonr.9450 9 ай бұрын

I know im late for this video 😅 I have a plan of removing everything inside, and make it like a console wannabe pc, with better parts, like mobo, psu, gpu... Do you think it's possible? I'm really about to go get it... 😅 Edit: Also 3D print a different back plate/shield so a new mobo and psu could be installed, but still connect the usbs and the rest from the front!

@GuitArts25 Жыл бұрын

Hello, very good video. A few weeks ago I got this same equipment, I am happy with it, it is fast and fluid. I bought it with an i5 6600, 16Gb RAM. I have been seeing some comments about which GPU would be ideal with this equipment, but my concern is that the maximum consumption that the PCIE x16 port allows is 35 watts. Now, according to your criteria, which GPU would be the ideal? Taking into account that the PSU is an 80 Plus Platinum 180 watts. Some GPUs have been recommended to me but they exceed the permissible limit of watts allowed by PCIE. Have a nice day.

@jensdbe Жыл бұрын

A GTX1650 low profile is what I would recommend. I had a 1050Ti in there and that worked without any issues.

@GuitArts25 Жыл бұрын

@@jensdbe Thank you very much, I appreciate the answer. No problem then. Grateful. 👍

@hectorquintero1991 Жыл бұрын

@@GuitArts25Hello, what graphics did you use having 180w?

@GuitArts25 11 ай бұрын

@@hectorquintero1991 Hello, at the moment I have not added any graphics card to the equipment. I only use the integrated one, in my case it is the Intel HD Graphics 530

@nicolasgutierrez1499- 9 ай бұрын

hola Héctor, quisiera saber si pudiste ponerle tarjeta a tu equipo?

@MrFaceonline Жыл бұрын

hello. Doest it throttle the 1050ti as the pciex 16x slot is rated at 35w?

@jensdbe Жыл бұрын

Hmm, that's interesting and indeed the spec sheet lists a maximum of 35W for the x16 slot. I didn't have any issues with power limitation as far as I could see.

@MrFaceonline Жыл бұрын

@@jensdbe in simmilar pc it was some lenovo sff with i5 4570 also with 35w limit on the pciex and it was deffinately throttling the gpu, it was low profile gtx 1050 non ti 2gb. I tested the same cpu +gpu + ram combo inside desktop pc with haswell motherboard, difference was huge atleast 30& less fps with the sff, it was easy to visually notice the throttling. After that i tried to lower the cpu power draw, disabled the turbo and thtrottled cpu to 2.5ghz speed with the multiplier, results were the same, it wasnt problem with the psu as the sff system was drawing max 100-120w under load, yet the desktor was drawing 150+ watts so there it was the measured difference 20-30 watts and propably the reason was gpu not getting enough juice. But it worked without any problems, just crippled gpu performance.

@liberahistoria1142 Жыл бұрын

do HP Elitedesk 800 G4 SFF support aftermarket ram stick like hyperX 8gb ?

@jensdbe Жыл бұрын

As long as the RAM matches the type and speed, it typically works. The days from Compaq where you really needed branded memory are fortunately gone.

@serjl4172 2 жыл бұрын

What card would you recomend for a g5?

@jensdbe 2 жыл бұрын

Depends which version you have. As far as I see, the SFF has only a 250W power supply so maybe something like a GTX 1650 low profile would work . Hard to tell as I haven't looked very much into that newer one and no hands on.

@vans610 2 жыл бұрын

Would a 1660 or 1660ti fit in there? Would a conventional PSU fit in the chasis as well?

@jensdbe 2 жыл бұрын

It's very hard to find a 1060 or 1060Ti in low profile that would fit. Also power demand would be an issue I think. A conventional PSU will not fit. the PSU and connectors on the motherboard are fully customised. If you're looking for this kind of upgrade, I guess selling the PC and getting something else as a base would be the easiest :)

@zeroturn7091 2 жыл бұрын

You’re better off buying an HTPC case that will accommodate the components. Just to give you an idea, you’ll need to map out a layout for a riser and stand-off to mount the GPU horizontally. As far as the PSU, you would need to cut out an upper or lower portion of the case to allow for dimensions which can be covered with a fabricated tray. The real problem is the dimensions again which leaves ITX as the only solution. So now if you don’t have a rear I/O knockout, you’ll need to create an access for your new shield. Finally your new board will need to be wired to the front I/O. You can buy header connectors, and trace the pin out to splice and join the two. The PSU will be the hardest, and to keep a cleaner look you’ll have to install elevated feet so that the recessed tray doesn’t ruin the aesthetics.

@missattoaurrera7348 10 ай бұрын

Great video and good PC , i need some help, my question is, what Graphic i need for play Gta V and Left 4 dead 2 as maximum in this pc? Thanks for reeding

@jensdbe 10 ай бұрын

As you are limited to low profile GPUs and limited in power provided, a GTX 1650 would be the best choice. This will result in proper performance for the games you mentioned as well.

@missattoaurrera7348 10 ай бұрын

@@jensdbe thanks so much

@missattoaurrera7348 9 ай бұрын

@@jensdbegtx 1650 75 watts ?