Just an FYI, when I made this video, there wasn’t a work-around for Intel users but here is a video where it shows how to use Intel XTU to adjust RAM speeds on non HP RAM: kzfaq.info/get/bejne/a8pgq7p_va6qnH0.html

I LOVE that you made a channel dedicated to this computer, I think is a really cool idea.

Thank you so much for all your videos on the HP Omen! Your tweaks have helped me immensely drop my idle and working temps without touching any hardware. Your videos are easy to follow for someone unfamiliar with the high-end PC world.

I searched for 1 hour how to do that ram speed on my omen, until I found your vid and then 5 mins later it worked haha

You don't even know how much I appreciate you for making this! I went through so much turmoil trying to raise the speed through bios updates (had too factory reset once) and just when I lost hope, I saw this video. Thanks a million.

Was going to build a PC but as you might expect sourcing a reasonably priced GPU was impossible so I had to go pre-built. Your videos have been really helpful in making my 25L just a bit more how I would have built mine. Excellent content. Thanks!

Thank. You. So. Freaking. Much. for all these videos dedicated to the Omen. As most viewers, I'm completely new to PC and your videos have helped me a lot. Love that they are also short and sweet, straight to the point and very informative.

I LOVE YOUUUU thanks!! I was so frustrated on this for hours trying to figure out why I couldn't change the speeds of my RAM in the bios menu and I finally found your video after hours of digging to find the right video and now I have subscribed to you!!

You are the man! I upgraded my Omen 30L from 16 gigs to 32 gigs, and this solved the problem for the slower speeds my PC was reporting. I really appreciate you, man. Your videos have helped me make my Omen a beast. You are honestly the best! Thank you so much for your time.

Thank you for being so simple man. So many guys say so many other things it’s all so confusing but this is so simple and straight forward. You’re goated.

MMMMMAAAAAAN ! just did my upgrade I'm really happy, started with the easy part now need to add the fans .

this is the most helpful video i’ve found, thank you!! Exactly what i needed and I got mine done and working. :)

Just watched an entire 30 second antidepressant ad for you, boo! Great informative video as always. ❤️😊

Thank you! I bought and installed another ram card in my Omen 30L and this brought the speed right back up to 3200 when it showed it was on 2400. I subbed.

Thanks Dan! As of April 2022, HP has updated the BIOS (version F.22) which now allows you to install after-market RAM without having to use Ryman Master and do any overrides. I bought the G-Skill Ripjaws sticks that you recommended (used your link) and it was recognized automatically. I appreciate the recommendation; you gave me the confidence to do the upgrade.

Fantastic, helpful content at a great pace with no BS. Good stuff. I look forward to checking out the rest of your stuff.

Nice video, I’ve done just that before I found your video but it’s good to see there’s a clear tutorial for this. One thing I did on top of it is to extract the XMP *timings* from Thaiphoon Burned and applied them in Ryzen Master. Cheers

It’s so nice that I have the exact same model of PC as you, everything just become much more easier

You are a life saver man, I would have been lost without this video 🙏🏼

Great video!! This was exactly what I was looking for. I searched the internet for hours, wasted my time calling HP support and tried many things including switching RAM sticks. You explained it very well and it solved my problem! looking forward to watching your other videos about overclocking. I liked and Subscribed.

Hey! Just wanted to take the time to thank you for these awesome and very informative videos! They have been extremely helpful!

I'm really tempted to get the HP Omen 30L with the RTX 3070. You're one of the few channels I see that has done so much in depth Omen content, it's really helpful.

Subbed for this great video was worried I wouldn’t be able to upgrade

Yo man, THANK YOU so much for posting this video. The care you put into looking at it from a beginner perspective instead of just spitting technical diarrhea is appreciated. I was paranoid I was going to screw something up. Very thorough and complete - subbed. Looking forward to more videos.

I really appreciate your careful instructions! This was my first time upgrading a PC without a family member's support and it went so smoothly thanks to this video. :)

Saved my first pre built, sketchy on Hp's behalf thanks

Bought the omen 30L on cyber Monday and followed your advice on cooling. I also found another video on youtube where someone suggested downloading the B450 AMD chipset. I've been getting 42-44 celsius on idle which is much better than out of the box!

I can't tell you how much of a life saver you are sir. I know more about dirt than I do PC's so I deeply appreciate you dumbing it down for me. Just subscribed and looking forward to all the new info. Thank you so much!

Thank you so much. I can't believe I found a very easy to follow guide with the same exact PC as me. Feels good man.

Great video Dan. So this dirty secret of HP really infuriated me. I almost returned the PC in the first 30 days due to this. Thankfully our discord came through for me. Now I have two more 8gb sticks of HP ram. So I have four 8gb sticks of HP ram. I have four slots but am currently only running two 8gb sticks. I will add the other two 8gb sticks when I need to. My son doesn't need more than 16gb at the moment and theyre running at 3200 mhz. I found out the CPU can be upgraded. So I think i'm going to upgrade from 10700k to 10900k. We have this amazing PC place in town, been around for years and reputation is perfect. They will swap out the CPU for a price and have a warranty on service. My son wants the 10900k and I think the 10700k is more than enough. Kids! Lol. Your channel is already up to 1,220 subs! Damn! Congratulations Dan.

Great video! This worked perfectly for me. I upgraded my system from 8 GB to 32 GB Ram for the price I would have paid HP just to upgrade to 16 GB. You are the man DanKam! You Know.....

FINALLLY, THE TUTORIAL IS OUTTTTT!!! Glad you are staying amazing, DanKamYouKNOWWWWWWWW

Had no idea about the amd ryzen master tool. Thank you so much. Super big help, you are awesome

Thanks for the advice about using Ryzen Master to be able to achieve 3200mhz RAM speed when upgrading memory while I'm still waiting on my Omen 25L with its Ryzen 5 3600 to arrive. I'm glad I watched your Omen videos to not waste $$ ordering more RAM directly from HP.

I just want to Thank you so much . I just got 32gb of ram for my 30L and it was set to like 2666mhz and watching this video made life so much easier.

Thank you - I've pretty much the same setup and followed your steps - worked a treat!👍

Great video - very straightforward & clear instruction and explanation! Really appreciate it! 👍👍👍

Thank you so much, I have the exact same computer HP Omen 30L Tower (however with a British plug!) and couldn't get my new 32gb RAM upgrade to to work at the advertised frequency.

BRO YOURE A LIFESAVER AFTER 2 HOURS WITH HP THANK YOU SO MUCH

Thank you so much! This worked like a charm. I recently bought an HP V10 32GB RAM kit at 3200MHz, in order to upgrade my Pavilion TG01 which came with Samsung 2x8GB RAM. I thought that the V10 kit would be 100% compatible (you know, being from HP), but lo and behold, it got downclocked to 2133 MHz. I was afraid I'd have to settle for the factory default specs, but you just saved the day man!

Worked perfectly! Thanks for that help :) I might be checking out the OC videos since I installed a NH-D9L in my lil TP-2066

Tysm! I’m getting a 30L (amd) and I wanted to add another stick of ram! This helped. 😄😄

bro wtf i watched 2 hours of vids and didn't learn nothing and I watched 10 mins of yours and I am a pro. and my ram is at 3200 now.

I LOVE YOU BRO. Ok so for context, I have recently acquired a gift card and I wanted to use it for a ram upgrade. Although I have never upgraded a pc so it was quite the daunting task and I had no clue what to pick for my system. BUT after I stumbled upon your video, I decided that you would be my best option and I will be buying the ram used in the video for my upgrade! THANK YOU so much for your kindness as this has made the process so much easier for me and a lot less stressful. I wish you the best and thank you so much for your recommendations and tutorial.

Super hyped Dan- Just ordered a second 16gb stick of ram, 2 noctua fans and the U9S CPU cooler. Can't wait to upgrade my Omen

I just bought an Omen 30L that included 16 GB of RAM. In anticipation of upgrading, I had already picked up 2 16 GB sticks of Corsair Vengeance Pro. I installed them and expected to have to adjust the settings in Ryzen Master, but I booted up, checked task manager and it's already running at 3200 MHz. Helpful video, anyway. I also picked up some additional fans and will be installing those soon.

Omg you saved my life tysm

I'm so glad you made this video. Shortly after I got my Omen 30L, I added 32 GB Kingston Fury 3200Mhz (16GBx2). Originally, the memory clock speed was 3200MHz without me doing anything. For the first two months I had it, it remained at 3200MHz whenever I checked the performance tab in the Task Manager. However, I unintentionally went into UEFI, and it showed that my memory clock speed was 2400Mhz. I double checked the speed in Task Manager and it was showing as 2400MHz. I'm already using Ryzen Master to undervolt my CPU (thanks for that video as well), so I followed this tutorial and got my memory speed back to 3200MHz, and it's remained there. Again, huge thanks!

Thanks DanKamYouKnow!!! Used this video to upgrade my Omen 30L - went smooooooth. Even went with the same memory off Amazon - saved a bit on the more expensive RGB memory stick from the other brand. Not much on overclocking the CPU but may try the automatic method 👍

Thanks for this. I was worried about the RAM issue as my HP Omen that I just purchased came with 16GB and I was looking to expand that to 32GB. This is a relief that you've shown us that we don't have to buy memory from HP.

Please stop. I just got my 25L and your videos are costing me everything that the Costco discount saved me.

Thank you for this...I have been looking everywhere for it!!

long time no see.Ive just installed my new ram and ive changed the ram speed with your help so thank you

bruhh, learning that a ram upgrade wont make much of a performance difference on my intel hp is infuriating. I bought this desktop with the sole intention of upgrading it later. but thanks so much for saving me some money!

I am happy to have found your videos, I just purchased a 25L and it is shipping soon. I saw on a reddit post that the bios was locked and it led me to your video. Thanks for this because I was worried I made a mistake in purchasing this. Is 3200 the max speed for this? I want to get ram that has speeds of 3600. If not, I'll considering upgrading in in the future.

Thx for the vids Dan, keep em coming.

A big big thank you. Your videos have been the only way I've kept my sanity dealing with, and allowing me to enjoy my Omen 30L. I followed this video a year ago when I added some additional memory to my HP, but somehow my ram speed dropped down to 2400. After a quick reviewing, it's back up to 3200.

Very informative video! There’s just one thing that I have to ask. Do I need to do anything in particular to get it to run in dual channel mode, or will it automatically be in dual channel?

Thank you so much for your help, my new memory stick now works at 3200 Mhz as it should. Are the change permanent or do I have to run Ryzen Master every time I restart the PC?

Thank you bro !!! Its exactly what i needed. I love you so much !!!

Dan, Great set of videos. I have the GT13-1094 ver of the Omen 30L w/ the Ryzen 7 5800x. I bought a 2, 16gb. Stick for 32gb RAM kit of HyperX FURY RAM. I followed your video on using Ryzen Master. Funny thing though. My system auto recognized the new RAM without having to adjust anything. Task Manager showed my system running at 3200 and my RAM at 31.8GB. What do you think HP did?

Holy shit I had upgraded my RAM like a month ago I had no idea they cap the speeds 😭 Thank you man. Can I close ryzen master or do I leave it running in the background?

Thank you so much for this video, I couldn't access the bios to increase speed and you helped me a lot.

The most helpful video I’ve ever watched. Thank you

Hey Dan HP recently dropped this new program called Omen light studio. You think you can make a future video on how to use it? Thanks bro

So if I buy more ram for my Intel edition 25l, will it make a difference at all?

Great video, took me 10 minutes end to end. I will be following your guide on recasing soon!

Thanks again! This worked great on my MSI DP20Z. I overclocked the ram while I was there because it was pitifully easy. I went from 8gb 2666mhz stock to 16GB CL16 3200 mhz clocked to 3800MHZ and I didn't even have to touch voltage, like I thought one had to do for really high clocks on ram. I think that's fantastic for basically $66 laptop ram/SODIMM. Here's what I used Crucial-Ballistix-Laptop-Gaming-BL2K16G32C16S4B. Now like any good monkey, I have to try it on every Ryzen I have!

So basically, you can only upgrade your RAM and keep the 3200 mHz speed if you have an AMD ryzen processor ? Great vid btw

HP locking the notebook BIOS is expected, because all manufacturers lock laptop BIOS. But HP locking desktop BIOS is just bad practice.

Once again your videos are here to help. Another successful install.

dude dan so many of your videos have been so helpful for me, thanks for everything u gorgeous devil

even with the recent BIOS update for HP OMEN. I feel like this video helped even better. For some reason on the HP BIOS i don't have an XMP profile and only just a custom profile. I wouldn't recommend playing with it unless you know what you're doing. This is still helpful with my recent HP OMEN upgrade. Thanks dude

Hey thanks a ton! Just got this system, will be upgrading to 32GB in no time thanks to you. Much love buddy!

I never posted a comment but wow, you deserve so many more subscribers, I was afraid to do something stupid with my PC but you showed the perfect tutorial, I went from 2133 to 3200 MHz, thanks you again!!!

Thank you mate, you saved me, great video! Keep up the good work! ✌️❤️

I been wanting to upgrade my ram for a while and struck a deal at micro center and now 16 gigs from 8 is amazing,Awesome video

I was desperate before seeing this video, thanks!

This helped me alot man. Thanks great video.👍

Beautiful. Thanks for this. Just picked up an omen 30l with a Ryzen 5800x and a 3060ti with 16 gig of ram. Won’t need to upgrade ram soon, but this is great info.

followed the steps exactly and now my pc is sitting pretty with 32 GB at 3200 MHz speed. you’re awesome!

Thank you Dan! Took one RAM Kit back because we didn't know this, but now it's all working at 3200MHz, YOU ROCK!!!

Extremely helpful video THANK YOU!

thank you man for finally fixing this prob for me love finally feel liked didnt get scammed cuz i bought new ram that wasnt even usable

i love tour Channel im rocking an omen 30L with a 1660 super and my ram was set so low thank you for this video

Amazing video, I'm a little late to the party but I purchased an HP Omen 40l and had this same issue when I swapped the on board Hyper X 16gb 3600 set for a Corsair Vengeance 32gb 3600 set. Following the steps of the video I was able to produce the same results by clocking at 1800 for 3600 total.

Worked like a charm. Thank you.

Thanks so much, needed this since i have the excatc same ram

Thank you so much bro, xmp was not working in the bios and this helped me a lot, I had 2400mhz but now I have 3200mhz. I could easily go to 3600 but ill hold onto it

I just got a Omen 25L with AMD Ryzen 7 3700x and a 3070 RTX founders edition. This Video made my Day. I sub'd back when I ordered it. Thank You for the time you have saved me, Next upgrade is Fans, then a Power supply and Guess who Already has those Vids in a Playlist waiting to watch. Again, Thank You

Thank you so much Dan!

Thank u so much bro this helped me alot luckily I have amd 🙌🏼

I spent hours in my bios trying to get my 3200mhz ram from 2133mhz with countless errors. Follows your video and fixed in less than 5 minutes. You earnt my like and my subscribe

I searched for so long trying to find info on how to enable XMP with my Omen 25L, only to finally realize the BIOS had been locked out. THANK YOU! I don't know why more Redditors haven't linked to either your channel or the Ryzen Master solution. So easy.

You do a great job with your videos!

Yo thanks for the vid it worked like a charm 👍

Thanks, your video helped a lot!

Amazing clear tutorial. Worked perfect. Btw looks like you forgot to include the link to your other video where you down ur voltage to 1.25 and change your other settings to 4100

Very helpful video. I'm about to replace my 16gb RAM for 32 and so glad I stumbled upon this.

I like how you stay on point in your videos,nothing worse than having a content creator jumping all over the place while explaining about 1 issue,in this case RAM,mine is ok from initial boot running @3200 Mhz.....I just got my 25L yesterday with Ryzen7,Radeon 5500,512Gb M.2,,,right away updated everything and promptly de-bloated Win10,this thing boots in 12 seconds now...tomorrow is SSD replacement..1Tb M.2 plus a couple of SSDs to hold games and whatever strikes my fancy.Cheers ya'll.