3 videos from Sorin in one day! Great 13th day of april :)

Thank you Sorin. For this basics of checking the power.

Absolutely loving all the videos today!

I was shouting upside-down 🤣 Great you don't edit out the workflow 👍🏻

Im have definitely put a chip on wrong before! Some people may not admit their mistakes but me and you arent afraid to! Love your work

Love to see you doing it your way. And it works fine with the right charger 🔌 and replaced chip 🍟

At this point you're my master in smd components, and how to checking circuits. If my master make a mistake (because it's human) I get more self confident because an error could happen to anyone. And I committed a lot of mistakes. Thanks for your videos, and your knowledge.

It's good to know the symptoms of a faulty pmic thank you sorin

That is not a laptop. That is a heater! Great job Sorin.

Lovely fix thanks Sorin

A simple bios flash would save you a lot of time!!

*Thank God I thought small chip burned meant I had to replace the whole motherboard. I’m watching this at night you made me hopeful. Shop can fix it tomorrow.*

Thank you for this. Came just at the right time in my suggested videos. I have one Dell here with similar issue. Coming on with battery but not coming on with the charger. But for this one the main power rail is available, but there is no 3.3v. And checking the Power chip, Adapter voltage goes in and is detected also but the ACOK pin is 0v. I'm yet to find the replacement chip to change and be certain.

people went wrong sometime but you are my master interesting repair more power sorin

Nice work Sorin.

I never solder them in wrong position but I do have the same issues you were having with the chip not budging even with high temps

At least you left the mistake in, many others would have edited it out. Easily done as many IC manufacturers are now putting white dots in one corner and recessed circles in the opposite corner. Thought you were going to break into song, quickly, a little bit of flux, a little bit of a new chip, a little bit of power management's all I need.

I didn't know that on desktop PCs the little triangles on both the microprocessor body and the metal frame had to match up. Imagine how many I fixed then (I was a beginner😊). On philips TVs at least twice I soldered the TDA9377... 64-pin IC called "jungle" upside down and it took hours or days until I realized it. All the best.

That big cooling pad under the chip was doing a perfect job.

Well done as usual!

Friday; got a beer, got some snacks, time to relax with some good edutainment. Cheers!

Sorin, I can assure you that you are not the only one soldering chips in the wrong position! X-)

Awesome video. Thank you

i yelled at you when you soldered the chip in wrong position, but i thought you didn't hear it 😂

can you make a video about reading schematic of ic and what voltages need to generate the gate output

well done!!

Good job mate 👍

I soldered an AS15-F chip the wrong way around not once, but twice in the same session ! I noticed it the first time and flipped it around 90 degrees - guess what: it was STILL wrong ! :)) Thankfully I noticed it in time and didn't actually put the T-con back in the TV to try it out :)))

I cant believe!! What happened to “we don’t care why theres no voltage on the gate” just solder a calibrated fuse lol😂 love your content sorin 👍

Love to see few videos

4:04 "nice nice" 😀 yes, yes 🤣

Sorin, would the thermal cam have showed the chip correctly as running very running hot?

Nice one! Short one too, master :) 🤗

youre the best guy in the world

Nice fault to be fixed 👌. When you have new chip. I had same problem with Dell inspiring 15. Bought 4 chips from China. All 4 of them ware bad. .

I have a question .Can we bridge the input mosfet as usual to make the laptop work ?

You should have measure again on the bq chip the gates so, you ilustrate us on the change of the measuring.

I have the same laptop, its amazing but recently it died in similar way. (Not taking charge, not booting from battery, just plain dead). I'm no electronics expert (I don't have these tools either, not even the multimeter) and I can't find a shop that's willing to find th IC thats causing the issue. It sucks that I want this to work. But stuck. Thanks for making this and other videos, It gives me hopes someone will be able to help with this.

Too much mix with your coffee Sorin is why you soldered it upside down lmfao.love your channel buddy 👍👍

good job boss

hello, i got the same laptop with the same fault, i waked with the video step by step, but i got 26 volts on pin 4 of the BQ chip, do that mean the BQ chip is fine?

Hello. During assembly can't use thr wrong sepaker because you can't connect it.

Love those videos, learned so much with you. I have a lenovo thinkpad e15 with a power mosfet e120gn that is burning hot that it disolder itself, i resoldered it to see if the laptop start charging the battery and it did but the mosfet starts to burn hot and do some smoke so its time to change it, where do you get your mosfets? Oh and have other laptop the same model that only starts if i press the cpu, so i think it some cold solder balls, should i do some heat on the CPU? What do you recommend? Thanks

Hey a question for the community, i just had my victus 16 cleaned out (they removed dust from fans) and i asked them to check the heat sink thermal paste since i was having overheating problems. They said it was fine but when i took it home the laptop would not charge when i plugged in the charger and it shut off completely at 8% battery and then it wouldnt show any lights and i took it back to the shop and they said they assume the motherboard needed to be replaced. Any information or advice is appreciated thank you

21.20, the same reason why Apple use 10 different screws in a MacBook's

@electronicsrepairschool i have the same problem, where can I find this power management chip for my Hp Victus 16", please?

i have a lenovo l340 gaming laptop have the same problem its charging when off but wont turn on

Friend of mine who is a car mechanic was doing a timing belt job. After putting everything back together he realised that brand new belt is lying on the table so what happened? He removed and put on the same belt😂

some time i am to happy and 100% sure fix the probleme maybe yes i can solder in reverse in hyper activity x) : Hp using 2 conector for left and right

Yes mr. Sorin, you are the only one😅

I have one of these machines and it comes with a bigger charger than that, this looks like a replacement HP charger. mine is 180W at least...

you've two different speakers conneters to distinguish between the left and right 21:50

It’s not soldered wrong if you correct it before powering up

Me too. I was put the chip in the wrong position and after 💥💥💥💥

Are your charging chips from aliexpress or genuine texas instruments? I havr tried to fix a laptop with similar issues, i get a 19v in to the BQ chip but no 3V 6V or 26V output. I think thats why my board is still dead.

What power supply are you using ?

i can't believe ...only sorin says this

I have soldered the chip in the wrong place many times. The key is catching the mistake quickly just like Sorin did.

And I have the same loptop and now it's happening to me and I can not charge it for ever now please help could be whats happening in the video

I need mine fixed please

ya Sorin of course i do solder component in wrong way , dont worry

I was trying to scream at you when I saw you putting the PMC in backwards. It didn't help at all.

How do I turn my hp victus on without the power button? It doesn’t work anymore .

Where is the cmos battery?

I have the same laptop 16,1 (variant with i7-12700h Alder Lake CPU and RTX3060 6GB VRAM). I have bought the new display panel for it - WQHD 165hz - compatible, HP mentioned of it on their service manual, but I can't buy the display panel adhesive kit. The oryginal charger is WAY WAY bigger and stronger than the client brought to You - model M31368-002 of 200W.

I havr ho victis which is not charging also please help

I believe every body was screaming....the chip is rotated.... Yes every body DO this....😂

17:57 Sorry Mr.Sorin but yeap your are the only LOL

How did u know that was the power management chip there is about 100 chips in the motherboard

how all laptop is failed ? pls best laptop no failed for gaming

cool

It's happening to me

At least you didn't solder the original faulty component back on....

Why would an IC - in this case Power management - fails if by design Voltages and Amps are all as per manufacturer specs ? Planned obsolescence ?

You just had the chip in stock ??

Hi , what's name this music

@13:19 - you check 3 pins on the chip and knowns that it is bad, how ? pin 28 = 19v pin 4 = 0v ping 6 = 2.5v what should have been on pin 4 ?

It happen to everyone

hello; mr sorin I have the exact same laptop series, I found it very neat since HP took the time to make all kinds of oem service videos on their www.youtube.com/@HPSupport official channel, everything is neat put and well fit together. I only had one problem after replacing the thermal putty with thermal pads, I used too tall ones at first, second time used 0.5 and had full contact. hopefully will never run into this problem but I doubt since the battery cannot be bypassed and it's in use all the time and without it the entry mobile 3050ti is weak af, with power it gets decent. GOOD WORK, best wishes! paste fericit!

Beginner mistakes. Haha. Scared to give 600 degrees and wrong orientation. Don't worry Sorin. One day you'll get there. Haha

Sometimes I doubt this guy. Pin no 28 is VCC of that chip, directly connected to charger. I don't know why he is excited when +19 v present at 28 th pin. Luck favours

looking forward to Secret component 2

nearly 200 watts into a laptop, as the man himself would say "thats crazy"

Can you repair mine?

I thought Sorin now get drunk but atleast he realised it is solder backword... Now Sorin is funny not us people watching Sorin do so

pls best laptop for buy 1000 euro ?

👌👍👍

what-ever happened to the Good-Old-Rosin, mmmmmmmmmm ...

No, u are not the only one. The biggest mistake is if u solder the damage (same) chip Back, and then you act like a fool and don't understand anything...

da, tre sa scoti placa... nasoala treaba :))

*BIOS chip here easy access* lets flash a BIOS

nah, you are the only one 😂😂😂

Sorin, you're getting old. The moment you soldered that chip, I wanted to say the chip is in wrong position. In my experience.. I take a photo before removing a chip so that I can verify the exact position before soldering back a new replacement chip.

That charger looks nothing like the proper charger so who knows where they got that from?!

chip on wrong

.

Garbage Laptop barely had mine and it wont charge anymore.

can always make a mistake becausew you atre ahuman lol...plus filming is a pain in the arse edit 18:03

Dodgy job..

Hehe