HPI GUY | VLOG 015 I Building A Super Lightweight Streamline Racing Quad
Рет қаралды 5,413
7 жыл бұрынI recently decided that I want to try build the lightest and fastest quad possible. To do this I used a sleek BoltRC Kracken frame and every micro part I could find, from micro FC to micro camera.
The end result was a 245gram speed machine. Thanks to my mate Jon from Atto FPV for helping with the build.
Banggood Affiliate link: goo.gl/Qo48rX
My Instagram: / hpi_guy
My Facebook: / thathpiguy
Donate to keep the channel going: goo.gl/pFQDBj
Thanks for watching.
@TheWowcol 7 жыл бұрын
Looks amazing
@HarleyFPV 7 жыл бұрын
Those RT2205 2700kv's from Gemfan are serious fun motors !!Have them on 3 builds now and not 1 bell have broken ;)
@connorking6315 7 жыл бұрын
That thing rips hard
@nocturnal1758 7 жыл бұрын
Crazy !
@blackmennewstyle 7 жыл бұрын
What a beast! Nice job :)
@S700KYFPV 7 жыл бұрын
Check the temp settings in BLHeli. Mine on one build was set to 80c and when warm they shut down. Increase to 140c should be good.
@fpvglasgow655 7 жыл бұрын
nice one big man that thing looked great thanks all the best
@lokisdream8438 7 жыл бұрын
Excellent post. Been eyeballin the Kracken as next build for a week. Sold on her now.
@yah5o 7 жыл бұрын
9:35 happy little guy :D
@makinator36 7 жыл бұрын
power jejeje!!!;)
@2crashy545 7 жыл бұрын
Yum, yum.
@s16non 7 жыл бұрын
VERY FAST!!
@SabbaTM 7 жыл бұрын
Nice build! Where did you find that conversion flight controller board? Thanks! :)
@AttoFPV 7 жыл бұрын
Sabin Cercel it's an Atto FC conversion plate. It comes with the frame kits from attofpv.com
@tobyking-cline9858 7 жыл бұрын
Firstly awesome quad, awesome flying. Regarding your quad falling out of the sky, I have some emax bullet 35amps that I am about to change out as I have had 2 fail on me now. People on forums have been saying that the FETs on the emax bullets are made by Aikon, and lots of the esc's have fake FETs that have made the quads fall out of the sky. I hope this helps fix your problem if you haven't already sorted it out.
@heliernst 7 жыл бұрын
where to by the FC and TX
@Ie0n1 7 жыл бұрын
How wide are those arms?
@demiquadfpv3333 7 жыл бұрын
hi mate love the build. am looking at doing something similar but cant find an fc 20 to 30.5 conversion board anywhere. could you comment a link to one please?
@primoziskra6394 6 жыл бұрын
I see you use FM800 receiver for Futaba. Is it working OK?
@DangerDavefpv 6 жыл бұрын
my kraken 5r weighs with props 289g with 2207/2650kv it runs 138mph on 5s
@217gatnnos 7 жыл бұрын
I assume 245 gamms without the battery. right?
@nocturnal1758 7 жыл бұрын
Yes looked like it.
@elliotfpv2645 7 жыл бұрын
honestly I think the lighter the quad is the better
@mtlracing1567 7 жыл бұрын
yup.
@alexcrowder1673 6 жыл бұрын
Agreed! My custom 4 inch is 124grams dry with KK 4045x2 or 126grams dry with HQ 4043x3. Its stupid fast. Almost uncontrollably so lol.
@FPVPortugalTV 7 жыл бұрын
No ground signal will lead you to problems...
@frinky 6 жыл бұрын
FPV Portugal No it won't...
@MadNitr0 7 жыл бұрын
I'm no expert but it sounds like the D term is too high
Undecided with Matt Ferrell
Рет қаралды 605 М.
Мамский әңгіме
Рет қаралды 870 М.
TROC Gaming
Рет қаралды 24 МЛН
Excited Bro
Рет қаралды 38 МЛН
Supper Wow
Рет қаралды 2,1 МЛН