HPI Vorza S fix and bash... now questioning the motor mount🤔

Рет қаралды 962

Жыл бұрын

#hpi #rcbasher
Seriously loving these HPI rigs as I say all the time😅 so I was pretty happy to get the parts I needed to fix it and then as always, take it for a test.
But I have one strange landing at the end of this video that caused my motor(mount) to move, it must have been a SUPER hard landing because it landed perfectly flat🤔
Front hinge pins 71mm (set of 2)
hobbiesdirect.com.au/HPI-Vorz...
Front hinge pin brace
hobbiesdirect.com.au/HPI-Vorz...
HPI Vorza S 6s: • HPI Vorza S 6s
HPI 1/8 Flux Truggy 6s: • HPI 1/8 Flux Truggy 6s
All my DIY carbon, aluminium or polycarbonate parts are cut with a jigsaw and drilled with a hand drill.
Most of my materials like Carbon Fibre, Aluminium and most hardware like screws, bolts and nuts are purchased from Ebay Australia but most of what I use is easily found just by Google searching the material or hardware you need.
Music made on the GroovePad phone app.
All editing done on my phone using the Kinemaster phone app.
Contact -
Email
saulaldridge@yahoo.com
Facebook
/ rc-crazy-110316407770980

Пікірлер: 17

@Rob702Life-qq1nx Жыл бұрын

I love your videos of the Vorza S. I have 2 of my own and they take a beating. The big problem is KZfaq's searches have a hard time showing any Vorza Truggy videos, it mainly only shows the old Vorza vids in a search. You have the BEST Vorza S Bashing videos online and I appreciate you for posting them, they have helped me understand and mod mine here in vegas and bash hard. Just put in a new ECOPOWER wp250t servo for steering on one and it makes a huge difference with 500 plus Oz of torque on 6v. I'll try to spread the word for your channel on the forums. Hope you still make some Vorza vids here and there. HPI is growing here again in the USA. Sorry you have to sell some of your cars.

@rccrazy Жыл бұрын

I seriously appreciate you saying that Rob, I'm glad my videos are enjoyable and if they help you out then that is amazing! Yes I noticed it's strange searching for the new truggy videos since there are so many of the old version uploaded. I got a few of the 35kg 9imod servos which I've really been loving, probably try one in this aswell👌 I won't be selling my HPIs no way so you'll see the Vorza and the Trophy Flux back out at times absolutely! Thanks again!

@addictedtorcs1981 Жыл бұрын

Hey there my KZfaq friend, sorry to hear that you're having to sell some of your RC Car's etc pal. Keep up the good work fella. Massive 👍's up!

@rccrazy Жыл бұрын

Yes sadly it's my only option at the moment. I have to buy a new ebike or a new battery for the ebike I already have aswell as I don't have a car license, that will cost ALOT. Oh well it happens🫤 Thank you very much!

@gillian9178 Жыл бұрын

I believe the motor mount design is mounted in a simular way to the Traxxas Sledge, that mount on the Sledge also has a habit of moving. The mount screws only have thin heads on the screws that sit in slots on the underside of the chassis, its a job to get the screws tight enough to stop it moving in hard crashes. On the Sledge I think M2C came up with different oval washer that sit in the slots under the chassis. You have to use different sets of oval washers to suit the particular gears used.

@rccrazy Жыл бұрын

That is actually a very smart idea yes, I might have to see if I can get them here👌

@libaxter5347 Жыл бұрын

A bit sad that you have to sell some of your rc's. But hopefully will help your channel out. 🙏 Your videos are getting better and better.😅

@rccrazy Жыл бұрын

Thanks Li😊 Yeah I wish I didn't have to sell anything but yes hopefully it helps grow the channel more, I don't seem to get many views with any cars really after the 2nd or 3rd video. That's understandable though, the newest thing on the market is always more relevant and appealing to people.

@runerally1 Ай бұрын

Hi, wondering why the screw on the damper on one side down is counter-clockwise ??? I can change this to one that goes "the right way"

@rccrazy Ай бұрын

Sorry I'm not sure what part you mean? Nothing on my car is installed wrong.

@timallen6035 Жыл бұрын

Good video. It's a big bummer that you are having to sell some of your RCs.

@rccrazy Жыл бұрын

Thanks Tim! No it's not ideal but hopefully it will be beneficial in the long run🤞

@HYPRCTV-dw3gw Жыл бұрын

Man that’s hard to hear about having to move on some rcs but once again awesome video, where abouts will you be putting your rcs up for sale I may be interested 👍

@rccrazy Жыл бұрын

Thanks👍 Yes it's very disappointing but no other option. Haven't listed anything other than my x-maxx on Facebook, been up for couple of weeks but I must have too much on it, no one is interested. It does need a new centre shaft and the centre diff is making a noise but can't even afford to fix it to get a better price for it😥 Other stuff will be listed soon I guess, so hard to sell any of my stuff.

@antoniobove9827 2 ай бұрын

Hey mate do you still have the xmaxx,limitless or maverick r flux for sale?

@rccrazy 2 ай бұрын

No mate sorry, regretful the xmaxx went close to 2 years ago😵 I want it back so bad😭 same dude bought the maverick. The limitless I'd never get close to what it's worth and I can't bring myself to part it out(disassemble) because it's magical to look at all painted and in perfect condition so I just kept it😅 $5k you can have it, like triple RRP🤣

@antoniobove9827 2 ай бұрын

@rccrazy fair enough I understand how you feel about selling the xmaxx, I had the same feeling when I sold my felony. Thanks for the reply👍👍