HPI Vorza S Flux Truggy - Draco Upgrades / First Run (Part 2)
Рет қаралды 287
Күн бұрынFinally the weather in Osaka is good to take the Vorza for a spin. I have the Draco prototype shock towers installed and the motor mount installed with the new centre braces. Check out this video about how the parts hold up to their first test. There is also a part 1 so just in case you have missed it check it out here: • HPI Vorza S Flux Trugg...
If you would like more information on these parts please check out my website.
www.draco-jp.com/vorzaparts
Thank you for watching!
@kylarstern7627 23 күн бұрын
Great video buddy, man that Truggy is smooth, it moves so well! I think I'll be definitely looking at getting one of these.
@2626bigbones 24 күн бұрын
definitely need a ramp, even a small portable one. or maybe check if they have a 1/8 scale racing track close to you for testing. need to get more air
@dracoprecision 23 күн бұрын
Yeah I’ve been thinking recently. I need to get 2-3m of air to test the parts properly.
@JimmyDaval-u4x 22 күн бұрын
My friend u should jump it high so pple can see the durability of your upgraded products... again 1 brace form tower to tower but better if there is like a rectangular shape like again losi tenacity db pro but insstead of goingfron gearbox to gearbox make yours be from tower to tower....
@dracoprecision 21 күн бұрын
I considered one brace from tower to tower but the likelihood of it bending was quite high. The brace mounted to the same place on the towers. With two braces it increases adjustability. I am going to continue testing like this and see how the braces and gearboxes hold up. Thanks for the suggestions!
@JimmyDaval-u4x 21 күн бұрын
@@dracoprecision u right but then i would suggest thicher braces with thicker ends cause those plastic things will brake quickly... in regards of the one brace , I have one aluminum brace on my losi db pro and jumped it high with no bendings... take a look at the shape of it ypurself n then u will realize how u should make it... take a look at a db pro brace shape then u will understand what I meant... again thanks for providing upgrades to hpi fans !
@radiocontrolledmadness8119 18 күн бұрын
@@dracoprecisionI’m kinda with ya a two individual braces is great a little flex means a lot for other parts
@dracoprecision 18 күн бұрын
Yes and makes it cheaper if you break something.
@Shellzwick 19 күн бұрын
Best way to test upgrades , is to jump it …..
@dracoprecision 19 күн бұрын
Yip I’m working on it. I don’t have a ramp so will have to make one or find a different place.
@Shellzwick 19 күн бұрын
@@dracoprecision yeah I got a ramp and a few bash spots . Gotta keep your eyes peeled while traveling to discover em
@dracoprecision 19 күн бұрын
Yeah man totally. I have a few riverbeds nearby that look good. Maybe I’ll try them out.
@Shellzwick 19 күн бұрын
@@dracoprecision and if you can’t find a slight incline area , you could add plastic kicker ramps for launching
Draco Precision - Custom RC Products
Рет қаралды 261
Jason Derulo
Рет қаралды 10 МЛН
Kaos RC
Рет қаралды 1,7 М.
Draco Precision - Custom RC Products
Рет қаралды 190
Aussie RC Playground
Рет қаралды 15 М.
Parkflyers RC
Рет қаралды 8 М.
Draco Precision - Custom RC Products
Рет қаралды 3,5 М.
Draco Precision - Custom RC Products
Рет қаралды 346