HSRP (Hot Standby Router Protocol), VRRP, GLBP

HSRP (Hot Standby Router Protocol), VRRP, GLBP - part 1

Рет қаралды 143,458

Astrit Krasniqi

Күн бұрын

Understanding Layer 3 Redundancy

Пікірлер: 53

@CharlesNgoh 8 жыл бұрын

You are gifted to transfer knowledge....very nice explanation prof.

@smartnfancy 7 жыл бұрын

Hello sir! Amazing style! Simple, straight to the point, no useless mumble details ! Congrats! Keep up the great work! Genius is in the SIMPLE approach! (Y) Happy to find you! :D

@mariav.gutierrez8926 7 жыл бұрын

Great video, it helped me so much. It's very easy to understand and follow in a lab enviroment. Thanks...

@SLBusinessTalkShow 9 жыл бұрын

Ma sha allah...superb explanation sir...keep it up

@slamtoo11 4 жыл бұрын

It took me a very long time looking for a video about this. Thank you for ur time.

@awesomestuff8819 8 жыл бұрын

Thank you for uploading this! this helped me out alot!

@ozzlikemike 9 жыл бұрын

Thanks for this, so well explained !!

@williamangulo7771 8 жыл бұрын

Thanks a lot, excellent contribution

@moneshbhagavathula4913 6 жыл бұрын

Very well explained sir. Thank you.

@keumenijoseph9298 Жыл бұрын

nice work sir, your straight to the point .

@ramosman0469 4 жыл бұрын

Thanks you! You explain it very easy!

@saaidelhadad 9 жыл бұрын

Thanks for clearing the HSRP confusion.

@mdimtiyaz7634 7 жыл бұрын

absolute way f teaching ! thanks for sharing mate .

@Zessenr1 5 жыл бұрын

Nice! I've been chasing a video to explain this to me a while now, none made sense, until now.

@JOSCAJU 4 жыл бұрын

This work for SIP, keeping all active calls and avoid the one way communication?

@godgige 8 жыл бұрын

great video ! thanks

@chaserzx383 9 жыл бұрын

thanks a lot great video

@MostafaLSh 3 жыл бұрын

great explanation thanks

@RandiEriko 2 жыл бұрын

nice and clear explanation. 👌

@alepharcane99 7 жыл бұрын

Thank you. This is a very simple and easy to understand explanation. Can you get more parts going into more details?

@AstritKrasniqi 7 жыл бұрын

You're welcome, Glad to help

@spiritualfamilyministiries 6 жыл бұрын

Nice one!!

@el_gol 3 жыл бұрын

Nice job! Thanks for this video

@AstritKrasniqi 3 жыл бұрын

Glad you liked it!

@sudhirkuvardiya5122 3 жыл бұрын

Thanks A Lot Sir You Explain very easily..

@AstritKrasniqi 3 жыл бұрын

You are most welcome

@mhmdmagdykhalil 3 жыл бұрын

It was very helpful thank you keep it up 🔥🌹

@AstritKrasniqi 3 жыл бұрын

You're welcome 😊

@wahidny 7 жыл бұрын

Nice video. Don't you think you need to create virtual interfaces for each interface and then assign the new default gateway to it? unless the interface you configured aren't used at all.

@rajakishan1 8 жыл бұрын

very good excellent

@adrianoscarlarrauri705 2 жыл бұрын

Excelente !!!!!!

@forex-chart-analysis-daily 3 жыл бұрын

this protocol can work un managed switch? no face problem loop and broadcasting?

@tahersadeghi6773 5 жыл бұрын

You keep talking about the group and group number. Question is what is a group and how do you set up the group?

@robearhong 7 жыл бұрын

hello sir, do you have a ccnp course?

@bunnygamer806 2 жыл бұрын

Can i use vlan or intervlan is this configuration?

@ramirez368 8 жыл бұрын

One command that I have hard time to understand is the "Preemt' in HSRP...that's is mean that if configure in the Active Router it keeps the Active even if the interface fails...? Please somebody....?

@ShoebHussaini 7 жыл бұрын

If an Active router goes down then standby with lower priority becomes Active, When the Router with higher priority comes up again then it will again become Active again because of Higher Priority.

@alper2421 4 жыл бұрын

Does the switch finds the 10 1.1.2 router with sending an arp- broadcast if 10.1.1.1 fails ? Or is it an unicast frame ? How can the switch can find the Mac address of the virtual router .10 in the mac address table ? I can't understand this :(

@alper2421 4 жыл бұрын

oh sorry, i got it i think. the switch will learn the new mac address after sending the broadcast and receiving an unicast arp reply from .2 because it is the active router when .1 fails.

@zoltron30 5 жыл бұрын

Where's part 2

@samuelwhipple875 6 жыл бұрын

Please give us the date of sale

@goodchanel8021 5 жыл бұрын

how VRRP Videos download

@user-wu7cj4qe4t 3 жыл бұрын

the routers communicate via the switch correct? there is no accttual conection in the topology right?

@AstritKrasniqi 3 жыл бұрын

Hi, that's correct!

@mohammodalemran8248 7 жыл бұрын

Hey..please share slides :)

@asuteles201 3 жыл бұрын

Hi sir I want to ask, what happen if router A configure preempt with default priority 100 And router B not configure preempt With default priority 100, If Router A down, Router B will take Active router, right? What happen If router A comes back On, whether it remains on standby router Or Active router, Thank you

@AstritKrasniqi 3 жыл бұрын

Hi Asu, Yes if Router A fails, Router B will become new Active router. When Router A comes back online, if preempt is configured in Router A, then Router A will take the role back as Active router and router B will go back in standby. Preempt it says the election is ongoing always similar to STP. Kind regards Astrit

@asuteles201 3 жыл бұрын

@@AstritKrasniqi Hi Astrit Thank you for his enlightenment. Regards Asu

@Bhexo 5 жыл бұрын

Bravo o Astrit flm a lol

@bhagayamma2311 4 жыл бұрын

kzfaq.info/get/bejne/bsiajLGJu9_diHU.html part-2

@AltJisatsu 8 жыл бұрын

THIS IS SO CONFUSING I DONT KNOW WHICH PROTOCOL UR TALKING ABOUT AT ANY GIVEN TIME ITS ALL OVER THE JOINT IM TRYING TO DO A REPORT AND I CANT USE THIS INFO ANYMORE

@AstritKrasniqi 8 жыл бұрын

Hello Thai, on the video that you where watching is named HSRP, so that's the protocol that we are talking about