HuaMeng YS3M Setup Tutorial

Рет қаралды 4,414

Күн бұрын

springs for life
Ball Core: www.thecubicle.com/products/h...
Standard: www.thecubicle.com/products/h...
Gravitas: www.thecubicle.com/products/a...
XMT-10: www.thecubicle.com/products/l...
Silk: www.thecubicle.com/products/c...
You can use code MRM at checkout to save 5% and support me

Пікірлер: 56

@StevenWintringham Жыл бұрын

The text at 9:13 was supposed to say that I ended up loosening it slightly more I also forgot to mention that the springs loosen up over time as the cube gets broken in, so you may want to use a lower compression setting initially and increase it after a few hundred solves

@Rango-Tha-God Жыл бұрын

Great straightforward Setup, can’t wait to do this tomorrow!

@StevenWintringham Жыл бұрын

Let me know how it turns out

@michaelnielsen3551 Жыл бұрын

Common Steven banger set up tutorial

@2oux Жыл бұрын

Your setups crack me up bro there's no way

@StevenWintringham Жыл бұрын

How so?

@2oux Жыл бұрын

@@StevenWintringham using the purple corners is a very strange placebo

@StevenWintringham Жыл бұрын

@@2oux using the teal corners important because the core magnets are embedded in them, but my main YS3 randomly got really slow sometimes and it hasn't done that since I swapped edges

@This-Is-Rahi Жыл бұрын

Perfect 👌🏽🤌🏼

@tryhardfighter1833 11 ай бұрын

My Y already has edge magnets and springs swaps. Nobody else would tell me how to tension and lube THAT. So I went to the master.

@ZekeMackay Жыл бұрын

i watched this video on mute but i think you did a good job of explaining things

@StevenWintringham Жыл бұрын

Bro...

@wallford49 Жыл бұрын

Food setup tutorial bro. Out of curiosity, do you know about this setup because Stanley uses it in general, or specifically for the ys3m?

@StevenWintringham Жыл бұрын

Yes

@wallford49 Жыл бұрын

@@StevenWintringham steev in

@notanonymousperson 9 ай бұрын

I unfortunately do not have xmt or silk but i have the angstrom duo, mystic, dnm, trax 50k, and stardust and lunar. What would you recommend to setup my huameng if i were to look for a similar feel?

@StevenWintringham 9 ай бұрын

Probably just gravitas and dignitas

@notanonymousperson 9 ай бұрын

@@StevenWintringham Thanks

@AndyMok Жыл бұрын

Yo Steven 3 M

@ErzKmut09 8 ай бұрын

Is the hub much better with springs? Like the modified Wrm v9?

@StevenWintringham 8 ай бұрын

It doesn't make as much of a difference as it does on the v9, but I still think it's better with springs

@Burnno Жыл бұрын

Early bro

@SlurpMobile 6 ай бұрын

Is there any substitute for xmt 10 that is a cubicle premium lube?

@StevenWintringham 6 ай бұрын

Not really, but thecubicle sells xmt

@simplycubing Жыл бұрын

I just unmaglev my magic clothes ys3m and it is insane

@StevenWintringham Жыл бұрын

Springs ftw

@simplycubing Жыл бұрын

Are you gonna sell them

@StevenWintringham Жыл бұрын

@@simplycubing probably not

@Orkkjj Жыл бұрын

Spring is better than maglev why tho?

@StevenWintringham Жыл бұрын

More controllable and I think it feels more consistent

@Orkkjj Жыл бұрын

What edge did you replace to the ys3m?

@StevenWintringham Жыл бұрын

I put YS3 standard edges in the YS3 ball core

@Tej_aerocuber 10 ай бұрын

How did you set up Luke grisser gan 12?

@StevenWintringham 10 ай бұрын

Video soon

@Tej_aerocuber 10 ай бұрын

@@StevenWintringham thanks

@TERRORSPEED Жыл бұрын

Food cube

@carlos-cf1vn Жыл бұрын

god damn silk gravitas xmt10 thats a extremely slow setup you might wanna change the xmt 10 with some dnm

@StevenWintringham Жыл бұрын

I try to avoid DNM because it is humidity-dependent

@carlos-cf1vn Жыл бұрын

@@StevenWintringham oh alright that makes sense since personally I like cube who can do u4 in one flick yeah😂

@echo6509 9 ай бұрын

can you use the springs of rs3m 2020?

@StevenWintringham 9 ай бұрын

Yep! The super has different springs though

@echo6509 9 ай бұрын

im considering to use the srpings of rs3m 2020 because i didn't have the standard ys3m. Does the rs3m 2020 and ys3m standard have a different springs?

@StevenWintringham 9 ай бұрын

@@echo6509 they are the same as far as I know

@echo6509 9 ай бұрын

@StevenWintringham Alright I'll try modding it, thansk alot man 😁

@StevenWintringham 9 ай бұрын

You're welcome! If the springs do end up being different, it should still work, but you may need to use a different compression setting. Also, If your RS3 M 2020 is fairly new, you may need to start on a lower compression setting and increase it as the springs break in - they are a little stiff out of the box