Lcd screen change Huawei P10 Full Video HD Buy LCD amzn.to/2Gu42ed For any help: / mobileservice.fr
Пікірлер: 44
@chornii_boumer73243 жыл бұрын
Thank you for the video it helped me to install my new screen on. I would look like to make you realize that your new screen didn’t came with a speaker filter, so you’ll have to install the old one. I am realizing now also that my new screen didn’t came with a speaker replacement.
@freitasaf805 жыл бұрын
Hello, the GPS signal from my huawei p10 plus gets lost at all times, would it be defective in software or hardware? Thanks for listening.
@lembuku4 жыл бұрын
GREAT VIDEO, I SUCCEEDED, THANKS BRO...
@MOBILESERVICE1234 жыл бұрын
Welcome 👍
@maczalminaza96125 жыл бұрын
How about the finger print scanner? Is it still works?
@specta41545 жыл бұрын
i have dust under the screen between the backlight nd the touchscreen , i am just looking for a way to open it without breaking anything to just clean up the dust
@exclusivesylhetychannel67993 жыл бұрын
Is the lcd disply original which link you suggesst in description box?
@viljarniit20936 жыл бұрын
You forgot to put the speaker grill back
@annickzanussi5755 жыл бұрын
oh neeeey 😂
@hassankhaled20094 жыл бұрын
Hey My mobile screen doesn't lite up it works well but i have to point a flash light into it to see what on screen, so everything is okey except the screen light is missing , it was dropped in the water after that the problem appeared
@OFDM-network3 жыл бұрын
Is the front display glued to the rest of back of device?
@BENBENNY2 ай бұрын
Really helped me alot thanks.
@sidathou7194 жыл бұрын
អេក្រង់វាតំលែប៉ុន្មាន
@thekaydenkikishow2364 Жыл бұрын
does anyone know what type of glue is recommended?
@labib20305 жыл бұрын
Does the phone work as same and as fast as before... ?
@user-tu7zj5zh4r5 жыл бұрын
how to fix my phone huawei its hard it got water insideits p10 pro
@keemboss71695 жыл бұрын
Next time use a suction cup bro
@malkaaydo55613 жыл бұрын
شكرا🤗
@muhdadib81135 жыл бұрын
Did the fingerprint works after replacement?
@asifjamil9005 Жыл бұрын
Yes
@jazminagacitua37976 жыл бұрын
what type of adhesive do you use?
@jhou5 жыл бұрын
B7000, search it on Amazon and you will find it
@martinkobalun54355 жыл бұрын
S6shehr
@PadiTetteh6 жыл бұрын
When does one buy the screen replacement with frame? And when not?
@jhou5 жыл бұрын
With frame when the prices is not much higher or without the frame is a lot more difficult, and without frame when price is a lot lower than with frame or it is not that difficult to do without the frame. Hope it helps
@BevisFriend20105 жыл бұрын
Buying a frame means having to transplant the components which is totally unnecessary & adds a while onto the fix time. THE ONLY time I would buy a frame is when the existing one was twisted or bent, otherwise buy them without. Use a heat-plate instead of a gun. They're about £20 and loads less trouble, plus you can fix 3 or 4 at a time using them & the heat is uniform. With the button being recessed slightly AND plastic, the heat plate won't damage it whereas a gun could. Just a basic craft blade with sail through the glue after heating on 100 degrees C for about 3-4 minutes. Heat plates > Heat guns.
@asifjamil9005 Жыл бұрын
I want this panal please tell ma what is his price
@TheKornick2 ай бұрын
Thanks!
@fredm2495 жыл бұрын
what glue is that?
@MOBILESERVICE1235 жыл бұрын
Glue B-7000
@sidathou7194 жыл бұрын
$?
@rafsanrishad104 жыл бұрын
Price.?
@db12364 жыл бұрын
4:55 what air temperature?
@Ilegator4 жыл бұрын
not too much
@jamessilly68374 жыл бұрын
Well I've got the warning on my phone that it was overheating (in the sun and charging) and it was hot enough to be very uncomfortable to touch. I would get it just hot enough to burn you a bit.
@Ilegator4 жыл бұрын
@@jamessilly6837 you probably fucked up the battery. Never charge the phone under the sun.
@jamessilly68374 жыл бұрын
@@Ilegator battery is fine, only reason I'm looking at this video is because I smashed my phone in my pocket at work, bent the back so far in that it cracked the front. It's still working just fine, absolutely no change in performance from before besides the ugly screen, I just want to replace the front and back frames. Got all the parts and tools coming in the mail shipped for like $50 so I'm stoked to have a phone I don't have to worry too much about as just about everything is cheaply and easily replaceable!
@zunairaawan88505 жыл бұрын
Agr phone ma sim pas jay tu kia nihkal jati ha agr jacket bahir na nihkal re ho
@jeaninesanandres31682 жыл бұрын
The fingerprint won't work
@BevisFriend20105 жыл бұрын
So many errors in this, I swear he works the for parts department. DO NOT unplug the Antenna as the male socket is tiny & literally connected to a gnats pube. The sockets are REALLY fragile and if they come off the board, that fine brown wire is TOAST no matter what. SO. LEAVE the white antenna attached and take up the board carefully leaving it plugged in. That little error set me back two days & a tenner. I could have done a better job without this stupid walk-thru, just from fixing P9s. The whole walk through could be less than 5 minutes long. Heat-plate, cut glue, unscrew, unplug, reglue, replug, seal. DONE !