MK8 Upgraded Pendulum (Dogbone) Mount DIY and Testing

Рет қаралды 89,608

2 жыл бұрын

The Dogbone Mount MK7 will also fit the MK8 GTI and MK8 Golf R. Why should you upgrade the doggone mount? If you upgrade your engine mount, will you get engine vibration? Should you replace the whole dogbone, or just the bushing insert? How to properly install a dogbone insert, and how to replace the whole dog bone mount. All this and more while installing the ‪@034motorsport‬ Billet DogBone Kit! #humblemechanic #034motorsports
Be sure to double check which mount your car has!
Billet Dog Bone ~ bit.ly/3N3uGgI
Lower Insert ~ bit.ly/3ubxe3r
Upper Insert ~ bit.ly/36wXmxx
Mount kit im using in the TT build ~ bit.ly/36xjs3e
Other Great MK8 Modifications ~ • MK8 Golf R
~~~~ Support the Show ~~~~
Become A CrewMember ~ goo.gl/D7eROI
Patreon ~ www.patreon.com/user?u=4243029
Shop Amazon ~ amzn.to/2FQErAm
Audio ONLY Podcasts ~ goo.gl/5XcZxB
~~~~ Recommended Tools ~~~~
Impact driver ~ amzn.to/2HsxS2H
Small Impact driver ~ amzn.to/2DZdsMN
Electric ratchet ~ amzn.to/2FydxMS
Magnetic tray ~ amzn.to/2FEpQ6g
Basic hand tools ~ amzn.to/2GnjF7K
Box wrench set ~ amzn.to/2FzoJch
ScrewDriver set ~ amzn.to/2FEjcgd
Shop towels ~ amzn.to/2FC7UgM
Torque Wrench ~ amzn.to/2I7ke5h
Allen Sockets ~ amzn.to/2GlcnAz
Torx Sockets ~ amzn.to/2pL0SfL
~~~~ Playlists ~~~~
Humble Mechanic Podcasts ~ • The Humble Mechanic Po...
Project White Wookie ~ • MK3 VR6 GTI Project Car
Failed VW parts videos ~ • How VW Parts Fail
Tool and Product Reviews ~ • Tool and Product Reviews
How To videos ~ • How To Fix Your Car
MK1 VR6 Swap Videos ~ • VR6 Engine Swap MK1 Ca...
~~~~ Be sure to follow me at ~~~~
humblemechanic.com
INSTAGRAM ~ / humblemechanic
FACEBOOK ~ / humblemechanic
TWITTER ~ / humblemechanic
Amazon Store ~ www.amazon.com/shop/humblemec...
disclaimer:
The content of this video is available for informational and educational purposes only. It is not intended to be a substitute for the professional advice of a mechanic who has personally inspected your vehicle, nor does it create a relationship of any kind between the Humble Mechanic and you. Every situation may be different, and the Humble Mechanic does not make any warranties, whether express or implied, as to the accuracy, fitness, or applicability of the information or automotive parts portrayed in this video to any project and makes no guarantee of results. The Humble Mechanic and any sponsors of this video will not be liable for any damages related to personal injury, property damage or loss of any kind that may result from the use or reliance on this video and/or any automotive parts represented in this video. You are using the information and automotive parts portrayed in this video solely at your own risk.

Пікірлер: 170

@ragnarironspear1791 2 жыл бұрын

I find your videos fascinating 👍🏻

@dasautogt 2 жыл бұрын

Always enjoy these particular (traditional) HumbleMechanic vids. How nice is it working on a brand new under carriage.👍😁

@GermanEliteTuning 2 жыл бұрын

Awesome install and review.

@Zoldran 2 жыл бұрын

Thanks Charles! Great video as always. Looking forward to the upgraded sway bar vid :)

@joshhohler949 2 жыл бұрын

Great info! Always looking forward to your upcoming videos. I'm especially interested in seeing and learning more about VCDS adaptations regarding such features as hill hold assist changes or removal, different lighting features, or anything else that could be tweaked to preference. Thanks again!

@davidmusiyenko4158 2 жыл бұрын

More please! I love this!

@MegaHollywood1971 2 жыл бұрын

Very well done Charles! As per usual 👍

@brandonsoo5386 2 жыл бұрын

I installed the 034 pendulum arm and, upper and lower inserts on my Mk7.5. The only time I experience the most vibration was engaging first gear after that it's all good. I love the stiffness when getting on it. It just feels more solid.

@Artemis_Prix 2 ай бұрын

For my manual TTRS, I believe the bottom insert is the perfect compromise. It makes a big difference in terms of improving shift feel and minimizing drivetrain movement, while having no detectable increase in NVH (no joke). However, the dogbone bushings will only last 10-12k miles when the bottom one is installed. I had installed the upper insert as well at a later time. Although it provided a modest increase in shift feel, it unfortunately resulted in a major increase in NVH. In addition, it provided zero improvement in terms of the longevity of the dogbone bushings. In fact, they only had lasted around 8k miles which was contrary to what one would expect. By comparison, the OEM dogbone bushings last about 15-20k miles. Can't comment on the 034 Pendulum mount upgrade.

@austintrajkovski3007 2 жыл бұрын

FYI, you can do just the pendulum bar to make a massive difference on hop in a gti without needing the inserts and not much added vibration from experience. I ran the apr insert on my 7.5 gti and done very little and added a lot of vibration, and ended up snapping my stock pendulum mount, remove the insert which was bent as well and just went for a full apr dogbone bar and the car is soo much better less vibration, more grip, less tramp, smooth wheelspin and more responsive front end on the power, highly recommended to do just the dogbone bar

@noahk9217 Жыл бұрын

You left the OEM rubber bushing in place with the APR pendulum bar?

@ricardohelleisseverini3592 10 ай бұрын

I have the same noakhs’s doubt here buddy.. pls answer us

@dalesmit7869 2 жыл бұрын

Thanks Charles, good advice always! Waiting for the 8R to arrive in South Africa.

@mariusnenu 2 жыл бұрын

Great info. And just to reinforce what you said ref improving the shifting, it does make a difference. Even if you have an older higher mileage car, changing the dogbone, even with a stock one, will have a positive impact on the shifting.

@rubabimtiaz6435 Жыл бұрын

ab vf ratty gttt

@slickrtm Жыл бұрын

Thanks for the vid!!! Just had the pleasure of replacing the pendulum bushings with the 34 on a Passat b7…. Mine destroyed itself after 10 years, but if you can get away with just inserts, I highly recommend! The “not fun” Charles mentioned is an understatement 😂😂😂

@spencer1320 2 жыл бұрын

I am excited on seeing a aftermarket shift knob!

@landoncook4529 2 жыл бұрын

My nephew bought a 2018 GTI and he's noticed a slight rattle when accelerating in first or reverse. I said this part may be causing it, or something in the exhaust. So strange that you release a video about it literally 2 days later, lol. Great video, Charles!

@davidrelyea6284 2 жыл бұрын

More likely it's the transmission mount.

@karstgeo7290 2 жыл бұрын

Good one...like the underside footage.

@motor_citymuscle288 2 жыл бұрын

Keep these vids coming!!

@HumbleMechanic 2 жыл бұрын

glad you like it!

@guyver96 2 жыл бұрын

I changed out my dog bone bushings on my mk4 years ago after going through several of the poly and rubber ones. I eventually removed the smaller bushing and replaced it with a solid aluminum piece no regrets since. I actually have a video in my youtube page show right after the install on a test drive im fine with the nvh and ride quality, i guess its comparable to rose joint mounts, Most of my noise back then came from my Tt coilovers being slammed.. ive since gone to lowering springs..

@bmuns6445 2 жыл бұрын

My 3 favorite upgrades on my 2014 GLI : (1) Unitronic Stage 1 ECU/TCU Tune (50 more hp, nearly 100 more tq) $900 (2) 034 Motorsport Rear Swaybar (no under-steer, rides like on rails in curves) $260 (3) 034 Motorsport metal dogbone insert. Improves shifting with no NVH. $50 I would do this to any VW car in the future.

@Sagiso2746 Ай бұрын

I find it ironic that I just got a Unitronic stage 1+ tune for my 2014 Gli, and have a 034 rear swaybar, 034 metal dogbone inserts, and a torque solution billet pendulum mount on the way.

@maldo72 2 жыл бұрын

my man, you have come a long way from when I saw your first videos .. saw your comment from Eric the car guy ... which is strange I thought I was subscribed to your channel from before anyway subbed and will catch up

@HanifEFIMechanical 2 жыл бұрын

good work

@westonfields4320 2 жыл бұрын

Mk4’s really benefit!

@jernigan007 2 жыл бұрын

It was worth it on my MK6 !!

@RangeTimeRicky24 4 күн бұрын

Thanks for doing this. From the beginning we have noticed this bushing and the clunk it creates. On our last trip from SE Idaho to NW Washington we noticed an abrupt clunk numerous times on the steep downhill side of the passes so we are hoping these inserts help.

@dicknodnfs 2 жыл бұрын

It seems that unless you tow your stock car (never understood that), and scratching for tenths at Nationals, the inserts are better for daily and back road comfort driving. Improved shift quality and turn in would be the big plus for me. Well done.

@SunnyFLBoy 8 ай бұрын

what is better for shifting? The whole thing or just the insert?

@dicknodnfs 8 ай бұрын

If you daily your car, get the insert and a shift kit. Compliance and predictability are where it's at.@@SunnyFLBoy

@BenLinn 2 жыл бұрын

Yeah on my mk4, the subframe bolt was stuck and the head broke off. and then where it went into the trans, the threads stripped. So I got a new subframe and put new steel threads in the trans, working great now! I got polyurethane though so my whole cabin shakes at idle

@rubenm.391 Жыл бұрын

Thanks!

@rubenm.391 Жыл бұрын

Just installed the 034 motor sport billet pendulum mount and the upper and lower inserts using your video and holy cow what a difference! I did purchase the full kit with the new upper and lower pucks but will install that when I drop the subframe when I do new lower control arms. Keep up the good work on awesome videos 👍

@NorthCoastWorkshop 2 жыл бұрын

I fitted a yellow Powerflex insert to my cupra R's dogbone mount last year, and I'm still debating whether to swap it for a slightly softer red insert (for diesel cars), as the vibrations in reverse, and low down revs is a bit harsh. Great informative vid as always! 👍

@MrZyLeXx 2 жыл бұрын

Im pretty sure im running the purple one in my car, not too bad and i recently fitted the entire arm and i don't feel that it made a huge difference in terms of vibrations, i have not launched the car since so can't say if it helped with wheel hop or something like it.

@sibzilla 2 жыл бұрын

Cheers for this comment!

@youbetoomuch 2 жыл бұрын

Dont own a vw but enjoyed the video ... Great how to personality brah

@HumbleMechanic 2 жыл бұрын

Thanks so much

@primalurges_ 2 жыл бұрын

i have a mkv rabbit and put a polyurethane dogbone insert in, reverse has never been the same since but overall the shift feel was worth it

@primalurges_ Жыл бұрын

update: i got a spherical bearing mount for it too and it's made the nvh too intense

@victorchen8484 2 жыл бұрын

That mod is the one added the most nvh for me. Especially on a low start

@gvi341984 2 жыл бұрын

Will we ever get updates on your older VWs? Still waiting for that awesome content

@eden4949 Жыл бұрын

My 7.5 GTI (DSG) had this exact 034 insert, I must say I mostly noticed more vibration, there was a v small improvement, not sure if I'd do it again

@laalaa99stl 2 жыл бұрын

*Insert obligatory warning about never re-using dogbone bolts. TTY!

@turboshottho 2 жыл бұрын

just be mindful if you do re-use i reused but didn’t crank down on them like a new TTY

@wassymassy2290 2 жыл бұрын

I have a issue with my Mk7 with 100,000 miles. A misfire on cylinder 3 only, misfire is only on idle. Did compression test 190 on 1,2,4 and 160 on 3. Changed spark plugs, coils, injectors, and did a carb clean. Any help on what it could be the issue would be appreciate it.

@jordonmiller6422 2 жыл бұрын

🔥🔥

@mrsluigi9478 2 жыл бұрын

Hey HumbleMechanic, where do you find service manuals for any car? How are repair manuals even made? Do manufacturers make them themselves and let only dealer techs have access to it? Is a DIYer not allowed to know the Torque specs for their engine/chassis/etc? I go coocoo for cocopuf- I mean torque specs! Everyone seems to hand tighten things down and call it a day.

@nickfoucha6946 2 жыл бұрын

Hey Humble, subbed when I got my white 2022 Golf R. I have H&R springs ordered and I’m looking into wheel spacers to get the stock wheels flush. What size spacers would you recommend? Love the vids!

@HumbleMechanic 2 жыл бұрын

I think Paul and I found 11/15 to be just right

@diydrivenGA 6 ай бұрын

Charles- how often have you seen that bolt holding the insert needing to be retightened? Is it likely if not tightened to spec?

@Jdmorris143 2 жыл бұрын

That Buzz had me laughing.

@AgentOffice 2 жыл бұрын

Have you installed the suspension harmonic damper

@eleazarcassis2870 Ай бұрын

three related q's to the subframe and dogbone bushing 1- are poly inserts for the subframe bushings on a 2015 tiguan with 6A transmission make any difference? pros/cons 2- does inserts (poly), extend the life of the original rubber bushing? 3- can poly inserts be used to compensate wear of oem rubber bushings

@iZephiroth 2 жыл бұрын

@HumbleMechanic would something like a Fluidampr help with some of the NVH these mounts cause?

@alanburke76 2 жыл бұрын

I’ve been thinking of this mod for my mk7 for a while. What’s the difference in just the upgraded dogbone? Instead of all together, just installing the dogbone?

@vijaychampanaria7809 2 жыл бұрын

I installed both inserts ..took them out after a few months ..Got tooo much vibration on acceleration

@friscostreetstories5403 2 жыл бұрын

O34s billet dogbone for a Mark4 R32 is the best one on the market.

@rockheadbikes1675 2 жыл бұрын

I have the Racingline Pendulum mount. As well as the upper and lower racingline pucks, racingline engine and motor mounts. Do you think the pendulum mount is worth installing if Im going to install the upper and lower pucks as well as the engine and motor mounts? Im going to track the car but the car will be driven as a daily driver. Or can you give any advice on which parts I should install first and then test that I have?

@ErMz1984 2 жыл бұрын

Hi Charles question do you think the callipers and router from the mk8 R will fit on the mk7.5 R or the router of the mk8 on the mk7.5 R🤔?

@Hedgehodge- 2 жыл бұрын

I noticed it my mkiv because of the jenky cupholders and it looked like Jurassic Park after install lol, get used to it though. Just tell the wife it's a bonus feature Terrified to try the spherical one. Probably rides like a Harley afterwards

@scirockalot8v 2 жыл бұрын

I've pump the gaps in the oem bushing with 3m window weld. Hack...hack yes.

@HumbleMechanic 2 жыл бұрын

I did that on the S4 😂😂

@crispyone2564 4 ай бұрын

I just did the upper/lower insert on my mk8 and it’s waaaay too harsh. I’m gonna take it out and try to make sure it’s not bound up when I tightened it. 034 has a video saying it can be installed wrong and is a lot harsher

@2810Mad 2 жыл бұрын

The long boy always goes in the back

@billabong3610 2 жыл бұрын

Is Auto Repair Shorts allowed to post your old videos and clam them as his?

@bretgtimk7968 Жыл бұрын

Im getting a chatter vibration which im thinking it is the inserts. Also do i need to jack up all four sides so the trans can swing a little if need be? Im installing this on my mk7 gti

@MegaHollywood1971 Жыл бұрын

Hey Charles. Do you know the specs of the Pucks? I am trying to acquire a bushing removal tool kit so that I can replace them. Any ideas? Would appreciate that 👍

@eric6650 2 жыл бұрын

What’s the reason you go +90 degree after torquing?

@hugovivas1265 2 жыл бұрын

Hey bro what happened with the black r32 you was fixing???

@rars0n 2 жыл бұрын

My car (2017 GTI, bought used, still stock) hops violently if I try to accelerate hard from a stop (it bangs so hard that it sounds like it's going to break the car). It's so bad that I thought maybe one or more mounts were bad. I'm not sure if it's a normal amount or not, but your footage with the stock dogbone shows a lot of engine movement, so I'm hoping that replacing the dogbone will eliminate it. I intend to continue to modify the car and run it at the drag strip so I am erring on the stiffer side. I'm no stranger to stiff drivetrain mounts and I actually prefer some of that vibration to come through, especially on a vehicle that is as quiet as this car.

@mco599 2 жыл бұрын

Are those 2 catalytic converters under the car?

@benzineist 2 жыл бұрын

Any thoughts on the longevity of that spherical in the arm? I know I had spherical endlinks on my car and they seized 100% in about a year.

@034motorsport 2 жыл бұрын

Due to the location these are mounted, this spherical bearing can last years without issue. We have yet to have a single mk7 dogbone spherical come through for replacement so far!

@ryantornai945 2 жыл бұрын

Ive had an 034 spherical arm in my mk5 for like 5 years no issues

@jameslovett8697 Жыл бұрын

@@034motorsport How much does this improve traction in say a GTI TCR?

@034motorsport Жыл бұрын

@@jameslovett8697 hard to say how much exactly, but by keeping the motor from bouncing on the mounts, it will help improve traction, along with our upgraded motor and trans mounts as well.

@VincentSmith_apk 2 жыл бұрын

Fiesta ST has a similar problem. The rear motor mount is so bad that sometimes the engine actually slaps the firewall under hard shifting. Also puts alot of stress on the passenger side mount. 50k miles later and I'm finally doing some upgrades.

@scoob66 2 жыл бұрын

focus too lol

@SamaraRing 2 жыл бұрын

That is not even possible, what are you talking about?! Rear engine mount is too soft from factory, but not anywear near to hit the firewall.

@aidenshearin1637 8 ай бұрын

I’m very curious to see if the rear sway bar 034 motorsports has will fit. I remember it being one of the best handling improvement modifications for the mk7 and I want to see how it would affect the mk8

@HumbleMechanic 8 ай бұрын

The one they initially sent me didn't. but the standard MK7 bar did. I think by now they should have the catalog dialed in

@JaredSVX 2 жыл бұрын

I'm curious...do you know what the highest torqued bolt on the car is? That 130 looked like a struggle!

@guku4163 Жыл бұрын

Guessing Axle bolts.

@DuanDao 2 жыл бұрын

Curious if the Mk8 side mirrors are the same as the MK7 wouldn't mind having that blind spot indicator on the mirror housing

@HumbleMechanic 2 жыл бұрын

It doesn’t seem so

@mickrob22 2 жыл бұрын

So US/Can mk8 R have 2 cat like the Euro mk7.5 R ? weird that it sound good

@dorkultra 2 жыл бұрын

would this help with the bucking motion that you get when starting off of the line or is that more of a 4motion engagement thing?

@spinnetti 2 жыл бұрын

Yep... that's the engine flopping around. This, and motor mounts makes it go away.

@syrconcrete6399 Жыл бұрын

does this also fit the 1.5 Tsi mk8 golf?

@brandonpena3516 Жыл бұрын

Hey Charles. I'm not sure if the top dog bone mount has a nut or something because i needed to replace my old bolt of the subframe mount and the new one wasn't catching any threads. they are oem mounts. The bolt should thread no issue. Any tips or ideas?

@brandonpena3516 Жыл бұрын

Dog bone mount bushing **

@TrevorCazes 2 жыл бұрын

did yall try it with just the upper and lower inserts? im wondering if the rubber isolator and spherical bushing on the 034 dogbone actually reduce some nvh that is introduced when using the stock DB

@HumbleMechanic 2 жыл бұрын

That’s what I’m now running. Still some NVH but not as much as the whole bone

@vwgti8091 2 жыл бұрын

Great videos @humblemechanic! Very informative. I have a 16 gti just went stage 2,dp,cai,turbo inlet and muffler delete gonna do intercooler soon. I noticed after getting the parts on and the tune done there's a weird click that sounds like it's coming from under the car in the middle maybe towards the engine more if that makes sense when accelerating or letting off the gas. Any idea what it could be? Or have you ever heard of anything like this before? It didn't make this noise before this. Could it be the stock pendulum is bad?

@dominicanstig5196 7 ай бұрын

Hey man I own a 23" GTI and I’m also getting this weird clicking noise when engaging a gear or just sitting still with the clutch out. Did you ever find out what this noise was? Thanks

@vwgti8091 7 ай бұрын

@dominicanstig5196 ya unfortunately the two bolts on the aftermarket downpipe came out somehow. Stupid I know but I went and got new bolts and it's been fine ever since. The bolts under the car that connect it to the sub frame. Hope that helps. Not sure if it's the same sound or same setup.

@dominicanstig5196 7 ай бұрын

@@vwgti8091 Yeah mine in completely stock and about a week ago the car started to do a subtle but annoying clicking noise intermittently when going into gear or just sitting in neutral. Might just do a bolt check to see if that fixes the issue. Most MK8's have this same issue so I’m not too worried.

@vwgti8091 7 ай бұрын

@dominicanstig5196 ah ok. Ya I don't know much about mk8. I honestly don't even drive mine all that much anymore. Let me know what you find if you remember. Good luck!

@dominicanstig5196 7 ай бұрын

@@vwgti8091 Will do, thanks for the info!

@busslayer4790 2 жыл бұрын

Are there options beside 034 mount that are good? They seem to be out of stock at the moment.

@jameshaulenbeek5931 2 жыл бұрын

BFI has an insert as well.

@PennerPrintsMedia 2 жыл бұрын

I know this video has been up for a while, but any update on the upgrades? How is your satisfaction with these after driving for a while? Looking to do this to my stage 2 R but not sure if the additional vibrations will out-way any benefit for daily hooning.

@HumbleMechanic 2 жыл бұрын

I took the arm out and installed the OEM one. Left the insert only. That seems to be a great compromise

@dominicanstig5196 7 ай бұрын

@@HumbleMechanic I have a 23" GTI and I’m looking at stiffening the shifting without introducing crazy NVH or ruining daily drivability. How do the upper and lower dog bone mounts feel after a year? I’m not really into track driving, just spirited back roads.

@autosport3081 2 жыл бұрын

Do you recommend this upgrade for cars with diesel engine+DSG,like the Passat B7?

@guku4163 Жыл бұрын

I installed 034 upper and lower on my mk7 tdi at 1K it was SO LOUD like a subwoofer vibrating the whole car. It has quieted down a little after around 200 miles, but still very audible.

@forgottenknowledge8917 6 ай бұрын

Mime is stock on an 07 Caddy and she's sweet

@Jaco2k 2 жыл бұрын

Is that pendulum mount/arm the same as the mk7 too? When I sold my car I kept it and if it fits, it surely spares me some money ;)

@HumbleMechanic 2 жыл бұрын

Yep same!!! Just be sure to get the right variant

@clifbradley 2 жыл бұрын

What I like to do is get one of my 15 year old son's socks from underneath his bed, and then I just put that under there. Yes sir. Nothing is as stiff as that and with a little JB Weld, it stays pretty good in there. Plus that way, it feels like I got all my little grandbabies in the car with me! (I only imagine Charles's face as he read that comment and going 'Ohhhh gross. Hopefully you wore gloves'. I mean it's not our usual Star Wars talk, but at least you laughed)

@jameshaulenbeek5931 2 жыл бұрын

🤣🤣🤣

@HumbleMechanic 2 жыл бұрын

Hahaha gross. Also accurate

@Aleks_Mechanics 2 жыл бұрын

notification squad, Have a nice weekend!🔥🔥🔥

@matthewguerra5410 2 жыл бұрын

I see VW went and used an Aluminum subframe finally of the Golf R looks like the Audi S3 subframe

@HumbleMechanic 2 жыл бұрын

Yep!

@JavierGomez-lh8uj 2 жыл бұрын

Does stiffening up the car cause any negative effect in terms of more NVH being taken on?

@HumbleMechanic 2 жыл бұрын

Adds NVH. Mostly noticeable on deceleration and first take off

@masterv2118 2 жыл бұрын

Will the insert over time wear the mount and cause premature replacement? Because nobody likes to be premature..

@HumbleMechanic 2 жыл бұрын

I’d assume not. It will Move less than without

@spinnetti 2 жыл бұрын

don't forget the motor mounts.. They really help take the slop out. With all the various bushings and mounts done, there's like zero driveline lash, but NVH is still low.

@davidrelyea6284 2 жыл бұрын

I'm not the only one that struggles to do the final turn on some of these tty bolts. It can be ridiculously hard. I would never suggest doing with old bolts.

@scoob66 2 жыл бұрын

lol def not with old hardware

@myshots101 2 жыл бұрын

I've been fixing an mk5 and my torque with these things is good and tight since they seem to want that stupid 90 degrees. Dumbest thing I've seen instead of just sticking to a number and be done with that like other manufacturers. Engine hasn't fallen off yet and I did put in two new upper mounts with the same bolts. That bottom frame bushing looks like a pita since you probably have to take it all down just to change those.

@scoob66 2 жыл бұрын

@myshots101 I mean other manufacturers do use them, it just varies, but they're actual tested numbers still, it's where the bolt provides the most clamping force from its stretch while still retaining strength and not snapping

@scoob66 2 жыл бұрын

You don't usually wanna do the angle torque with the old hardware, though, as it's already been stretched to that maximum clamping force and it distorts the bolt, so doing it again could break it

@StockDC2 5 ай бұрын

Hello! I realize that this video is for MK8s but I was just wondering, if I wanted to replace my timing chain and tensioner on an MK6, would I need to remove my upgraded pendulum mount? Thanks in advance!

@HumbleMechanic 5 ай бұрын

IT will make moving the engine easier. Id pop the 2 16mm bolts out,

@StockDC2 5 ай бұрын

@@HumbleMechanic Thanks so much for the reply! I'll remove the 2 bolts!

@Guillermoherrera22 2 жыл бұрын

I put this exact kit on my gti mk7.5 and it felt miserable to drive! It rattle insanely hard. I took it out and it was Pleasant to drive again, what did I do wrong? I torqued all and put new hardware to.

@HumbleMechanic 2 жыл бұрын

You didn’t do anything wrong(most likely) this part will introduce more vibration. When you stiffen up, that almost always adds vibration in the cabin.

@Guillermoherrera22 2 жыл бұрын

@@HumbleMechanic hey thanks for answering! But it introduced allot of vibrations like bolts n stuff in the cabin got loose 🥺😓

@chrismay9930 Жыл бұрын

Question, I have a manual MK5 GTI. I think the dogbone bushing is bad but I'm unsure. When I leave it in gear and decelerate something knocks pretty hard and it is speed sensitive. The faster I'm going the faster the knocks and visa versa. It sounds and feels like it's coming from that area but how can I be sure that's it without dropping a ton of money into it as I am currently short on cash?

@HumbleMechanic Жыл бұрын

I’d start with a visual inspection

@chrismay9930 Жыл бұрын

@@HumbleMechanic I checked everything I could see. Motor mounts, axles, tie rods, ect. I have a polyurethane dogbone insert already however I think the insert is old and split. So if the insert was taking most of the force because the bushing was bad and now the insert is bad. I think that might cause the noise I'm getting.

@obaisadayo6145 8 ай бұрын

How would this mod effect an automatic MK8 GTI? I do time attack and want to do some mods that help my times

@HumbleMechanic 8 ай бұрын

Better traction is what most say.

@nicholasvonrhine6311 Жыл бұрын

Balance over rigidity with these upgrades.

@storm_iq 5 ай бұрын

بالعراق نسميها دچة الكير او دكة الجير 😅اختلاف ثقافات

@eden4949 Жыл бұрын

I own a diesel and got a PU bushing from powerflex as I don't want too much vibration. Will report

@nhlanhlaradebe8 2 жыл бұрын

Yeah, notifications squad. 🇿🇦

@richarddean9306 2 жыл бұрын

So what are you gonna go with on your car?

@HumbleMechanic 2 жыл бұрын

I played around with it. I have the 2 inserts in now. That’s probably what I’m going to stay with. Now if I have a track day, I may swap the whole mount back

@shamirdaya 2 жыл бұрын

Love the vids. Waiting to see if the ECU can be unlocked for tuning.

@HumbleMechanic 2 жыл бұрын

I’m guessing it’s a ways out still 🥲

@pnwgentleman 2 жыл бұрын

The order is: insert, stage 1, break factory dogbone, new dogbone.

@ChocolateFrog 2 жыл бұрын

130Nm + 90 degrees seems like a lot for an engine mount.

@jameshaulenbeek5931 2 жыл бұрын

Considering it's THE bolt holding all of that in place, nah... That's a helluva torque spec though!

@brianswille 2 жыл бұрын

Ohhh Feww I thought I saw an ECS logo 034 Makes sweet stuff, like my mounts from them. F#$% ECS.

@goodeffects1503 2 жыл бұрын

Is 034 a sponsor?

@jameshaulenbeek5931 2 жыл бұрын

I don't think so...? Maybe. They sent him a bunch of Mk 7/7.5 parts to test for fitment on the Mk 8 platform.

@HumbleMechanic 2 жыл бұрын

Kinda. They asked me to see what mk7 stuff fits my mk8. So we are working through their stuff. 034 has been good friends of the show over the last few years

@jamesk3565 2 жыл бұрын

If you are not worried about nvh just weld it 🤣

@HumbleMechanic 2 жыл бұрын

Lol that would feel awful 😂😂😂

@shimon2476 2 жыл бұрын

The 90deg after the initial torque is not needed nor is it worth it!

@HumbleMechanic 2 жыл бұрын

Follow the repair manual

@shimon2476 2 жыл бұрын

@@HumbleMechanic the risk you take of stripping a bolt in the case of the gearbox or stripping the upper subframe mount is not worth it been there already.