Hummer h3 passlock replacement

Рет қаралды 51,964

8 жыл бұрын

After a $40 from rockauto no more being stranded for 10 mins until my car realizes I'm not trying to steal it. Thanks for watching

Пікірлер: 36

@aandrijeski 4 жыл бұрын

Thanks, I have had my passlock change out three times by the dealer. Once under warranty and twice I had to pay. I just change it myself using your instructions. Worked great.

@saranaccamper547 7 жыл бұрын

This works great, simple and relatively cheap, $50 in Connecticut stores.Over a year now with no problems. Found this video shortly after it was uploaded. Other videos had complicated and expensive modifications.Thanks Kyle.

@ThePete67312866 6 жыл бұрын

Just installed the sensor on my 2007 H3.... Did it the same way as the video (Sensor only). Worked like a charm..... The hardest part was getting the plastic off the was around the steering column! I will report back in a few weeks to let you know if the issues has stopped! Thanks for the helpful video!

@denisereier4733 6 жыл бұрын

I ordered the new part and was able to install it successfully in about 15 minutes, plus the 30 minute process to rest the passcode. Thank you for the video post, Kyle! It was perfect and I'm not mechanically inclined at all. Big help!!!!

@AndresE678 5 жыл бұрын

Thanks, your video helped me through my "watch as i fix" sensor swap. problem solved.

@spits55 6 жыл бұрын

Man! this worked perfect for my H3! I followed what you did and fixed my problem, thank you so much,!

@kylerichard3342 6 жыл бұрын

Max G. Anytime man. I need to get around posting my videos about my new exhaust and air cleaner.

@phillbert801 7 жыл бұрын

Worked like a charm. Thanks for the video

@chrisberner4625 7 жыл бұрын

2006 Hummer h3 owner with 150,000 miles and have been having the 10 minute thing going on for awhile now so I bought the passlock replacement at the auto parts store and did not want to screw things up so I called a locksmith to take the new electrical part off the new product I bought and put it on my existing housing just like you did in this video and he went through the programing of the key which took 30 minutes and then the car started and now I am a week after and car has not acted up yet. My fingers are crossed...Chris Berner

@kylerichard3342 7 жыл бұрын

It's been over a year for me and haven't had a problem since then. Hope the same happens for you!

@chrisberner4625 7 жыл бұрын

thank you for the comment. i shall see what happens. Next repair is the Sunroof leak problem.

@kylerichard3342 7 жыл бұрын

It's a somewhat simple fix it's the drain lines that go through the firewall. Try spraying simple green down the holes towards the front of the vehicle. If that doesn't work then you need to clean the lines by hand.

@chrisberner4625 7 жыл бұрын

thanks kyle

@jayd2835 7 жыл бұрын

tumb up becauae you reminded me of the reset progress wish help on my sitiation lol but should of showed how you removed part A to put part B

@ccjcadventures2661 5 жыл бұрын

I am installing one tomorrow . I have tried the tricks that seemed to work for a while like cleaning the passlock and flipping the key and releasing as suggested by some. Wife wont drive it as she has even had a double 10 min wait and it is cold even here in GA. Prices must have skyrocketed since your fix now it is ~58 bux for the part. automatic trans. version.

@ccjcadventures2661 5 жыл бұрын

and thanks for the vid!!!!

@arebonbali2089 8 жыл бұрын

never had this issue till I replaced the radio. 3 weeks ago my H3 just start acting funny with this passlock code which is annoying me so bad. the way i do it, turning on and wait 30 scnd, and off. wait 5 scnd and turning on again and wait 10 scnd and start....Will fired up right way...l would like to find out better way to fixed instead changing the ignition switch. ..I will do the same way like you do above but I don't have mechanical knowledge unless I have to pay dealership which is redicules a lot of money...thanks for the video.

@mikeb5607 7 ай бұрын

When you reinstall the new sensor back into the housing ... does the key need to be in the run or off position?

@kylerichard3342 8 жыл бұрын

Yes after replacing with new passlock you will need to reprogram the system if I can find the instructions will post a link

@howie2206 8 жыл бұрын

If the vehicle was shut off after a normal start do I have to program the sensor after I replace it? My problem has been every so many starts the passlock makes me wait 10 minutes to start. Once started the lock light turns off. So back to my question, If I shut the vehicle off on a normal cycle do I need to program the sensor?

@harrybyerly7015 6 жыл бұрын

the passlock light is not on my dash when the key is in run position

@nassirhussein9438 5 жыл бұрын

Hey guys, so I changed the sensor... it worked. But then the light came back and it's happening again. Should I change the rest of the assembly? Or get a key cylinder?

@r.leepanderjr.6308 Жыл бұрын

That's the ignition switch. The passlock switch is on the other side.

@CyberMachine 8 жыл бұрын

I swear the Hummer has so many useless features that end up broken and expensive

@dmayfield1977 6 жыл бұрын

So true. Like the tire sensors that are always going bad.

@nanogear164 5 жыл бұрын

Ir really works!!

@goodjob8839 3 жыл бұрын

Can someone please help me I have the key in the ignition the red light is on in waiting ten min still no start

@denisereier4733 6 жыл бұрын

Did you have to replace the key at all or will it recognize the original one that came with your H3? Sorry if it's s stupid question. I'm gonna try and fix it myself.

@kylerichard3342 6 жыл бұрын

It will recognize the original key but you have to go through a process. I'll try and find a link for it.

@denisereier4733 6 жыл бұрын

Thanks. I've gone through the process before so I've got it. Thanks for your quick reply!

@denisereier4733 6 жыл бұрын

posting for others benefit.... 30-MINUTE LEARN PROCEDURE after passlock replacement Turn ON the ignition, with the engine OFF. Attempt to start the engine, then release the key to ON, vehicle will not start. Observe the SECURITY Light telltale. After approximately 10 minutes , the telltale will turn OFF. Turn OFF the ignition, and wait 5 seconds . Repeat steps 1 through 4 two more times for a total of 3 cycles/30 minutes . The vehicle is now ready to relearn the Passlock Sensor Data Code and/or passwords on the next ignition switch transition from OFF to CRANK. The vehicle has now learned the Passlock Sensor Data Code and/or password. IMPORTANT: The vehicle learns the Passlock(TM) Sensor Data Code and/or password XXXXX the next ignition switch transition from OFF to CRANK. NOTE: You must turn the ignition OFF before attempting to start the vehicle. Start the engine. With a scan tool, clear any DTCs if needed. History DTCs will self clear after 100 ignition cycles.

@ryantearoach 7 жыл бұрын

So have you had any more 10 minute issues since you replaced the part???

@kylerichard3342 7 жыл бұрын

No more issues and it's been almost a year.

@algonzalez482 7 жыл бұрын

how did u know it was bad

@artishuk 2 жыл бұрын

Mine would lock up and wouldn’t even crank till u do the procedure it started with 10 min then got worse to 3 x 10 min procedure and it got so bad I’d get stuck on parking lot for 30 min too many times so I found info on internet and cut a wire to disengage for good ,now I’m good

@edwinvazquez3936 2 күн бұрын

what wire did you disconnect. I want to do that too. I really hate this passlock