Hunter ACC2 Basic Programming
Рет қаралды 15,963
2 жыл бұрынMike Madewell of Hunter Industries goes over how to setup the basic programming features of run time, days to water and start times among other functions in the Hunter ACC2 irrigation controller. This video contains hands-on demonstration to guide users through the menus to each location that must be configured.
@ErikJG 2 жыл бұрын
My favorite 2 wire clock. I still have lots to learn In using the clock to it full potential. Good job
@shannonrogers6389 2 жыл бұрын
Excellent! Thank you!
@1chabot1 Жыл бұрын
I like how you can program the zone numbers out of order. I find that when I take over maintenance of a two wire system, the decoders are never in order in the field.
@krishnamohanak6528 2 жыл бұрын
How to set station limits i need run 2 station at a time please share the videos
@susantsahoo1398 2 жыл бұрын
How to setup in ACC2, for two stations to run simultaneously?
@huntersocal7059 2 жыл бұрын
Hi Susant, you will want to check out the feature on the ACC2 called station blocks, here is a link to the support page specifically on blocks, tinyurl.com/tfk99z87
@stealthfirefishing 3 ай бұрын
When installing a new clock with the same system, do you have to decode all your decoders to the new Clock as well?
@joshuastewart736 3 ай бұрын
No i highly doubt it, or the ICD-HP would become obsolete with this timer. Which would be a huge kick in the balls for contractors everywhere.
@stealthfirefishing 3 ай бұрын
@@joshuastewart736 thank you for the reply I did install this clock still learning what this timer can do
@0mostafa Жыл бұрын
Manuel???
@angelmoyano7172 2 жыл бұрын
para escuchar en español
@user-ej1bx1hh2z 11 ай бұрын
👍
Hunter Industries ResCom, and Golf Irrigation
Рет қаралды 143 М.
Irrigation plus
Рет қаралды 2,9 М.
Hunter Industries ResCom, and Golf Irrigation
Рет қаралды 35 М.
Hunter Industries ResCom, and Golf Irrigation
Рет қаралды 85 М.