Hunter Fan Remote Pairing With No Pair Button & No Dip Switches

Hunter Fan Remote Pairing With No Pair Button & No Dip Switches - Part 3

Рет қаралды 33,600

Жыл бұрын

imintodecor.com/how-to-pair-h...
In this video we show you how to pair a Hunter Fan Remote that has no pair button and no dip switches. It's easier than you think and requires very little time and effort.
You can find a detailed step by step guide of this process on our website:
Website: imintodecor.com/how-to-pair-h...
Be sure to check out our other videos on Hunter Fan Remote Pairing:
Hunter Fan Remote Pairing Part 1 : • Hunter Fan Remote Pair...
Hunter Fan Remote Pairing Part 2 : • Hunter Fan Remote Pair...
Be sure to Like and Subscribe To our Channel: ‪@imintodecor‬
Original Videos:
1st Video: • How to Fix Hunter Fan ...
2nd Video: • How to Install a Ceili...
#ceilingfan #itsahunter #remotecontrol

Пікірлер: 21

@mattludwick1233 2 ай бұрын

After three months of troubleshooting, I almost broke down and bought a new fan. Somehow I found this video today. Needless to say, it fixed three issues and it saved me money! Thank you so much for the video!

@mrstoner2udude799 9 ай бұрын

OMG, it worked! Thank you so much!! My Hunter fan was not working at all after I sat on the remote a few months ago. I cut the breaker off. turned the wall switch on, held the 0-3 button for five seconds...and now it works!

@jiajung2882 2 ай бұрын

Thank you so much. After running up and down stairs for breaker box 3times, it finally works!!!!!

@JMR396 11 күн бұрын

Excellent video. Right to the point and definitely fixed my problem. Thank you very much.

@k8annescott Ай бұрын

Thank you! Anyone inpatient, skip to 2:20 Turn fan switch off at the wall then flip it on Then hold “0” and “3” button for a few seconds. The light above the “2” will flash, showing that it’s paired! It took longer to write this than it did to pair my fan. Thank you guys soooo much! You saved me so much headache

@kajutisg 7 ай бұрын

Thank you VERY much. We have 3 identical Hunter fans in our house, & somehow today my wife managed to confuse 2 of the remotes, by trying 1 in a room with a different fan. Reset the remotes by pulling their batteries for several seconds (1 of the remotes had the blue LED locked on). Then, one at a time, powered off a fan using the wall swich, then powered on with zero & three buttons pressed for about 4 seconds. Worked!

@Ayeshe22 10 ай бұрын

This completely worked for my fan (model 52006). Thank you so much for the video! I spent hours trying to figure out my fan remote but couldn't find any definitive info. It almost cost me my marriage.

@imintodecor 9 ай бұрын

Great to hear!

@raghupushpagiri5383 2 ай бұрын

Thank you very much.really worked pressing 0 and 3 at the same time and holding for 4-5 seconds

@dennishussey2217 8 ай бұрын

Model 59242, we think we did this procedure while also checking every single wire connection twice. This is a great help, and thanks. PS, go to 1:20 to see the fix (pairing the fan 12 times to match frequencies). I have no idea why this isn't in the manual.

@yanxia2028 5 ай бұрын

i have exactly the same problem and this video helps fix the problem. Thanks!

@ruthadams2413 2 ай бұрын

I started to follow your directions and the fan came back on right after I turned the power back on. Thanks for your suggestions

@imintodecor 2 ай бұрын

Great to hear!

@dannyp4424 4 ай бұрын

Live saver 💪🏼💪🏼

@Rhonda-eb9lc 5 ай бұрын

I must have an older fan. I don’t have any pull chains for either the fam or the light. I turn it on at the wall switch and operate it with a small oval shaped remote. Has a light a fan and up or down.

@davidyates8071 10 ай бұрын

Trying to limit remote to just work with 1 fan rather than 2. By repeating pairing 12 times to clear memory and limit remote to just be paired with one fan .. does power have to be cut to fan 12 times for pairing ? (or just press 0+3 twelve times )? Tried just pressing 0+3 twelve times to pair but remote still operates fan in other room too.

@imintodecor 9 ай бұрын

Sorry to hear this. You might want to also goto the suggested website in the description. There is more information contained in the article.

@mrstoner2udude799 9 ай бұрын

I wondered the same thing. I don't have a 2nd fan involved. Just one fan. I sat on my remote for 30 minutes and now nothing works. No reset button on receiver

@imintodecor Жыл бұрын

Visit imintodecor.com/how-to-pair-hunter-fan-remote-programming-pairing/ for the full guide on our website

@satindoll210 Ай бұрын

This worked the first time and not since. Turned the breaker off and on several times. How many times do you have to do it?