That cat was was listening to every thing you were talking about. The leadburn logger Scotland

I really appreciate all the info an stories. An doing that for our buddy Buckin is mighty nice. Im sure you always give us your best.. THX

THANKS FOR THE TIPS IRONHORSE I LOVE INFO KNOWLEDGE OF ALL THIS IS GREAT THANKS BUDDY LOOKING FORWARD TO ALL YOUR FUTURE BUILDS

Great Information There !!! Thank You For Your Videos !!!

Thank you for all the insight

Love ya man! Spring,Summer,Winter or Fall!!! I’m in South Eastern Pa... I’d definitely love to let the 6.0 stroke her way North! I’d bring a DirtBoyDave build up to cut a round. I’d love to just hang out and enjoy the stories and gain knowledge from older guys who have this passion too... and lot’s more years and knowledge than me. Camping out and eating some food..,listening to good folks make music and memories together in the woods...talking PowerSaw’s! Boy O’ Boy! Sipping my Iced Tea and doing lots of smiling... I wanna find another machine shop to knock down a 272 piston to play with in my aftermarket bigbore....! My Hutzl 372 has a Sugi 28” skipper on her...LOL! I saved so much on the China Saw I could afford a decent bar!!!LMFAO! I just love the way you are schooling us guys that want to learn everything we can about PowerSaw’s!!! 😁👍. Thank you,Sir!

Great video Harvey and love the meet and greet idea

You know I'll be there Harvey!! Great video bud.

Great vids you keep it real and explain things in pretty simple terms love the vids keep up the good work be well my friend

thanks for video. lots of good tips thanks!

Harvey-stock 2020 ... music ; saws , dirt bikes and lotsa good eats !!! I should have the x27 head hafted to a hickory handle soon

Hey what’s going on Harvey I don’t build saws I just love hanging out with ya hahaha have a great day...👍👍👍👍❤️❤️❤️❤️☮️

sorry im late iron horse i make sure i watch your vid right off the bat you and bucking keep up the great work

I’m excited to see some 61 action it’s gonna be awesome 👍

Great tips! Thanks 👍👍👍👍👍👍👍👍

I tell ya, I think their may be 2 people in this community that live near me. I'm about as far as I can get from you without getting in the Pacific ocean.. 😊👊👍Great video Harvey!!!!

Thanks harv , great info

Harvey love all the knowledge you share with us. It’s so worthy to get free knowledge keep on keeping on

sounds good Mr. Harvey I'm sure you will get a lot of responces

great info thanks harv

I live 3 hrs SE of you in pa. I'd be willing to take a drive. Love the channel. New sub.

New sub here Ironhorse🖐 Been watching Buckin and Killinger channels for a little while, and found my way here. Appreciate your explanation of how your building saws, your comment on another video if I remember correctly was to think of it as basically hot rodding a dirt bike helped me understand better. I've never done more than general maintenance type stuff and carb rebuilding on a saw, so thanks for sharing your knowledge👍Will be trying to catch up on some past videos and following new ones👌✌

Hello Harv from the Ireland crew, if decide on a date, I'll come over, Eoin P

September 20th that's my birthday and it's going to be at decals again this year.. I heard pretty clothes is going to be in Michigan and then I heard that supposed to be in Indiana somebody has to make up my mind and I'm not going to come over your house for two days I'm going to stay there for like a week put my little army cot right next to that wood stove at night time I'm a Marine I seen heat I seen cold.lol. thanks for the videos mr. Harvey you're a hell of a man you give us more information than half the people out there from a Michigan boy over and out good day

Sure that will be great I'll start saving my hilton points..The 394 big bore is going out for a run today.

Hey Harvey, not sure where your located but I'm from western Pa and would travel 3-4 hours in a heartbeat! Keep up the great content.

this video has great lighting wow

Hi Mr Harvey, I have been watching you for awhile now and this is my first post, but I would love to come up your way I live here in central PA and I could be there in about 2 hours. Someday I have a saw I would be honored to have you build for me!!!

I would love to come hang out for a meet n greet at your farm. Your not that far from Maine lol. That would be very cool.

Very cool mate

Hey Harvey, hows ol Dave holding up? Good stuff buddy, I’m learning a lot from you and your channel!!!

Yes Sir , I would go . I live in N.E. Ohio . DO IT !

Lol I love it

Harvey-stock sounds like fun, I think we're pretty close-ish. Would make the trip, life permitting...

I'm in for it.be an honor. I'm only hour away. Like to make It to buckinstock.b sure come c u Harvey.you 've done great with the channel.

I’m all in for your doings. I would like to meet you in person.

I used to have arrows like that on my uniform when I worked for the government 😜

Hey harvey id come 2 ur event absolutely would i live in knoxville tn i work for myself so time off isn't an issue just need the date to be ther. I appreciate what you do man. I really do.

Hi Harv, I live in SE Pennsylvania. I’d really like to meet up and see your place. Timing is not always on my side having 2 young kids. We’ll see how it goes. Keep us informed.

Intake side is the coolest side on a 2 stroke. usually why the pins are there.

I would love to take a ride up your way...l live about 2 hours from you and l also an old David Bradley chain saw that was in an old barn that was being tore down on a job that I was logging .....it was completely seized up from sitting for the last 30 40 years....l now have it freed up, cleaned up and about ready to start and it has very good compression .....l don't know anything about the carburetor on that saw .... I was wondering if you ever did anything with one .

I'll be there, depending on schedule!

Hey Harvey while you're making videos that calico cat is over there inspecting your work on the workbench.

Great video man always like to hear more info. i would try to to make it where do you live state i'm in MA but can't drive do to some heath stuff .

I'm from New York would be a good idea.

Hey Harvey...would love to come up...we are in Southern Missouri and it would be a haul but would shift things around to to come be a part of the Ironhorse saw-a-palooza and run some saws get square filling tips and watch the draft horses pull. Thanks great idea...would be glad to help in anyway I can

Id be interested in Ironstock.

Harvey, sent you an email on Sunday along the lines of getting together haven’t heard back. About 5 hours away would enjoy the drive.

😊😊😊👍👍 cool

Its 11.5hr from me 2 ur town id make that trip to get to meet u an talk to you absolutely.

hey Harvey can we get an update on the grabber family sometime please.

Hello, I'm from Serbia. I have a question? What do you think about combining a Hyway big bore cylinder 372 with a Wiseco piston?

Ironstock 2020!

I would be up for a meet up in NY.

Hey Harvey. Do you remember me with my Partner 660? Could you explain, if it's possible to set up this big bore kit from husky 272 /372 for this partner chainsaw. All so I hope it fits. Thanks

So could you use the 272 piston in the 372 without milling anything off the top of the piston and still be safe with squish? With or without a base gasket? Didnt understand that part. Love the tips and tricks Harvey!! Thank you for sharing with us

Sounds like fun let's make this happen !!!!!!!🌭🌭🌭🌭🌭🍔🍔🍔🍔

I think it would be great to have a get together

Great video. Gonna make it to Buckin stock, would love to come your way sometime. 👍✊

Meteor kit is good for 372xp ? is 1 ring.

October

Hey Harvey would love to get together with you . Central Mass here so not to far a drive . Planning on making it to Bucking stock this year it’s already on the calendar ..

Is it possible to run a single ring on a double ring piston?? Like the lil red barn 50mm pop up double ring on a 371xp stock cylinder with gasket?? Or simply better to go with meteor with gasket delete??

What would happen if I take some off the roof of the intake port instead of the floor? Say 0.040” I’d get more intake duration but wouldn’t have it close too late so I’d get nice case pressure is my thinking..

I would like to come up to your place. I'm in Pennsylvania

Ya upstate New York get together 👍👍👍👍👍

👍

and how much for piston already done with rings from you bud

Great advice man, I'm working on my 385, exhuast opens at 96 intake opens at 103 and my blowdown is 36 putting my tranfer duration at 96. Seems low. My question is should I raise the transfers in this case? I'm thinking of 26 blowdown for a 116 transfer duration. What's your thoughts thanks.

I could show off my new S-25DA hotsaw? ;)

Harv i live in newyork on the pa border matamoras would love to meat you.

hey ironhorse I'm fellow timber cutter from Murphy North Carolina. Can u put a stock 272 piston in a 372xpw without milling it down. thank ya bud b safe

Newer sub here. Where is Ironhorse located?

? Can any 2 ring piston,just run 1 ring.

how would I go about getting in contact with you to discuss having some work done on saw or two (if you are interested)

What do you think of the Meteor Cylinders? Got one in my cart at Wolfcreek for my 272xp.

Im on the other side of the world and i feel like droping by

what r you thinking the cat is on the bench lol ///A 272 with a bit of work be a good saw

All i know is you live in new york but not where .i live in southern new Hampshire so maybee do able.

1st😬❤️👍

How far from N.C. are you?

ok mill to same height as 372xpw

Upstate ny we’re that’s we’re i am