Husqvarna 136 Chainsaw Arrives In A Bucket.

Рет қаралды 1,634

Ай бұрын

Is it a bucket saw or a saw in a bucket? This Husqvarna 136 chainsaw showed up in pieces with no explanation why it was disassembled. Can we get it running again or will it leave in the same trash can? #smallenginerepair
If you would like to support the channel by purchasing stickers, you can do that here: www.ebay.com/str/thegreasysho...
If you would like to support the channel by purchasing a carburetor stand, you can find them here: www.ebay.com/str/thegreasysho...

Пікірлер: 52

@MuhaloTube Ай бұрын

Basket case fixes are pretty satisfying when they work out. Nice job. 👍

@TheGreasyShopRag Ай бұрын

Thanks for watching!

@drmikeyb1 Ай бұрын

Another great video Scott, thank you for your time brother. Take care

@TheGreasyShopRag Ай бұрын

And thank you for your time. Later.

@queenstownkid Ай бұрын

im great at disassembly too....now wheres my garbage can

@TheGreasyShopRag Ай бұрын

Lol!

@lsxobs3709 28 күн бұрын

Great little saws to be homeowner grade.

@TheGreasyShopRag 28 күн бұрын

Agreed. As a home owner saw they are decent.

@woolval52 Ай бұрын

Love that carb tuning by ear! After watching numerous videos doing this I finally caught on and was able to quickly adjust my poor running (due my my poor tuning) Husky to finally running great. Finished the day helping a friend cut up a downed tree, ran beautifully the whole afternoon. I love your videos; straightforward repairs learned from a little experience. LOL, just a little.

@TheGreasyShopRag Ай бұрын

I'm glad to hear the videos are helping. Thanks for watching!

@nickhildabridle1612 Ай бұрын

You just can not beat experience. Excellent video

@TheGreasyShopRag Ай бұрын

Thanks for watching!

@thomasfrost6993 Ай бұрын

After watching many of your videos, I've gotten pretty good at diagnosing and repairing some of the saws I had given to me. I had posted in our local forum that I wanted to learn chainsaw repair and if you had any that you wanted to donate............I have over 20 saws now ranging from Stihl 066 to Husqvarna 272XP down and I mean "down" to the green Poulans. I've done about 6 so far and it's been a lot of fun and very rewarding when one fires up and accepts tuning. Watching your procedures and listening to you explain what your findings are on different saws is well done. Only one saw has ended up in a garbage can so far and it wasn't taken to a repair shop either sorry to say. Just too far gone and not worth the effort. As always, Thanks for Posting!

@TheGreasyShopRag Ай бұрын

I enjoy reading comments like this. Thanks for tuning in!

@RMosher11 Ай бұрын

I've done 2 of the husky 141s. The second one was a none running parts saw from ebay for 40 bucks. It's now my pruning saw. They're a great little saw

@TheGreasyShopRag Ай бұрын

They were built halfway decent and I still see them come through often.

@MrRmh3481 Ай бұрын

Looks like a Poulan!

@chrischiampo7647 Ай бұрын

I’ve Had a Few Of Those “Box” Saws Myself Over The Years 😀😇 Excellent Approach Too Repair and Diagnosis and Reassembly of That Saw 😊👍🏼

@TheGreasyShopRag Ай бұрын

Thanks. Its really not too bad if you've worked on one before. Its the ones you've never seen that can be a challenge.

@MarkOxley-vo3kq Ай бұрын

That was awesome!! Bucket of parts FIX

@TheGreasyShopRag Ай бұрын

Except for the top cover screws it was almost complete.

@1966poker Ай бұрын

They just testing you with the bucket of parts. Got my carb stand last week and getting ready to put it work.

@TheGreasyShopRag Ай бұрын

I hope you find the carb stand useful. Thanks for supporting the channel!

@steventhompson299 Ай бұрын

That bucket of parts brought back memories. I did tax prep back in the day and people would bring in bags of receipts expecting me to go through and organize/tally them up. It didn’t happen lol

@TheGreasyShopRag Ай бұрын

Yikes, I don't blame you.

@wayneberry8703 Ай бұрын

Hahahahahahaha a bucket full of parts, 😂….. Great fix, Scott.

@TheGreasyShopRag Ай бұрын

Thanks. Bonus, they didn't ask for the bucket back 🙂

@wayneberry8703 Ай бұрын

@@TheGreasyShopRag . Hahahahahahaha, how good is that, 😂. Thanks, Scott… Great video buddy.

@rcf8367 Ай бұрын

Another great repair! Were those 36/136 series saws made by Poulan?

@TheGreasyShopRag Ай бұрын

No, newer Poulan are made by Husqvarna.

@PDAUSRC Ай бұрын

Hi there. You have to know the saw well to make one from a bucket of bits. Glad they didn't strip any further! Do you find the loctite placed on the outside of a nut still there when you get them back next time? I always thought loctite threadlocker was anaerobic - won't cure unless deprived of air. It doesn't set in the bottle like sealant. Good idea though to stop nut loosening if it sets up a bit at least. Thx for the videos. Very helpful to the back yarders.

@TheGreasyShopRag Ай бұрын

Yes in fact I didn't show it in the video but I had to take the studs to the wire wheel to remove the old thread locker someone had put on.

@PDAUSRC Ай бұрын

Good to know, thx for the reply. Rgds, Peter

@larrywarner9314 Ай бұрын

Most common problems with those are the little white nipple that goes in the impulse track , and crank seals, plus that all they are is an orange version on the poulan pro or those purple saws 😮

@TheGreasyShopRag Ай бұрын

Every brand has their residential stuff and their pro stuff. This one series saw is made for a home owner so yes its just like the purple ones.

@tedneitzel Ай бұрын

Kinda looks like the cylinders in a couple of my poulan saws! Great job out of bucket of parts!

@TheGreasyShopRag Ай бұрын

Husqvarna owns Poulan so who knows?

@nickflopper Ай бұрын

Why did you put the starter back on missing the center bolt that holds the pulley on? Its gonna rub on the flywheel best case, or completely fly apart worst case

@TheGreasyShopRag Ай бұрын

Because people are playing games sending me saws in a bucket. Can't catch everything. Good job spotting it.

@allenreed1596 Ай бұрын

How about that light you use, were can I find one??

@XxBlindoutxX Ай бұрын

Amazon sells everything

@TheGreasyShopRag Ай бұрын

www.streamlight.com/products/detail/stylus-reach-18

@bretdavisdmd Ай бұрын

How does the carburetor get fuel initially without the purge bulb?

@TheGreasyShopRag Ай бұрын

Crankcase pulses are sent to the fuel pump in the carb. I find it usually takes about ten pulls to run the pump long enough to prime the carb.

@bretdavisdmd Ай бұрын

@@TheGreasyShopRag thanks Scott. Love your videos man.

@jc-d6179 Ай бұрын

Excellent run-through. So sad that a user could be so clueless.

@TheGreasyShopRag Ай бұрын

Ya not sure what they were looking for. Maybe he lost his wallet and wanted to be sure to look everywhere.

@killer2600 22 сағат бұрын

It's common with people that aren't mechanically inclined, they tear everything apart trying to find the obvious broken thing. The logic usually is, it ran great the last time I used it so it has to be something simple, obvious, and easy.