Buy it NOW: flipkeys.in/product/hyundai-i-... For Step by Step instructions, Check: lockbook.in/hyundai-keypad-cha... If you have got Hyundai Flip Key then you can change the keypad for its Flip Key by watching this video...
Пікірлер: 50
@keen24613 жыл бұрын
There are some vids out there with procedures to perform this task, but this video is truly the appropriate way to do it. Maybe I would add, is to put very little soft glue on each one of the 4 holes where the cradle inserts, so you can be sure it will never come off and yet you can perform the same procedure if needed on the future. Thanks for sharing this valuable information.
@user-vo7xu5hc6j5 жыл бұрын
The key-maker said that case could not be repaired, but i watched this video and easily fixed it. Thank u man!
@ChipBreakerGroove5 ай бұрын
... and here I was with a screwdriver trying to fit the rubber keypad over the frame not knowing I could just take the frame out as well. Thanks for saving me a lot of frustration. High five!
@anatolbauer49754 жыл бұрын
Thanks, great tutorial, worked fine ! Important: You have to take care when removing the key pad frame, it easily can get broken - especially when there are remains of the old rubber keypad around it.
@PaulLongva4 жыл бұрын
I just went from, how the heck am I going to do this, to 10 minutes later, 2 key fobs fixed. You, sir, are a legend, many thanks.
@bilalkhalifa69155 жыл бұрын
Good video as worked on my Kia Ceed key without the need to replace whole key which was an expensive route. Saved alot of money. Important to grind down edges as per video
@markwinstone90633 жыл бұрын
thanks for this video. it solved my problem for 2 keys and saved me 100's of pounds as i didn't have to buy new keys. the hack to file the hard plastic frame was a brilliant idea. thank you.
@drluvski3 жыл бұрын
Thanks, I wouldn't have had a clue what to do without this video.
@tanyaeldred3 жыл бұрын
Thank you for this amazing video i was able to change my keypad thanks to this video, the filing of the small tabs on the plastic thing really is crucial else it doesn't go back in. I changed my Xcent keypad.
@tanveerf95789 жыл бұрын
Excellent product from FlipKeys, the key instruction is to rub the pins of the case once you remove it to install the new keypad. Otherwise its difficult to push the kepad case back in. Remember that you don't have to do any new fix to the new keypad. Only the case in the key with 4 pins need slight rubbing. Thanks to FlipKeys.
@sufianosman6924 жыл бұрын
Can i know why did you modify the frame? I think you can put the rubber pad on the frame firmly as you did and click the frame back in place without modifying the plastic frame.
@hmlab10756 жыл бұрын
Terrific instruction. Take care in removing the keypad frame and be VERY patient in filing the pins. Result is a new looking and working fob. I have a Kia Rio. Thank you... saved a bundle $$$.
@humor20104 жыл бұрын
Hey there, Thanks a lot. People like you are making youtube a great source.
@shaanzee45744 жыл бұрын
Thank you for this video it is amazing, I managed to replace my broken lock button thanks to this video. Thank you for creating it and sharing it :)
@rustug_84xxx606 жыл бұрын
Thank you for the good instruction 👍🏼👍🏼👍🏼👍🏼
@michaelschmidt91225 жыл бұрын
Yes, thats it. I didn't file the pins, I took a very small hammer, a little hit on each pin and it fits, Thank you so much, I did save a lot of €€€
@niktodt14 жыл бұрын
Thanks, you just saved me 400 euro I would´ve payed in the dealership to have both my keys fixed.
@perovk9 жыл бұрын
thank you very much for this video! You are the best! :)
@ShayulmerNNF6 жыл бұрын
Thank you, helped a lot!
@carflipkeys12 жыл бұрын
@Ajman C A sure. I will upload 1 on Hyundai Flip Key fitting very soon
@chintandholakiya9 жыл бұрын
thank you, it's helpful
@emrepoliss7 жыл бұрын
Thank you 👍
@internetslob6 жыл бұрын
Thanks very helpful
@billsticker69879 жыл бұрын
I have an I30 in the UK where can I buy this item?
@robertdavis15717 жыл бұрын
Many thanks, This worked for me 👍 Only thing I can add is be careful when removing the cradle .... it's very flimsy otherwise great vid 👍👍 thanks for sharing.😊 Shame on Hyundai for making these key fobs pretty much non repairable unless you know what you're doing.
@celalcitak82356 жыл бұрын
Thank You very much i did it
@MrSumitroy13 жыл бұрын
great product I ordered for my i20 make 2011 registred yr 2012.
@HazzardMods6 жыл бұрын
I did this but I recommend countersinking the holes on the key as well.
@revowild12 жыл бұрын
were can i buy one of those Hyundai flip keys?
@ajman5212 жыл бұрын
Thanks Buddy
@KevsGuide5 жыл бұрын
excellent
@MHS_ART6 жыл бұрын
Worked for me
@carflipkeys6 жыл бұрын
+Michael Struss Good to know. 👌
@happylucky86496 жыл бұрын
Sir apache rtr180 bike me flip key install ki video banao
@carflipkeys12 жыл бұрын
If you are from India, then you may also buy this from us I have put a link for it in Video description
@serbermor9 жыл бұрын
Any way to ship it to Costa Rica?
@carflipkeys9 жыл бұрын
Sorry for late reply I feel you should find that keypad locally I enquires locally and courier alone will cost by EMS about $18 plus cost of keypad $4
@kieranjdoherty32933 жыл бұрын
Thankyou,👍
@gmpatil294 жыл бұрын
Thanks
@ydeardorff10 жыл бұрын
can you convert the no flip key to a flip key?
@carflipkeys10 жыл бұрын
Yes we can convert most of non Flip Key to a Flip Key
@vinodsavadi8 жыл бұрын
whhr can i get ur service in INDIA??
@carflipkeys8 жыл бұрын
+Vinod Savadi visit us at www.flipkeys.in
@carflipkeys11 жыл бұрын
It uses ID 46 Chip....
@neethujacob13806 жыл бұрын
Flip Keys
@ajman5212 жыл бұрын
Can u do videon on how to change the whole flip remote cover ....
@bryceaylwar.d26987 жыл бұрын
hi
@carflipkeys7 жыл бұрын
+Bryce Aylward hello from www.flipkeys.in
@nickcruze60215 жыл бұрын
They a lot easier way
@ankitgoyal667812 жыл бұрын
get the same one from ebay international at rs 600 including shipping