The trick of just chucking the cage in and bending the tabs, golden! Cheers mate!

This video really was a life saver. I initially forgot to also unclamp the cables themselves From the black bearings after taking off the loops. But when I finally did it the head unit came out easily :) Thanks again! So much fiddeling for a car stereo...

Thanks bro this is super helpful your right it is a tricky process compared to other cars

Thankyou so much! Great video, clearly presented. Enabled me to do this easily!

Thankyou... You made the job so much easier 👍

My partner cracked up immediately the moment you said “we’re about to do a head unit in one of the most deceiving cars” ahhh the perks of having a Hyundai Getz hahaha!

Thanks a lot for this video, it was super helpful 👍

Wish I found this video like 5 months ago. Was scratching my head trying to remove the facia panel. It was kind of loose. Now I know how to remove it and see if there are any issues. I unscrewed that mechanism on the right, nearly broke my neck and arms trying to get it back in. 😬 Edit: I cool it's Right hand drive as well.

Thanks a lot man. Great help

Thanks for this! I was really struggling to figure it all out 😓

Hi there. Thanks for the video. My mom also have the same vehicle and I need to remove the radio in order to clean it inside. I have been using a cd cleaner but did not quite helped. I am planning to open the radio and clean thoroughly. Regards 😃

Very helpful video, thank you

Thanks - that cage was flummoxing me! Very helpful video, and no unnecessary waffle.

nice video bro.i thought youre gonna remove the fascia...thats what i want to watch the next tym.im tryin to repaint the plastics inside the car.

Very good explained...👏👏👏👍👍

Just fantastic

How would you get the steering wheel controls to work? I heard the Axess SWC is the right one to use for the classic three wire analog controls but not too sure.

Epic. Thanks mate.

I'll Just Follow Same Procedure By Uncliping The 3 Clips. I just Need To Replace The 2 Air Vents. Will This Be Fine?

thanks a lot, I wish I would've seen this earlier, my stupid mechanic ended up cutting the fascia to remove the inner cage

Just put a new one in. This certainly made things easier. Glad I bought an adaptor wiring harness as well as the new stereo, just plug and play and worked first time much to my astonishment, that hardly ever happens

Hey bro, I got a pioneer DEH single din for my getz, but no audio is going through at all. Also tried back onto the factory audio as well, I'm not sure what I did to get no sound on either one now. I also hard-wired just as you did in the video. Could you give a lad some help? Cheers mate.

Can you please show me in a video about how to connect SW control.. I have absolutely no idea. tried couple of time but failed. can you please make a short. video on any social media. i will follow

Hi where can I buy the harness adaptor for my getz

From what i understood all that work was because the original cage right? does that mean that if you were to replace a radio unit that's already not the original one, you won't need to do all that?

Glad I found this, I'm about to fit an amp, som components and a sub to my daughter's getz. It already has an aftermarket head unit but I'm going to have to pull it out and run rca's. Is there an easy way to run an 8 ga power wire through the firewall? I haven't as yet found a grommet to use.

Hi where can i buy it < i cant find it on amazon>. I live in France.

Will the steering wheel button still work?

Can you use the buttons on the steering wheel?

@05:37 I really don't understand, if you use a converter (APP085) cable then why would you need step 2 and do some hard-wiring? Isn't it supposed to connect directy to the Kenwood device?

Anyone had problems with the factory unit sound cutting in and out randomly? I bought a pioneer single din thinking the stock one was on its way out but had no sound at all with the pioneer and I get an amp error message and now no sound at all at all the stock unit 😑

i need a demo for the steering control..

managed to get factory cage out by just removing the glove box cable there is enough room to unscrew and flip the cage up for removal

Hello, thank you for this awesome video! Hopefully I can follow your guidance without any problem. Do you have a recommendation for Getz 2005 budget head unit with bluetooth connection?

How can I install a 2 din radio?

Super helpful thank you. Did you get as far as running a Bluetooth mic in a Getz? What’s the best route to run it? Thank you.

Great video, I was wondering. Can I fit a double din radio in there if I trim the middle piece? I think it could be very exiting to install apple carplay in my Getz from 2008. But I can't figure out if there will be enough space for this, do you know? -Thanks

I couldn't remove the fascia, because I were unable to undo the air duct flap control cable from the knob. I'd had the feeling that I was gonna break something. What's the trick?

Do you know how to pull wires from the battery in to the cabin of the car ? For subwoofer?

Awesome video m8! I just got a Getz 2006 and the radio has no AUX. I know that an AUX/USB can be installed by soldering the cables to the main circuit, do you know how to do that for this specific car? I don't want to spend money in a new head unit, I am planning to use this money on changing the door speakers for better ones (with the proper RMS) for an improved audio experience. I found that the original radio delivers 22 W RMS as many of aftermarket radio systems do, so adding better speakers should be enough to improve the audio quality. Or am I wrong?

Great video, easy to follow. I have the same car and am looking at installing similar head unit but wanting to connect the steering wheel controls, are there wires on the back of the head unit that connect to the wires and plug you didn’t use? ( I’m hoping it’s that easy)

How do you romove the wires from the back of the radio I'm stuck on there

I just unscrewed the clips off the side of the Getz head unit then attached them to the new Sony and clipped it back into the original cage ..

About to do this with my Hyundai Tucson 2009 model. Hopefully the process isn't too dissimilar!

The light has gone from behind my heater controls, is this how you get to the bulb?

Bit late to the party, but great video! How hard would it be to wire in the steering wheel controls to get them working with an aftermarket system?

I am completely new to this sort of thing, just bought my first car and it's a good old Getz 2006. The car has no AUX tho, and I'm not too sure if it's possible to just buy a head unit with aux, and have it work? Or does the car simply not come with the ability to use AUX at all with the stock speakers and such? If that makes any sense haha Great video btw :)

What if i dont have a cage with the one i will replce with.?

Great vid! Was just wondering what the tools you were using called?

good job bro.. what did u do that original radio? i want it for my getz 😉

Hey mate, is there any chance you can do a more in-depth section on the hard wiring? Is the wiring harness necessary? Thanks

Do the steering wheel controls work with that unit

Why not use the mounting clips from the original radio like this bloke suggests? bobparker.net.au/mp3-05g/mp3-05g.htm Is there an advantage to tossing the hyundai factory mounting? Thx

Bro.. Just a question here.. If we have to connect it with steering then how can we do it. I want to connect it to hyundai getz steering but I don't have any idea.

Wow

Ii

I hate this car hope this video helps..😢