Thank you for this video. I just helped my son replace his fuel filter and your video made this very easy for us.

Thanks, I needed this to remind me how to do it! It might be a good idea to put a plastic bag over the turbo inlet so you don't accidentally drop any small tools or screws in it. Just make sure you take it off when ready to fit the air hose back on.

On our 2010 i30 I changed the filter without removing air duct or the entire shroud. Just remove top nuts from the shroud and flex it away from firewall at which point you can remove filter housing bolts and wriggle it out past the intake duct.

Nice video, showing where all the bits are , and how to remove it. The only thing I would say that was missing was showing everyone how to pump the air out of the fuel line by pushing down on black knob on top of the fuel filter casing until the gas spurts out the fuel port, then connecting the orange and blue fuel lines. This video helped with finding it's location in the engine bay and how easy it is to do cheaply. Thank you

Thanks a lot for this guide, I had code 1186 and the engine could not rev higher than 3000rpm. A new fuel filter solved that problem! One thing I will recommend for anyone reading is DO NOT unscrew the clamps on the fuel filter and turbo completely. Leave them threaded like you did here. I unscrewed the first one and lost the bits down the bottom of the engine when I was trying to put it back together.

Thanks for this. I've never worked on a diesel before and was daunted without a service manual. Didn't know where to start or what was involved. This made it a piece of cake!

I changed it today on my car at some workshop here in Sweden, paid almost $200 for this 30 minutes job. Next time I will do it myself.

Great video, clear and concise, i see the other fella still hasn't explained his technique lol

Thanks Khan!!😊

Thanks so much just don't my 1st fuel filter and was a walk in the park because off your video

Obrigado explico tão fácil que mesmo sem intender inglês eu vou trocar o meu

Thank you for your video, very good job!

Thank you for this video, sir. I had failt code P1186 fuel pressure to low, and the car had big problems. Learned and fixed it, thanks to your video.

Simple and easy. Thanks mate.

Thanks mate

Cheers! made the filter change simple...

Good work, though you forgot to pump out the filter of fuel before removing it and filling it up when putting it in.

Very nice video and tutorial. Thank you very much!

Cheers for the video. Nice and simple.

❤ great job brother thank u so much 👍

is this the 1.6 crdi ? It looks not that complicated to do it. Thank you for sharing.

thanks for this video, great job !

Great video thanks for sharing .

well done, thank u

Cracking video mate

very good video, many thanks

Why do manufacturers make regular service items so difficult to get to? The i30 isnt as bad as some. I notice that one of his mounting nuts was missing and one of the fuel lines had a broken retainer clip. Thats what happens when manufacturers mount stuff awkwardly.

Hello. Great video! My car is motorcode: D4FB-L, CRDi 16v, 2011 mod. Is this an engine (motorcode): D4FB-L ? There are filter with 6 holes and 8 holes.

Great vid thanks. Can you show how to change injectors on this please bud?

Excellent Thank you.

Tks man !

Clip broken off on my fuel pipe can I use cable ties?or it will leak?

Just done mine 👍

Bro can you show how to change the heater matrix on this car please. Thank you 😊

is it the same for KIA Ceed?

Does the changing of fuel filter help spent less diesel???

👍🌷

lame, it could be MORE EASY; trust me, i worked on that cars. You did a lot of handeling that where unnecessary