I bought 2 broken Playstation 3 "Fat" with the yellow light of death (YLOD)

I bought 2 broken Playstation 3 "Fat" with the yellow light of death (YLOD) - Restoration & Repair

Рет қаралды 930,034

Жыл бұрын

I bought 2 broken YLOD PS3s to see if I can fix them?
Another PS3 restoration, this second YLoD repair on the channel. This particular unit is a CECHE01 model, YLOD needs no introduction. The console doesn’t turn on and presents a yellow light followed by 3 beeps and a flashing red light i.e. the "Yellow Light of Death" or simply abbreviated YLoD.
PS3 YLOD Fixed with an Original Nec/Tokin Capacitor
On the PlayStation 3, the NEC/TOKIN capacitors are prone to failure, causing a Yellow Light if Death error. This is a guide on replacing those capacitors.
The Yellow Light of Death is not an error with one specific fix; rather, it is a more general failure. This guide addresses ONE of the POTENTIAL problems causing a PS3 Yellow Light of Death, however, these capacitors are prone to failure anyway, so they should be replaced (if you are experienced enough) to help the longevity of the console.
This video shows you everything you need to know about taking apart your Playstation3 Fat. If you need to replace the fan or the disk drive this video will show you how to get inside and disassemble your system. Since this system isn't the newest on the market anymore, it's cheaper to replace the parts yourself than it is to send them in for repairs.
SOME TOOLS FROM THIS PROJECT:
Scratch Remover:amzn.to/3s4gFp3
Screwdriver:amzn.to/3nWgpr7
Hydrogen peroxide: amzn.to/3AI2ZnL
UV LED strip: amzn.to/3KVEuYY
99.9% isopropyl alcohol (IPA): amzn.to/3HdZqbx
#restoration
#repair
#gaming
#asmr
#Playstation
#relaxation_asmr_videos

Пікірлер: 762

@user-gd5zr8xb9g Жыл бұрын

No annoying sound, no annoying music, it's perfect. Thank you for the great video

@resEG Жыл бұрын

Glad you liked it!

@KuroMicra 4 ай бұрын

Your skills never cease to amaze me. My sons and I regularly watch your videos.

@sharkhardware Жыл бұрын

Really... Removing NEC caps WITHOUT CHECKING SYSCON, wow! You are a genius!

@thekillingofamerica3385 Жыл бұрын

You can usually tell if it's nec's the ylod will be delayed or even show image before it turns off

@sharkhardware Жыл бұрын

@@thekillingofamerica3385 Psx-home posted?

@thekillingofamerica3385 Жыл бұрын

@@sharkhardware no experience 🤣 I've reballed, rsx swapped, Nec tokin upgraded to tantalum caps, delidded litterally 500/600 PS3s... I know them intimately unfortunately 😂

@TheMadricks Жыл бұрын

I am impressed. Being able to bring such devices back to life is an art and good for the environment 👍

@wayoflight4153 Жыл бұрын

He brings not back to life this PS3. It's fake. Xbox gamepad :)

@writtergab2976 6 ай бұрын

@@wayoflight4153it's a generic controller, to Xbox, PS3 and PC, dude. Be careful with afirmations that you are not so sure about...

@rebgedshaq06 6 ай бұрын

Where can I Buy the condensators?

@Maximus20778 5 ай бұрын

@@wayoflight4153 learn english

@Gamingconundrum Ай бұрын

It's been proven that the NEC Tokens are not the issue. It's a temporary fix at best. It's the lead soldering between the chip and dye layers. It's a complete waste.

@andresmundacka677 11 ай бұрын

Excelente trabajo . Me sentí identificado cuando reventabas las burbujas 😅

@nuclear_war_games 11 ай бұрын

You've rescued a rare ps3, the very original ones that can play ps2 games and are bloody expensive

@androidgaming-nt6ng 8 ай бұрын

Это у вас она дорогая а у нас дешёвая очень Я исправную с джостиком (хоть и в пыли) брал за 27$ В том состоянии что на видео можно купить за 10$ по Москве

@nuclear_war_games 8 ай бұрын

@@androidgaming-nt6ng lucky

@MajinUber 2 ай бұрын

I had no idea, i have 2, i think one needs a good clean though, might have to spend the weekend doing just that! :D

@nuclear_war_games 2 ай бұрын

@@MajinUber Does it have 4 USB ports?

@MajinUber 2 ай бұрын

@@nuclear_war_games Yeah they both do

@rinaldiekopranata9195 9 ай бұрын

Superb, i always amaze how u fix the broken console 😍

@PRO100_TAYFUN Жыл бұрын

Когда он стал выковыривать кондюки отвёрткой то сразу понял что это тупо дядя Вася из какого то гаража🤣🤣🤣 так нельзя детали отрывать! Можно и дорожки угробить. Флюс и фен в помощь🙂 Лайк всё равно поставил🙂

@MrYardroid 8 ай бұрын

порнуха какаято, но работает)))

@ssvgamesonline9996 2 ай бұрын

да , грубиян ещё тот....

@dj2bas128 9 күн бұрын

Я тоже о дорожках подумал)

@hiimpubg360 Жыл бұрын

Wait how did you connect an Xbox360 Controller to a PS3 ???

@resEG Жыл бұрын

It is not an Xbox 360 controller it is a Rapoo V600 Ergonomic Vibration Shock Controller Gamepad for PC, PS3, and XBOX360, thanks for the visit

@hiimpubg360 Жыл бұрын

@@resEG you are welcome

@mrmeme9700 Жыл бұрын

Every usb wired controller or Bluetooth ones works on ps3 even joy-cons

@muhamadALgazali-gp8nl Жыл бұрын

هث٢خ٤٢١صنصص ٢هه٢١١ ثا٢

@IbanezShreds67 Жыл бұрын

And he's a wise mouth too? 😜🥴🤪😂🙄😆😅🖕.

@alisonsmith4436 Жыл бұрын

You are amazing for fixing this machine up 🔝

@resEG Жыл бұрын

Glad you like it!

@wagnerschiavon5155 Жыл бұрын

*Great Job Dear Restoration EG... Awesome Repair of PlayStation 3 Fat Version... Thanks for Sharing this Great Content!!!* ✌😎

@resEG Жыл бұрын

Thanks! I’m glad you like it.

@310_Latchkey_kid 9 ай бұрын

Very skillful person! Love your videos!!

@resEG 9 ай бұрын

Thank you very much!

@rorymercury4203 Жыл бұрын

Dude, if you think that this solved the problem of YLOD, then you are deeply mistaken. Disassemble, clean from dust and change the thermal paste - this is not enough. Who will scalp RSX and PSX? There, under the covers, is also thermal paste. So expect the PS3 to die again soon. Capacitors from NEC have nothing to do with it at all, why did you touch them? YLOD is a problem caused by overheating and poor soldering of the BGA chip. I’m generally scared to talk about soldering, it’s horror. It hurts me as a repairman to look at this.......

@diecrafter1986 Жыл бұрын

True. Only in very rare cases the necs are at fault. Why do fake videos always get so much attention?

@thriftingbyjl212 4 ай бұрын

So what needed to be done?

@Swif7Shadow 19 күн бұрын

@@thriftingbyjl212 remove the gpu (90nm) and install a harvested one, a 65nm one from later revisions. check RIP felix's videos if you are curious.

@REALPEDROGAMEPLAYS Күн бұрын

@@Swif7Shadowgood deal, I don’t want to do what they do with the caps anyways. It looks exceedingly risky and damaging to the console. Is it still worth fixing alongside everything else like the thermal pads and paste?

@cameronjosias Жыл бұрын

I love this guy. He makes proper restoration videos and not like others that get it by risky places and dumps/landfills. You have earned a sub.

@RBKing80 11 ай бұрын

He is literally a fake like the rest of them

@BulkBogan1920 4 ай бұрын

Those landfill videos are fake and staged

@Shoeg4zer Жыл бұрын

Did I miss something? What happened to the other PS3?

@waelarafa7365 Жыл бұрын

Lots of memories and emotions tied to ps3 for me. Good and humble times

@austinopry 3 ай бұрын

Me too

@ShinryuZensen Жыл бұрын

Fun Fact: it's been already proven that those caps aren't the cause of failure. It's a defect in chipsets of that era.

@christopherbolis2048 Жыл бұрын

Yes, but sometimes the caps fails before che chip itself that's why some ps3s are fixed replacing the nec/tokin

@thall6594 Жыл бұрын

Yeah I hate seeing people just replace the caps without checking the syscon for the actual error. Just fucking the board up for no reason. "bUt iT woRkS nOW" Doubt it will for long.

@carlitos3460 Жыл бұрын

@@thall6594 yeah it would play at max a week or 2 with normal use

@MrChocobit Жыл бұрын

He is so bad. Removing them with a screwdriver. And you right it’s because of a heat problem not the caps

@borisdg Жыл бұрын

@@christopherbolis2048 Not really. You are fixing them, because you are heating the BGA under the chips. It's temporarily.

@RestorationVideo Жыл бұрын

Fabulous work! Each project is both interesting and educational. I learn a lot about items and their workings just watching you.

@resEG Жыл бұрын

Awesome, thank you! Have a great day.

@RBKing80 11 ай бұрын

How not to repair a YLOD console.

@dokkan_battle_ost_loops 9 ай бұрын

I see so much hate about the soldering job but even if it's not very good it still brought back this console to life, so why hating ?

@Arif.M19 2 ай бұрын

why? because they don't know how to use😂

@0Asterite0 2 ай бұрын

temporary fix. didn't even check the codes to see if it was the gpu

@dokkan_battle_ost_loops 2 ай бұрын

@@0Asterite0 Bro it was dead anyway, now it works i know what to do to properly fix a ps3 but his job is still okay.

@0Asterite0 2 ай бұрын

@@dokkan_battle_ost_loopsif if breaks a couple weeks later it just makes him look bad

@dokkan_battle_ost_loops 2 ай бұрын

@@0Asterite0 No because it worked again. Bro stop saying it's bad just because it's not extra perfect with syscon error checked. Not everyone has this kind of time and no matter what every PS3 Fat with the 90nm CPU GPU combo is doomed to die sooner or later, and I doubt about the fact that he has the desire and the capacity to frankenstein the console on it's own. It was already a piece of trash, now at least it works, even for not very long it's still here.

@nakevkv7029 3 ай бұрын

Como siempre un placer ver estos videos

@chazby1 11 ай бұрын

Руки оторвать такому мастеру! Это страшный сон

@user-mf1cl2sn1u 11 ай бұрын

)) рука - лицо ... когда увидел паяльник)) это типичный клинер))

@dominicpulei5260 11 ай бұрын

@@user-mf1cl2sn1u а что он заменил так некрасиво?)))

@user-mf1cl2sn1u 11 ай бұрын

@@dominicpulei5260 кондёры

@Legend828asf5 Жыл бұрын

I always thought that the problem with YLOD was the CPU and GPU, incredible! :D

@carlitos3460 Жыл бұрын

In some cases yes but it’s usually either bad cooling or little to no thermal paste

@felixlutticken5694 Жыл бұрын

the "cell" died on a lot of the ps2 compatible PS3s as they had a way smaller heatsink

@Nascar1243 Жыл бұрын

In this case it probably was the gpu and replacing the tokins happened to get it working but trust me it will only fix it temporarily if the gpu is bad

@jelkobg5944 Жыл бұрын

@@felixlutticken5694 The CELL never was a problem. The real problem was the RSX solder balls between the chip and the tiny board under it.

@ramonpagan695 Жыл бұрын

It is, at least my was. I fixed it by removing the heat spreader and replacing the dry thermal past.

@SuperChespirito Жыл бұрын

Muito bom parabéns pelo vídeo show

@darkjackson666 Жыл бұрын

Adoro ver seus vídeos 💕💕❤️

@chriscravens4915 Жыл бұрын

This is how DK oldies should be restoring game consoles instead of ripping people off….

@sharkhardware Жыл бұрын

I highly doubt that he fixed anything.

@DaveDoc1984 Жыл бұрын

A wild assumption is made that it’s the Tokins. No SYSCON check performed. Horrible removal of the Tokins by jabbing a screwdriver at it! Left the black strip of the Tokins on the board… clearly wasn’t using enough heat so the soldering job of the Caps was crusty and awful….. what exactly have you restored here?

@Shinquapin Жыл бұрын

I completely agree. I was cringing the whole time he ripped off the old caps and soldered the new ones. I hope no one uses this as an example of fixing YLOD.

@adampruchinsky4574 Жыл бұрын

I mean if you guys can do better by all means post something and show this guy up, instead of just commenting negative shit

@DaveDoc1984 Жыл бұрын

@@adampruchinsky4574 Errr no what I have said is just pure common sense when it comes to PS3 repairs. For 1 thing jabbing the board with a screw driver is bad practice, leaving the plastic from the Old Caps is bad... The fact before you even LOOK at the caps, not checking SYSCON is just a brain dead move. No need for me to " show" how I would do it as I wouldn't attempt this myself unless I wired up SYSCON and knew for sure what the issue was.

@diecrafter1986 Жыл бұрын

@@adampruchinsky4574they are right. Also, isn't he using a x bo x Co ntroller in the last Clip???

@jenniferhart6504 11 ай бұрын

What in gods name, that's a pretty nuclear way to go about fixing this.

@stephenvalente3296 5 ай бұрын

Think I'd like to have a custom PCB for those capacitors to make it look a bit tidier, but good work of course. My original release PS3 is still going strong, but not used for a while. Have another early model PS3 that I got free, but was said not to work, so may give that one a look see when have the time.

@Red5_ Күн бұрын

Never asked this guy to rack up the lines

@hoplabobla 7 ай бұрын

This is awesome 🤩

@jamesdriver0317 9 ай бұрын

My brothers CECH-E01 has this issue. I had to open it and disassemble the disc drive to get a PS1 game out of it. Thankfully it works in my PS3 Super Slim

@AlTalawat Жыл бұрын

Always great work PS3 the best console ever

@HaydesGrooves Ай бұрын

How did you know just to replace the Nec Tokin caps to get it to work again? Did you think to use syscon to read the errors? Is the condole still working? Cheers

@spidouche44 4 ай бұрын

I think the first one you show is the first model of the console, retrocompatible PS2, very rare, glad you fixed it

@JimiJamma 2 ай бұрын

You can see it’s a PS3 model CECHC04 at the 5:39 mark. This model is backwards compatible but lacks the emotion engine chip found in earlier CECHA and CECHB models. I found this information on the web. The CECHC04 has got hybrid PS2 emulation, which means that the Graphics Synthesizer is on the motherboard, but the Emotion Engine is emulated by CELL. This means that this model has got additional routine for emulating PS2 Games: ps2_gxemu

@petrpetr9334 Күн бұрын

Nice video 👍

@rrunner102 8 ай бұрын

I also got a ylod once. I hit it once and it works ever since

@MTG69 3 ай бұрын

Slap it back to functioning, I like it. Brute force method.

@user-gd5zr8xb9g Жыл бұрын

لا موسيقى لا كلام لا ثرثرة انه الكمال شكرا لك فيديو رائع ❤

@resEG Жыл бұрын

Glad you liked it!

@mehmet_b_90 7 ай бұрын

What do you use in cleaning for the housing when you had put it in the big container?

@aquilesferreira9657 11 ай бұрын

Nice work! Was it necessary also to replace a new cmos 3.3v battery?

@user-mz2hb5fi3z 2 ай бұрын

По хорошему нужно было ещё скальпировать процессоры и заменить термо интерфейс под их крышками!

@LeandroSouza-bg3mv Жыл бұрын

Eu soldei 4 capacitores de tantalo cor preta de 470 sem tirar os NEC TOKIN no meu PS3 SLIM e deu muito certo

@rolando.delgado Жыл бұрын

capo donde lo soldaste

@LeandroSouza-bg3mv Жыл бұрын

@@rolando.delgado nos capacitores NEC TOKIN do lado debaixo da placa do PS3 SLIM

@Kakeen Жыл бұрын

Absolutely stunning work. I still have my old fat 60 gig (500gig now) PS3, bought it brand new and it wasn't until recently I had to get repaired. Are those NEC chips usually the cause of YLOD?

@Minister596 Жыл бұрын

no, it's usually the solder used under the gpu. 50ish% of the YLOD reports are the solder. The chips replaced here can also be a cause, but not to the extent of the GPU issue.

@thekillingofamerica3385 Жыл бұрын

I do bga rework, and it's almost always a bad rsx chip or bga connections under the rsx, only way to permanently fix is to swap a slim rsx chip on to the cok001 002 boards.. Also called the Frankenstein mod. Works really well

@randomdog4255 Жыл бұрын

Yes, the failure is usually the RSX. Sometimes the tokins fail, but that's pretty rare.

@RBKing80 11 ай бұрын

No they are not. Its normally the RSX

@largevapor 10 ай бұрын

It's like 20% NEC tokin caps

@paulop. Жыл бұрын

Hey love to watch your videos super satisfying. I have a PS2 that won't start should I open it up and try to fix it or send it to get it repaired. I live in florida. Don't know much old console repair shops.

@TheNation89 Жыл бұрын

It’s rather easy it may just need a ribbon that runs for $7 and easy to install, or it needs a power supply. Perhaps just dirty. Mine did the same took 20 minutes to fix good luck 🤞

@carlosmauricioriosvaldez6354 9 ай бұрын

que tipo de capacitores le pusiste a la consola para conseguirlos y reparar mi consola

@luizcorreiademorais6188 2 ай бұрын

Good afternoon EG restoration, I really liked your work, commitment and dedication, essential for this role, I was just in doubt about the new capacitors, they are new NEC/TOKIN models, with the serial number 0E128 - 1200uF according to what came in the box. board, or, are they tantalum capacitors having the same capacitance? Thank you and a big hug.

@resEG 2 ай бұрын

Thank you very much!

@therondavis82 29 күн бұрын

Is this a permanent fix

@Fran_80 Жыл бұрын

En uno de tus vídeos hechas para quitar el oxido unos polvos blancos en agua. Me puede decir de qué se trata? Gracias

@justinjendzejec1474 Ай бұрын

Which capacitors did you replace the NEC ones with? Thank you for the tutorial!

@RBKing80 11 ай бұрын

NEC Tokins are not the cause of the YLOD. It is the RSX Chip. This is a temporary fix

@savsnode2811 8 ай бұрын

I’m curious as to why you didn’t remove the heat spreaders and replace the thermal paste under them.

@user-lg1qq9fh7w 4 ай бұрын

why did you take off the nec tokins of one side and not the ones of the other side?

@Dragon09190 9 ай бұрын

Do I have to change those components or I just need to clean it? I got YLOD yesterday when I was playing

@DaisyHollowBooks Жыл бұрын

I like this video. A bit of information about the parts and what you were doing would have been nice. Thanks.

@resEG Жыл бұрын

Glad you enjoyed it

@Epieic3 Ай бұрын

Did you check the syscon for what error the console presented?

@pyramidsinegypt 7 ай бұрын

Were the tokens actually damaged/dfective or was the replacement just part of a general overhaul? (because the Nec Token caps are usually really really good and have generally not much to do with YLOD in the long run, at least not just by themselves)

@HardcoreGR 3 ай бұрын

actually the oposide. Nec tokins even on old laptops they faill.

@davestrider9838 2 ай бұрын

Not true. Go do some more research @@HardcoreGR

@killjay. Жыл бұрын

anyone else feel like this channel makes the consoles look more dirty and damaged than they were?

@jamesduran3804 Жыл бұрын

@alexsitnikov7020 11 ай бұрын

Самое интересное, что YOLD это не 100% замена токенов, по хорошему сначала надо снять ошибки из SYSCON и они подскажут с 95% вероятностью в чем проблема желтого огня. Простой владелец щас посмотрит - побежит токены менять на танталовые конденсаторы, а там проблема в отвале графического чипа. Короче в описании хотя бы добавили бы про этот момент, чтобы не обнадеживать других.

@bittlejuse 9 ай бұрын

Подписался под каждым словом, автор настоящий варвар.

@targs3165 9 ай бұрын

Невероятно кропотливая работа 😊👍👍🎮

@darthvader6108 4 ай бұрын

припаял как варвар

@chronos9294 11 ай бұрын

Très belle vidéo 👍vous effectuez les réparations par envoi de la PS3 ylod ? Bonne journée

@rul644 10 ай бұрын

Very nice and clean job! What kind of capacitors did you use? Thanks in advance

@Dark_eVader 10 ай бұрын

Turn on sub-titles or read his description.

@rul644 10 ай бұрын

First, i have to confirm my ps3 vers

@adrianvarnavici8374 11 ай бұрын

Cum se numeste jocul cu masini pe care l-ai jucat la sfarsitul clipului?

@alejandroaguirre2613 11 ай бұрын

Por que no grabaste cuando enciendes la consola posterior a su reparación? por que un mando de xbox? la verdad me gusto el video pero lamentablemente se daño todo por ese detalle desde mi punto de vista.

@LUISITO_29 3 ай бұрын

Hola te ago una consulta..yo tengo la super slim .. cuando la prendo me sale la luz amarilla cerca de los puertos usb quiere decir algo ? La play anda igualmente..pero noto q se calienta rapido 😢

@songsan807 Жыл бұрын

The fixing looks doable until he started scraping the chips off and then soldering the smaller yellow chip. Was there a part where he diagnose the issues before doing it and then tested again prior to putting everything back together? I seen videos where they use multi-meters to test.

@Lokii_DX 10 ай бұрын

Usually it’s not the capacitors, it’s more or likely the RSX (the GPU). They were known for their insane power consumption and heat output. The 90 nm variants (the ones found in the launch models) had the most issues. When they started decreasing the size, this decreased power consumption and made them a lot cooler temperature wise. This is why the later Phats, Slims, and Super Slims are the more desirable models, even though they lose PS2 backwards compatibility

@rinossf6201 5 ай бұрын

Hola amigo Como busco esos condensadores de cuantos volt son?

@AlexanderL23 Жыл бұрын

I would like that you give an explanation about that orange or yellow light. Mine is dead since long time 😢

@SafouPlays 25 күн бұрын

New title: I threw 2 ps3 in the desert then clean them.

@PedroNedved Жыл бұрын

macho vei será que compensa sair comprando esses playstation com defeitos no mercado livre , olx e feira do rolo pra consertar ?

@absolute-dream 8 ай бұрын

May I ask how you removed the warranty seal perfectly? What liquid is sprayed after heating it with a heat gun?

@Swif7Shadow 19 күн бұрын

isopropyl alcohol very likely

@centuriolegion2514 2 ай бұрын

danke für die Tollen Videos 💯💪🤝👍

@SHHitsOVER254 3 күн бұрын

Do you own i business or something because I’ve been sitting on my ps3 for about 3yrs and would love to be able to play it again.

@UzuMaki_DiDiK Жыл бұрын

What is the exact name of these capacitors and how many watts? As usual, good job 🤩

@resEG Жыл бұрын

Tantalum Capacitors "330/470uF - 2.5V/6.3V - Rated, Glad you liked it!

@user-hv7iq6nr9d Жыл бұрын

excellent repair. I wanted to ask you if 470uf 2.5v is suitable for this repair?

@sharkhardware Жыл бұрын

@@user-hv7iq6nr9d Не меняй ничего пока не проверишь коды ошибок syscon. Просто в никуда время потратишь, деньги и нервы.

@Josh-Barnett 6 ай бұрын

Nice video but the nec tokens are not the problem. Its gpu failure. To anyone with a ylod ps3, don't replace the tokens unless you know for certan they're the issue. The only real way to make these guys reliable is a 40nm Frankenstein

@user-xu1kj5qe3b Жыл бұрын

Не верю я в такой ремонт , проблема явно в перегретых CELL и RSX их надо перекатывать на свинцовые шарики , обязательно скальпировать и там под железными крышками тоже менять термопасту. Это видео шляпа !!!

@boobizi974 Жыл бұрын

hello do you know how to remove the demonstration mode on ps3 in version 4.90?

@MsJavier2021 Жыл бұрын

por cual repuestos cambiastes las partes originales dañadas..por favor...

@re-fix9678 Жыл бұрын

good restore👍👍

@resEG Жыл бұрын

Thanks 👍for the kind words! Thanks, buddy! Have a great day.

@cupidomegasbelmont3828 Жыл бұрын

Por que, no le cambiaste la pasta térmica?

@xidexe Жыл бұрын

Helo, On which site did you buy these electronic components plz

@gn6969 Жыл бұрын

Can you tell me which tantulam capacitor is that? Like how many volts I have

@glennsienaert5595 9 күн бұрын

Ik heb een 2 tal playstation 2 phat die aan gaan disk lezen maar geen geluid of beeld [no signal] wat kan dit zijn denk je?

@skcvdcuxft0ighgtahahahahav315 Жыл бұрын

Very nice

@ManuelPassioneHardware 6 ай бұрын

Mi è piaciuto tutto tranne quando hai steso la pasta! Ormai troppi test acclamati confermano la goccia al centro o meglio il chicco di riso come quello migliore in tutto!! Cmq ottimo lavoro meriteresti 10mila Like per questa chicca!!

@franciscotorres7638 Жыл бұрын

I seen someone say it plays PS2 games. It also plays PS1 as well. Those are still very much wanted PS3's. Also the yellow things/orange things you used to replace what exactly is that? I am actually getting into working on systems and any information helps. Thanks

@user-zx4tg2zv6v Жыл бұрын

이야~ 이걸 고치네요... 혹시 제 구형 PS3도 보내면 수리해주시나요? 쓰다 쓰다 쿨링팬 소음이 심해서 놔뒀거든요;;

@WillisWheeler Жыл бұрын

this is what dkoldies is supposed to do

@pepecorrea71 Жыл бұрын

Solo has cambiado los capacitores de la parte trasera? has puesto 4 y 3 capacitores...pensaba que tenían que múltiplos de 4 .con eso ya es suficiente? Por cierto buen video, ya he visto unos cuantos y cada uno lo hace de una manera diferente

@saintaxlxyzero Жыл бұрын

En la guía oficial de la scene dice q hay q poner 4 de 470uf x c/d uno noc xq no hacen caso🙄ademas recomiendan usar el siscon para saber específicamente el error

@chillnspace777 11 ай бұрын

I have a fat ps3. The fan is like a jet engine. How do I remedy this. Is it just dust, or would I need to do the thermal past as well?

@andresmacias4229 Жыл бұрын

I just got back 2 A01 models from a repair shop and they couldn’t fix YLOD on both. Can you fix mine??

@boredstudent 13 күн бұрын

I had a fat model PS3 starting in 2009 and around maybe 2014 or 2015 is when I experienced the yellow light of death. I don't have it anymore because I sent it to Playstation Support for a trade in and they sent me a Super Slim model PS3 which I still have to this day.

@martinward6422 Жыл бұрын

hi bro can you help i got ps3 40gb console when i turn it on im getting a red light it only turn green for a couple second then i hear 3 r 4 beeps then the red light start blinking i put new paste on the top gpu and cpu and done the reflow i haven't remove the chips do you think it's the nec tokin anyhelp many thanks

@user-vq9kp1zo8i 9 ай бұрын

I would love to have my PlayStation3 repaired as well. It has the same symptoms as the video.

@Gamingconundrum Ай бұрын

Check out R.I.P. Felix. Get some real information and answers.

@bilka064 Жыл бұрын

What is the value of the replaced capacitors

@jessegaylard4157 4 ай бұрын

Which copacitors did you use?

@michael9613 Жыл бұрын

You know, that thing can play PS2 games as well it's an early backwards compatible model

@resEG Жыл бұрын

Thank you for giving me this information! Have a great day.

@Ckeymanx Ай бұрын

Okay i gotta ask, why did you rip off the old chips and soldered in a bunch that made it look like a mess?

@bobruiCooL Жыл бұрын

А вы не занимаетесь ремонтом и\или изготовлением геймпадов к пс3 ? Валяются 2 сломанных.

@Sersoftprod Жыл бұрын

How mny farads/voltage in those replacement capacitors

@Annatoll4444 5 ай бұрын

Ohne viel Worte aber trotzdem gut verständlich!.Mich würde aber noch interessieren welchen Controller benutzt du denn da am Ende.Das sah aus wie der XBox Controller.

@Kat_Creates Жыл бұрын

I think it would be helpful if you added a text description of what was happening in the video. Alot of the time I was confused about what product you were using or what parts you were disassembling and for what reason.

@jamesdeason763 Жыл бұрын

Not sure if they were on already, but the subtitles add some informative information during the repair.

@zerostar33 Жыл бұрын

I’m thankful that people put in the time and effort to make these videos but yeah when you’re doing a repair you should narrate it. What’s with this mime stuff? Just tell everyone what’s going on.