I Bought a Broken Road Grader! - Auction Find

I Bought a Broken Road Grader! - Auction Find - Allis Chalmers M65

Рет қаралды 10,376

Randy's Relics

3 ай бұрын

Checking out and unloading my latest acquisition. An Allis Chalmers M65 road grader.

Пікірлер: 42

@RJ1999x 3 ай бұрын

The greatest and longest running small grader ever made. Allis Chalmers 👍👍

@Ron-zi3cg 3 ай бұрын

I've always liked those, they're purdy maneuverable, they're purdy easy to handle.

@brock50pullingvideos 3 ай бұрын

Very clean grader. Hope you put some TLC in it and get her running.

@Ron-zi3cg 3 ай бұрын

Yes it is clean lookin piece of equipment, it just needs a little TLC and a little goin over, under the hood and maybe some other places. If I was gonna use it in the verylate evenins, I'd make sure the lights all worked and I might do that anyway just to be on the safe side.

@kenfrazier616 3 ай бұрын

pretty slick and a great tool for the farm

@davidperry970 3 ай бұрын

Good find. Your Dozer runs perfect, even the pony .

@jazzerbyte 2 ай бұрын

Nice unit with hydraulic controls. Looking forward to seeing it run.

@davidbarnes706 3 ай бұрын

They were a good little grader

@jeffferanec4526 3 ай бұрын

Nice find, treat it well.

@plainnpretty 3 ай бұрын

Nice little grader I’m looking forward to seeing what you do with it. Your little kitty purrs nice Thanks Randy

@michaellynskey7124 3 ай бұрын

When the Allis grader engine head gasket going to start. New Idea which was part owned by a huge landowner in the uk always used new idea on the three dairy farms in Norfolk, The new idea foragers used a V8 Allis Chalmers engine and were so powerful it was unbelievable 🇬🇧🇮🇪.

@rirebel6029 3 ай бұрын

We used to run that lead substitute in every tank of our allis chalmers d14 little farm tractor growing up! Great running little bugger

@kirk467 3 ай бұрын

You can cut ditches with it and grade your roads and driveways! Looks like you have a nice place to park it out of the elements! You have a nice barn brother! Thanks for sharing, Louisiana sending prayers and positive vibes to you and your family! 🙏🏻🙏🏻🙏🏻👏🏻👏🏻👏🏻👏🏻👌🏻👍🏻👍🏻🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🙋🏼✌🏻✌🏻

@Jason1Pa 3 ай бұрын

I can't wait to see the progress on this one😮

@mrclaus859 3 ай бұрын

Can't wait for you to get it going

@dennismayer3268 3 ай бұрын

Good job on the the off load!

@cassidymccoy9837 3 ай бұрын

Cool little grader! Also the tow pig is an absolute beauty!

@rbtractorman 3 ай бұрын

Looks good Randy! Was cool watching the D2 get used.

@ronaldsnell1503 3 ай бұрын

Awesome

@williammatzek4660 3 ай бұрын

That drive shaft in the cab goes on. that machine some where! I've seen pictures of a D John Deere with that grader conversion.

@tmonteIH 3 ай бұрын

Optional extra long spark plug wires.

@MikeJensen-wo7oh 3 ай бұрын

Very cool! Like you I've kind of wanted an Allis grader of some sort for quite awhile. Have passed on some 'speed patrols' they take up a lot of room! If a 'speed maintainer' ever comes up for sale..... Had to break out the Allis bible to get the right terms for them. A later one like in this video would be cool too. Looking for info, check out the unofficial Allis board, there is an industrial equipment section. Good luck with the project!

@tyhogue8316 3 ай бұрын

It landed on my trailer!🤣 I’m gonna have to try that one on my wife.😬

@Ron-zi3cg 3 ай бұрын

Looks like you might have to find a steerin wheel for it.

@sprocketearth 3 ай бұрын

Has the creeper transmission thats the little lever on your left when you sit in the seat. also i noticed your tandems are seized as you were unloading

@Randys_Relics 3 ай бұрын

Thanks for the tip on the creeper gear! Everything rolls free, the rear tires were wedged on the dozer blade.

@sprocketearth 3 ай бұрын

@@Randys_Relics Hey Mate very tidy Grader you have . ,I have four of them Graders 2 are being built up from a bare chassis let me know if you need any info when you are working on yours

@d9gdon45 3 ай бұрын

I emailed the parts manual to you. I know them inside and out too.

@JonesBoy740 3 ай бұрын

Just stumbled onto your channel a week ago, I have a few questions maybe you could answer about my model c I have.

@Randys_Relics 3 ай бұрын

Shoot me an email. contactrandysrelics@gmail.com

@mikehasel5692 3 ай бұрын

What size was the trailer you moved it on and how did it pull with the weight that far back? Look at one myself and would like to be able to move it without hiring someone

@Randys_Relics 3 ай бұрын

The trailer has 7,000 lb axles, 20 ft long. I think it could use a little more tongue weight but it wasn't terrible. Though I'm not sure how it would do at highway speeds. But at 55 miles an hour it did pretty good. The shipping weight listed for this grader is 10,220 lb, 3,190lb on the front wheels and 7,030lb on the rear wheels.

@yvestressens3990 3 ай бұрын

🤚👍

@johncollings6799 3 ай бұрын

Does your M1008 have the original 6.2 diesel engine to pull your trailer with that grader.

@Randys_Relics 3 ай бұрын

Yup factory drive line. M1028, 6.2, th400, np205, 4.56 gears. She gets you there, eventually....

@johncollings6799 3 ай бұрын

I have 1031 converted to 1028a1 although has Dual rear tires Is supposably factory. Same gear ratio transmission. Trying to put a flat bed together to put on it because it is or was basically cab and chassie when I got it

@kirk467 3 ай бұрын

Maybe you can google the owners manual and download it!

@tomlallman8772 3 ай бұрын

I know the 170 allis Chalmers has 6 cylinder motors in them my neighbor has one

@Randys_Relics 3 ай бұрын

It's possible he has a 180. A 170 only ever came with a 226Ci gas or a 236 CI Perkins diesel. I'm not sure if there's even enough room to squeeze a 6-cylinder into a 170.