Jogs especially the last gen two strokes are super common in new Zealand, only problem I have with jogs is that installing bigger carbs can be a bit of challenge due to room

No matter what you do, DO NOT change the engine on the jog. They come stock with the minarelli short block, which means the space from the front wheel to the back is very short. This makes it extremely easy to wheelie. Some cvt work and it's just powerwheelie with stock exhaust, carb and cylinder. With a 70cc it rides so smoothly. I had one a little while ago, it's on my channel if you wanna see how it looks, but that thing was just mint. If you change the engine it will be super hard to wheelie and half the fun if even.

just discovered your channel because im buying a jog in a couple weeks. perfect timing. cant wait to see what you do

I’m a elite guy but love the jogs I’d suggest getting the polini 360 intake helps a lot with fitting the bigger carb in , also do zuma front end and maybe rear but horizontal motor can make some good numbers!! With little mods our 3kj is absolute ripper

I had two jogs one blue and one black. I bought from a guy in FL. I just cleaned the carbs and they were so fun.

sick video man, awesome jog!

i have a 2006 yamaha jog r i have a 19mm carb with a 61 jet with a tecnigas exhust and it will cut out as you drive i will be full throttle going like 21mph and it will just cut power then regain it over and over again any help will be aprecheted ( i have also replaced the crank and everything from the vairaitaor foward )due to the crank nut striping the threads

I really love the combination of black and purple on the jog, it maked it look mint.Keep up the good work.

i love those mini edits in every beginning. keep them they fire🔥🔥🔥

Can’t wait to see what you do to your jog. I have the same one in blue and gray.

Love the channel, been riding a ruckus but thinking about a pre bug. You guys are awesome.

Let’s gooo been waiting for this, wheelie build for sure ! Got one myself as well bro, I’ll send you some pics

Dope ride my dude and if its not a wheely bike its gotta be a speed deamon! stoked to se what you do with it

Love this man you've helped me so much !! I've subscribed !! Gy6

I picked up a jog a few months back and it is so hard to find videos of them, can’t wait to see more jog videos

love the jogs man! glad you got to buy one.

Hey bro! Nice video😊 but i have a Question i have a MBK BOOSTER but it was running good till i left it sit for 2 days and it won't start i checkt the spark plug and its not the problem i bhought a new coil stil nothing i don't know whats the problem it think it's the black box or is it an problem in the engine PLEASE i need your help if you know please make a video or just comment❤ Thank you very much!

That's hell of a score,I've been looking for one out my way

hell yeah stoked you got a jog! I got a honda elite 😀

ive got a gy6. it has a 70 kit and polini variator, i was thinking clutch or carb next haha. love the vids man!!!

ive got an yamaha jog AS.. but its so cool to see a jog on your channel, keep up the good work :)

I had one of these when living in Australia. It is still better than most of the mopeds today. It averaged 46mph top speed +- 15mph bearing in mind I weigh in heavy. It was a fun bike and very practical. Good luck with your purchase.

Always with the A1 Content !, I got that GY6 Metruck Build

Would love nothing more than to see you go all out and make something like you haven't before so get the long stroke crank like a 45x90 and a 90 kit or 100fast and make an absolute beast out of that thing trust me will not be regretted

Super clean jog I wanted to pick it up for when I come down to Vegas!

In Puerto Rico, in this condition the Yamaha Jog is valued almost at $5,000+. Right now One is selling near my workplace for $4,000. 😢 0 paperwork. It breaks my heart.

Shoutout the Mopboys. Love the vids

intro beat is goated.

Excellent stuff. I have one of these as well waiting in line for a build, Same colour combat too. We got every model jog here in Australia except those weird posh ones with round noses.

Can’t wait to get a scrape bar before Ferry 2 Ferry next year 🤘

Hy i have Mkb Yamaha scooter ,new model,do you have parts for this?

Love your videos I have a razz same as your jog but I bought it for cheap about a year ago but haven’t had the time and money it needs a new piston and cylinder but I can’t complain I even got the title👍🏻 I’ll be watching so I can do the same to mine! Mopboys for life 🤙🏻

Love the colors on the jogs, white ones are clean 👌🏽 (Elite)

Something you should do is getting the European handle shield and light housing headlight and turn light they are much nicer and pretty

Perfect pick up scenario where it's worth paying a pretty penny. It's also the exact jog I've wanted since day 1. I've only had 1 chance to scoop one, and it got away from me. I'd say build it to be fast, and beat on some elites. For the giveaway I have an elite 😉

Love the videos keep it up.

Thats a really beautiful Jog, congratulations ! I got one from the same year and colour, but the front, the rear lights and the panel are different from what we got here in Brazil, i find that really interesting. Also they are really popular for tunning here, we normally use a Yamaha RD135 carburator and the Malossi/Eurocilindro big block kit's. I'm anxious to see the development of your project, have a great time!

That's a pretty clean jog‼️

Yamaha aerox are they rare I've never known there's a mint looking one with a blown engine on market place in my area for 1000 should I cop it

Super clean build, might have to pick up some merch 😏

Been wanting to get a job like that man that thing is pretty clean I’ve got a Honda sb50 AF16 on the way nice Build cooming!😅

How do you feel about the high weel scooters such as the scarabeo or liberty which came in horizontal minarelli and piaggio hyper 2 configs

Wish I had a jog to mess with we rarely have um in hawaii, but love the stock style of it and it has many varieties of aftermarket parts for this bike a bit pricey but well worth it, nice bike man keep up the content

yo do you think i could fit one of those scrape bars on my bugeye ?😮

Finally , nobody on yt has good jog content

love your content man and i have a 125cc GY6

Ehat dont you have mbk nitros in the states?? And for the yamaga jog i would say go for an top speed build cause those short minarally engines is able the do so speed if you allow it

Jogs are honestly such a good bike to have in general you can do so much to them

What’s a good budget scooter that is easy and cheap to upgrade?

Did you guys get the italjet dragster?

Jogs are fun for stunts mine has 70cc ported kit exaust variator and new springs 21mm delorto carb whit malossi filter pod its good but you can also get a advanced key for the stator its made by tnt I think it advances the timing a little bit but makes it ride better

Great vid good give away idea love the jogs

2fast 100 cc would be awesome too see on it, they run very well on Yamaha jog’s or if you wanna continue using 70cc’s try using Malossi 70cc MHR it also crazy with Yamaha. Once saw a 2 cylinder 100cc 2fast Yamaha Jog. But up to what you prefer! Mild or Wild is always what you personally like.

i would say wild setup because yamaha jog's and pgo comet's are very light and easy to tune and that makes it very fun

Love the color and look of the jog gy6 here

Just got one to white same style put a 70cc bbk it rips so hard. Im never selling mine

I like your shop - organized and all the tools you need there. Honda Elite

You're the man dude sweet scooter. I have a GY6 thanks man

Hey when are you gonna get a Yamaha zuma 125?

That's a sweet jog. I myself am looking for a white and purple jog. There hard to find. I would build it to be fast. Keep up the good work. I love your scooter channel.

I have an '01 Honda Elite SR that I bought for $20 two years ago. It's hit mechanically but it has all the bodywork in decent shape. I've slowly been gathering the parts needed to fix it, but I'm broke so it's taking a while. The last thing I got was a TWH 48mm cylinder kit to replace the scored stocker. Hoping to get the scooter built this winter so it'll be ready for spring

Jog ftw. The 3kj is a good platform for a build. I got a jog aprio from Japan makes power easy you just need to get a aftermarket cdi to get past the rev limiter they have. Not sure if the us models are the same

I found an elite for $650 in my area and was planning to buy it, I just sold something and was going to buy it. I honestly wanted to buy a new exhaust for it since the listing shows a massive dent in it. Hopefully it doesn’t have any major issues

Love the new ride. A,elitejog..hook that baby up Trevor. Can't wait. Old man mop

A good alternative to the Yamaha Aerox that was sold here in the United States is one of its competitors in the same class, Aprilia, SR50. Then, again, the Malaguti F12 is already super similar to the Yamaha Aerox, and would pretty much end up being the same bike.

I have a elite I could use the belt or lever 🤙🏽 dope videos too 🤙🏽

gy6 good vid bro keep it up

Dont gotta elite or gy6 but that gy6 clutch might work on my aero 125 🤔

Love the channel, and love the new bike mana i have that same one i ride all the time. Definitely not that clean though

Nice video!

Here in New Zealand we commonly get the jog, the really hard to find one is the CE50e jog

Jogs are so fire 🔥 always wanted one. Love the black dash. (Elite)

i have a honda elite ch80 but always wanted a yamaha jog!! clean pickup!!

Love youe vids

It is worth it as an adult. As a 13 year old, I night a 1994 in the same colors for $400. LOVED that thing. If I could one local, I would buy it.

These are so cool i have wanted one These things for the longest time and yeah he's right hard to find and most time there in rough condition

Got a 94’ elite just finishing up refurbishing need that belt and that brake for my quick stroker elite 😂 Also built the jog my buddy’s got one they’re fun to build and a bunch of parts of ali express that work for it real fun to build 🤙🏽🤙🏽

Been watching you for I think at least 5 years now lovum

fire. the jog and vino cases have a factory trrench done to the cases that the horizontal minarellis dont.

Yo dude I am from the uk I used to have so many Aerox I used to build everyone I would love to try and get one over to you we pick them for about 600 pounds over here 😢

Good vid yo ;)

Crazy what you do to these mopeds

Gy6 but wish I had an elite. Super expensive on Maui and not sure if it’s worth shipping.

Gotta make a drag race jog with the cylinder from the f12 , and the belts are a tiny bit smaller than bugeys. Im building a couple of vinos and they use the same style engine but with a factory trenched case the 5bm. But the jogs and vinos boogy

I had a Mk1 Japanese built Jog (1990) and tuning parts were unobtanium at the time. Loved it though, even with the pink seat.

I have the same jog. They look cool

So are you getting a Aerox or what?

What about piaggio zip had the most fun with mine full mallossi set up not had as much fun on a ped since

If it uses the 1st gen horizontal engine it's gonna be fast when tuned! 1 of these was my 1st legal bike on the road, now I have 2 last gen jog rr liquid cooled

Full malossi Cilinder 70CC Vario + CLutch Springs rollers Carb min 21mm maybe higher ? deppending on the setup etc 70CC malossi exhaust

Love this Colour way, its so sick.

that’s going too be the cleanest build

Build that jog bro they wicked ped builds

Okay but how do you make the damn rear drum brakes work so good.

Im sure its gonna rip just like the others. Go for it. Have an elite.

I had 2 of these scooters 15 years ago there called jog artistic in my country and different light housing best scooters gd luck

Your ability to acquire these units is savagery.

would you do a yamaha dt50lc enduro? it would be very cool to see you build a offroad/onroad bike. alot of people from different countries tune them to so there's parts out there!

sheeeesh ive been waiting for this

In Finland we have so many jogs and they are so nice!