I Bought an Odroid GO with a Strange FAULT

No video

I Bought an Odroid GO with a Strange FAULT | Can I FIX It?

Рет қаралды 136,604

Жыл бұрын

This Hard Kernel Odroid Go Advance was bought from Facebook Marketplace for £20. It has an odd fault, and doesn't seem to power on properly.
Let's see if we can fix it!
Hope you enjoy!
Steve
PS. I'm not an expert in repairs at all. I do this for fun, and it may not be the best or safest way to go about repairing broken stuff. I'm pretty good at melting plastic though. Please don't copy me - I'm an idiot.
SUPPORT ME on Patreon: bit.ly/ssf-patreon
MERCH: stezstixfix.com
AMAZON WISH LIST: bit.ly/ssf-wish
SUBSCRIBE HERE: bit.ly/ssf-sub
FOLLOW ME on Facebook: bit.ly/ssf-fbook
If you want to make a device donation to the channel, please use the following PO Box. PLEASE NOTE that this is not a repair service, and all items are non-returnable.
PO BOX ADDRESS: StezStix Fix?, PO Box 415, BOLTON, BL4 4AZ
Please only use this service if you are a UK resident and using Royal Mail.
Some of the magic things I use to break stuff;
My soldering iron: UK amzn.to/2Isf360 US amzn.to/3dfq8Xe
My hot air station: UK amzn.to/3kPxaBQ US amzn.to/3xo0SoM
My microscope: UK amzn.to/2VP3msU US amzn.to/3DmDgED
My desoldering gun that goes "moo": UK amzn.to/3HHt73P US amzn.to/3QHJOkb
My multimeter: UK amzn.to/2LjBgnN US amzn.to/3qEiSHy
My blue mat: UK amzn.to/3nDVs3A US amzn.to/3LcZUkI
Filming equipment;
My camera: UK amzn.to/38IdR7s US amzn.to/3BiwyNg
My 2nd camera: UK amzn.to/3Rfjn6U US amzn.to/3BGOB1i
My microphone: UK amzn.to/3rCriPc US amzn.to/3QJwWtS
VOS's mic: UK amzn.to/3pz2c1L US amzn.to/3Lc7aO1
Links are affiliated where possible to help support the channel. Nice.

Пікірлер: 267

@StezStixFix Жыл бұрын

Stupid... Stupid game

@grayskaut Жыл бұрын

😝😝I'm watching just for this moment

@mr.flex3017 Жыл бұрын

Nice repair 🎉😊

@collcollk4662 Жыл бұрын

Would you like a Gameboy Pocket present?

@evilmissf Жыл бұрын

Good video, but as a massive WHAM! Fan as a teenager, I've gotta say that was sacrilege listening to that version of wake me up, however I'm willing to forgive and forget as the video content was good lol 😄😁😆😅🤣😂❤

@meinkamph5327 Жыл бұрын

You should learn how to make ur own resistors at home. Or how to tweak the ones you already have.

@TravisFabel Жыл бұрын

I think that really really low value resistor was acting as a shunt so it could measure the power draw. That's why the power went through it.

@TheWeepingCorpse Жыл бұрын

Steve you need to replace that 0ohm resistor with a proper 0.01ohm 1% pronto, it might be part of the battery charging circuit and very bad things 🔥could happen if the battery is overcharged.

@SimonEllwood Жыл бұрын

I agree with this. Do not leave it charging for a long time until you fit the correct part.

@TobiTheX Жыл бұрын

I looked at the RK817 data sheet and your suspicion is correct: That is the battery gauge sense resistor - It needs to be the correct value or you will overcharge the battery.

@RFX01 Жыл бұрын

I'm thinking it probably acts as a shunt for sensing the battery current, either for charging or discharging. It probably won't cause an overcharge, but it might result in too much charging current, which isn't exactly good either. It might also cause issues for the accuracy of the battery percentage reading, since the current draw is usually used to compensate for the voltage drop.

@AkitaTek Жыл бұрын

Exactly, you find the exact same type of resistor (but way bigger) on EVERY laptop on DC Side and Bat side, it's main propose is to sense current

@reckley Жыл бұрын

I work in an industry where you just replace the board, the components are tiny. I salute you for being able to do it.

@filips7158 Жыл бұрын

Good fix! A note though, the 10mOhm resistor could have been a current sense resistor for overcurrent detection. That's how shunt current sensors work, you feed the difference voltage from either terminal of the resistor to a differential op amp and it gives you measurable voltage from a few millivolts or less. a 0-ohm will yield 0 voltage drop, so your current sensor will always measure 0 amps. It's just a protection though, so it can work without. Cheers

@BuyitFixit Жыл бұрын

Great Job Steve! Those pesky resistors and capacitors falling off. On a side note FB1 FB2 or FB normally means ferrite bead, not a fuse :)

@BennyAlex98 Жыл бұрын

what are those for?

@ralphj4012 Жыл бұрын

@@BennyAlex98 Usually (but not always) part of a filter circuit (usually with capacitors to form an LC circuit) to suppress power supply switching noise from affecting sensitive components (micros etc). Measures like an inductor (low resistance).

@brianliscum6905 Жыл бұрын

Pretty sure fb is Facebook

@hunam3876 Жыл бұрын

they don't just fall off, it's the stupid user doing stupid shit to their electronics.

@jnharton Жыл бұрын

I don't think they just fell off... Seems more likely that the circuit got overloaded somehow and burned up the 0 ohm resistor and torched that 100uF capacitor too.

@JVerschueren Жыл бұрын

Steve, when measuring small resistance (let's say less than 10 Ohms) with a handheld multimeter, you should always "zero your leads", i.e. check the reading on the multimeter with the leads shorted and, if it's not zero, substract it from the measured value. A good set of leads should read about 0.06 Ohms, which your multimeter should round up to 0.1 Ohms. If it doesn't, then the "0" Ohm resistor does indeed have some resistance. At my job I regularly measure resistances of 0.0001 Ohms or lower, so 0.01 Ohm is a fairly large one in the world of current measuring shunts.

@GameRaveTV Жыл бұрын

Appreciation post for always super cleaning the area of work. I've seen other repairers leave stains on the board, which drives me nuts. Love it!

@samholdsworth420 Жыл бұрын

Who cares if you don't see it lol

@GameRaveTV Жыл бұрын

@Sam Holdsworth It's a reflection of the repair worker in both work ethic and care about the item they're working on. Stez amplifies this by how he won't give up on most things until there's absolutely nothing else to try. If you sent in something to be repaired, you'd want it back as close to the factory, wouldn't you?

@samholdsworth420 Жыл бұрын

@@GameRaveTV fair enough.

@Ea-Nasir_Copper_Co Жыл бұрын

@@samholdsworth420 Dirt can promote corrosion, and of course it's harder to inspect your work for bridges and cold solder joints if you don't clean it properly. It seems to me that a lot of youngish men interpret cleanliness as fussiness and therefore weak. It's almost as if they're threatened by something looking good, as if that coded unmanly for some reason.

@samholdsworth420 Жыл бұрын

@@Ea-Nasir_Copper_Co no I just wouldn't care... And I'm 42 years old I'm not very young lol

@hugegamer5988 Жыл бұрын

I still remember my first zero ohm resistor fondly, I was so excited! My first room temperature superconductor! I had all kinds of stuff planned so you can probably tell how sad I was when I ran some amperage through and measured a voltage drop. :(.

@kikihobbyrepair Жыл бұрын

Nice fix Steve! A 0,01 Ohm resistor (or any really low precize value resistor) is usually a current sensing resistor. The device is measuring the voltage drop on that specific value and then it can calculate the current draw. I do now know the entire circuit could be that it is measuring the current draw of teh device or charging current or something like this and if there would be a short for example it would know that there is an excess overcurrent so it would shut down. You might have killed this feature now because it will definitely measure some odd value.

@hugegamer5988 Жыл бұрын

These are often part of the smart battery management chipset in gaming devices with a battery. Sometimes it’s on its own micro board on the end of the battery, but often it’s either on its own separate board off the battery or on the main board itself.

@kikihobbyrepair Жыл бұрын

@@hugegamer5988 yes, in most modern devices, battery management is solved by specific ICs and the implemented BMS on the battery.

@martinfyhn1976 Жыл бұрын

If it's for measuring charge current, it could possibly damage the battery. Regardless, please replace it with a precise 0.01 Ohm resistor ASAP, Steve! 🙏😬😁

@P3PPING Жыл бұрын

My Poppa was an electrical engineer and I have fond memories of watching him fixing the neighbourhood's broken electrical goods. Your channel has a similar vibe to those days I lost, thank you! (P.s I don't think you're an old man!)

@bogart01 Жыл бұрын

The troubleshooting part never gets old. Keep it up!

@TheRealBobHickman Жыл бұрын

0.01 ohm resistor is most likely for sensing the charge current.

@prunkd Жыл бұрын

That was also my first guess, especially being located right next to the battery terminal. Looking at the datasheet confirmes it: the resistor is connected to the SNSP and SNSN pins of the RK817 chip, which are responsible for "Bat charging and discharging sense current".

@martinfyhn1976 Жыл бұрын

I feared that, and it makes it pretty damned important to replace it

@relax142 Жыл бұрын

12:41 is the reason I watch this channel. This flip would literally happen to all of us repairing stuff. Keep it real dude!

@rciancia Жыл бұрын

Nice fix..... makes you wonder what exploded those components... likely the wrong power supply..... you are lucky the voltage regulator was not fried as well... GOOD STUFF Mate !!

@StezStixFix Жыл бұрын

Cheers Ron, Yeah, good point, I wonder if the voltage regulator is gonna last? 🤔

@hugegamer5988 Жыл бұрын

What, you mean ceramic caps aren’t supposed to explode? I’ve been electronicing wrong all these years! Next you’ll tell me they don’t actually hide all the colors in every LED, your just not over currenting it enough.

@rciancia Жыл бұрын

@@hugegamer5988 HAHAHAHA

@jasonrhodes9683 Жыл бұрын

it was made in a Chinese factory so they were probably not put on correctly. It seems they are still on the factory floor somewhere.

@DalmaTon-Records Жыл бұрын

@@hugegamer5988 Heh, if it worries you ceramic caps exploding, you should take a look at tantalum ones. They tend to explode like a little bombs... 😁 Cheers!

@hurricaneJason07 Жыл бұрын

I love the fact that you fix things that other people can't.. but your phone (tablet?) screen has a crack in it just like everybody else's.

@SixtyDoesStuff Жыл бұрын

"I think there's something going on." Stez, 2022

@StezStixFix Жыл бұрын

🤣🤣

@chrisj2848 Жыл бұрын

Beauty!! Stupid exploding components.... 👍

@StezStixFix Жыл бұрын

🤣 I hope they did explode, no idea how that happens otherwise, unless it took a nasty fall and they fell out!

@unperrier5998 Жыл бұрын

1,100 subscribers more than last week. Well done!

@roccodimarcod3285 Жыл бұрын

I have watched everyone of your videos, even though I understand zero of what you’re doing. Def one of my favorite channels.

@Diana-um4zj Жыл бұрын

The fireworks graphics were a beautiful touch 🎆👌

@PITAProductions Жыл бұрын

Made me LOL

@andrasszabo7386 Жыл бұрын

That resistor is the current sense resistor. Not always needed for the console to work, but if you have charging issues later, at least you will know where is the fault.

@dodgydruid Жыл бұрын

A mate of mine had a funny one come into his shop last week, chap brought in a motherboard missing some components and he was quite distressed as no matter what he did, the components he had changed kept falling off... so me friend said what solder are you using and the chap an older bloke said "Oh I used some of that low melt solder everyone raves on about"... mystery solved

@Wenlocktvdx Жыл бұрын

The gold cylinder marked X1 is a crystal. The numbers are likely the frequency, just over 12mhz it looks like

@wisher21uk Жыл бұрын

Brilliant fix well spotted

@Millzieeeee Жыл бұрын

do you ever get stressed out with repairs ? I often feel flustered and overwhelmed at times doing repairs , most of the time is like repeat putting back together to tear down again to go over something again, or the likes, I dont know what the right words are but i like that you seem really calm and clear headed when doing these videos, couldnt be me, so props to you !

@MrMegaManFan Жыл бұрын

Well done bringing this one back to life!

@kaelin000 5 ай бұрын

I've seen surface mount 0-ohm resistors used a couple of ways, principally as a jumper instead of using a via to another layer to hop over another track on the PCB, I've also seen them used as a "poor man's fuse" since the component may be electronically inconsequential it still has a maximum power rating, which can be more practical than using an actual fuse ~ particularly around batteries where a fixed amperage fuse can be problematic

@BritishAdam Жыл бұрын

What on earth happened to that poor Odroid for it to have shat out its components?! Nice fix & video as always. Can we get a KZfaq Repairmen Song, get together with some other tech repair peeps on KZfaq and all have a singsong together? That'd be fantastic

@StezStixFix Жыл бұрын

No idea what happened to it, I'm guessing dropped, or someone took some pliers to the battery connector and starting pulling away for fun! Great idea on the song, I'll ask around, maybe a Christmas rap?! I'm sure everyone will hate that! 😁😬

@Teesixhundred Жыл бұрын

@@StezStixFix Hmmmm, wouldn't that be C-rap? Great idea, look forward to hearing it!

@swilco266 8 ай бұрын

I have one of these, you got an original, the revised ones had usb c. They're cool, came in a kitset and you assembled it yourself :)

@jenselstner5527 Жыл бұрын

Searched for use of that milli ohm resistor. Could be an amp-sensor, converting amps to volts for an IC to measure.

Жыл бұрын

Nice flow, even got a rhyme today!

@StezStixFix Жыл бұрын

😁 I hope I'm pronouncing your name correctly, but it does rhyme nicely with "throw your hands in the air!" the way I say it! 🤣

Жыл бұрын

@@StezStixFix Your pronunciation is more than perfect! Even french people has trouble with my last name...

@ApostatesStink Жыл бұрын

You are amazing at being able to fix things.

@Spardin Жыл бұрын

i got one of these in the sale for £50 pretty fun to build and fun to play on

@OnYourSquare Жыл бұрын

That was Battery Current Sense. The charge chip diverts a portion of the USB charge voltage to the battery for charging. The charge chip outputs the voltage towards the battery. To ensure the current is normal, the charge chip samples the voltage before and after it passes the resistor. Without the resistor the charge chip thinks there is a short and will not charge or supply power to the battery.

@JC_303 Жыл бұрын

0:58 the music is GoldenEye 64 Facility ❤

@Ewock1973 Жыл бұрын

Nice , always looking forward to a new episode.

@whodatdere1 Жыл бұрын

C54 where are you? If anyone gets that reference, you will earn a hero cookie. Also R12 appears to be just a current sense resistor. Only reason they ask for a high precision resistor is for accurate stable results.

@martinfyhn1976 Жыл бұрын

But as someone else pointed out, this is for charge current - with a 0 Ohm resistor, it'll charge with as much voltage as can be delivered, which likely will damage the battery

@whodatdere1 Жыл бұрын

@@nemesis2264 Good jorb, you earned one cookie

@trevorbrent5092 Жыл бұрын

Love this channel for just how real you are.

@Greg_Watchorn Жыл бұрын

Nice one Steve - back of the net😀

@StezStixFix Жыл бұрын

Thanks Greg! 👍

@martinfyhn1976 Жыл бұрын

@@StezStixFix Hi Steve, just to let you know, there are people here that has confirmed that the 0.01ohm resistor is for measuring charge current. It's critical that this is not a zero ohm resistor, because the chip that manages charge, will think that it's charging with 0Amps, because there's no voltage drop over the resistor, and keep cranking up the voltage to whatever maximum it can, which will likely destroy the battery - but I hope that it won't fail violently. Regardless, please replace that resistor before charging the battery again 🙏😊 (EDIT: I'm not saying this to steal credit, please give it to the person who looked up the diagram - I just worry about battery safety)

@theshuff Жыл бұрын

2:33 Never trust battery voltage with no load. It could drop to 3v faster than you think ;)

@woogaloo Жыл бұрын

What a 'gotcha' in the end. Weird that it won't even power on without the microSD card.

@xerejuneseve6333 Жыл бұрын

That resistor was for sensing the present of battery current .

@chris-pike Жыл бұрын

Good to see you fix your Odroid Go there Steve another nice fix mate 👍

@frankmeyer9984 Жыл бұрын

Gosh you had me at "Let's take it apart..." 😂🖖

@lTinyl Жыл бұрын

0.1 can be nasty! - Nice fix !!

@numberoneappgames Жыл бұрын

Good job on the fix, I can't believe how many pieces of tech have ended up in the garbage but just needed new capcitors. :D

@prw56 Жыл бұрын

My theory is that the guy who assembled this finished putting it together, then went for a bathroom break. On the way he overheard that everyone was going to get fired, so he went back and performed component surgery out of spite. That day they also fired the QA guy who would have been responsible for this, so all the items on his plate got pushed through.

@ellisgarbutt1925 Жыл бұрын

Excellent Video as always Steve

@ncross1857 Жыл бұрын

Great fix Steve. Those guys might have kept their fireworks for the end.

@Rich77UK Жыл бұрын

I miss Guy Fawkes night since moving abroad. I used to celebrate it for my kids until we were told fireworks outside of new years is illegal :( Oh...Great fix Steve. Sound like Steve Wright patting himself on the back there..."Great show Steve".

@laserrooster Жыл бұрын

The small value resistor was a shunt resistor designed to measure battery current. It might not be a good idea to charge that unit until you get a correct value resistor.

@welshtony1 Жыл бұрын

Your getting better and better and finding these faults. Cool looking machine though

@Cobalt-Jester Жыл бұрын

I have a little HH console. It looks like a Game boy that's been shrunk in wash. It plays a lot of games from Regular GB, CB Colour, GB Advance, NES, Master System, MegaDrive, Snes, N64, Game Cube, PS1, and MAME. The only trouble is the screen is tiny and a bit shit. And some games require more buttons then the system has. But it was only £25 and it came with a 64G SD card filled with over 4000 roms.

@idm8885 Жыл бұрын

Uncle Steve is doing GoDs work

@keithjackson1180 Жыл бұрын

I wonder if the R3/R4 and R61/R62 pairs were just being used as configuration jumpers.

@mike_frances Жыл бұрын

Love watching you repair then despair, Steve lol. Enjoyable viewing as ever 👍👍

@paulb4uk Жыл бұрын

Great work it lives again.

@simonlunt353 Жыл бұрын

Well done Steve 😊👍

@Raziel1984 Жыл бұрын

my fsavourite part was when you ficed that LCD connector so easily that was clearly already broken

@mrsmw2020 Жыл бұрын

Love the fireworks!! Great episode as always.

@Bo_Yaqoub_Q8 Жыл бұрын

in 3:14 on "Rockchip" the fifth and sixth from left side is " ----------- Joined together ------------ "

@13bpapi Жыл бұрын

Idk crap about this stuff but it’s so entertaining lmao. Keep up the great humor and content.

@cliffbone3430 Жыл бұрын

Goldeye looked good until it loaded fully great video

@RivetHead Жыл бұрын

You put the Boom Boom into my heart!

@douglassilva2709 Жыл бұрын

amazing video as always!! thanks Steve!!

@pacificparts Жыл бұрын

with that barrel type power plug likely somone applied way too much voltage and the 0ohm and 100uf cap gave up to protect the rest of the board

@FiveStringCommando Жыл бұрын

I own an original of the Beavis & Butthead game for my SNES. It’s proper annoying to play. If I’m wanting something to annoy me to take my mind off something else annoying, I’ll play it. I mainly keep it as a novelty.

@Bra8176 Жыл бұрын

Mate you are a great content maker, eewww I can believe I said content maker... Mate you make great videos, always make me smile, keep up the good work 😊

@Isekai_Fan Жыл бұрын

Bit of advice if you'd like, tin the pads before trying to solder the SMDs. Works so much better. Also, be free with the flux, it helps to round out the solder joints nicely.

@gravedigga71 Жыл бұрын

Glad you found your soldering shoes again! 😊

@Goludan Жыл бұрын

Can't wait to see the Retroid 5

@fernandopaul1 Жыл бұрын

R4 is a pulldown resistor. R3 and R62 seem pull-up resistors for servicing the board perhaps? R12 is a short between BAT- and ground. I wonder if anyone connected Bat+ there and R12 blew up.

@jumpingmanjim Жыл бұрын

Oh man, RIP that poor capacitor.

@StezStixFix Жыл бұрын

I'd love to know what happened to it, seems odd it would self destruct like that unless it was damaged already and popped out when the unit was dropped!?

@hugegamer5988 Жыл бұрын

@@StezStixFix I’ve designed electronic devices that are designed to be thrown and impact hard surfaces that regularly take upwards of 1k times earths gravity, small smd components like 1206 and under don’t even need potting and won’t come off unless there is a *ton* of board flex and likely many throws. When they fail from impact due to board bending, they crack a colder solder joint or crack an end often in a way that’s hard to see. Leaving both the pads and a bit of the substrate tells me it was outgassing causing an explosion likely from over voltage as another commenter suggested.

@crazyfool8594 Жыл бұрын

@@StezStixFix I do this for a living. I can almost guarantee someone has twatted it off the board when handling it, same with the current sense resistor. Likely either dropped the PCB and those components caught the brunt of it, or they've had an "oops!" moment with a screwdriver. You'll want to fit the correct value 0r01 too btw, it's how it'll measure the charge current, with that 0r link on there it'll think it's drawing a different amount of current than it actually is, unless you've got super lucky and picked one that is actually 0r01.

@digitalgord5694 Жыл бұрын

How do you plan to celebrate once you've hit 100,000 users? You're so close!

@cerd6292 Жыл бұрын

I love the raps… maybe it just me, but keep it “flowing” Steve.

@dominicputland Жыл бұрын

Fantastic work Steve!

@swilco266 Жыл бұрын

I have one of these, they were great, could even do some PSP :)

@JohnnyG10178 Жыл бұрын

Come on! Get in there!!!!

@Effect2o Жыл бұрын

Another great video as usual!! Thank you for sharing! Cant wait till the next one. Almost got all the past videos watched. Then what will I do while I wait for new ones? AHHHHHHHHH

@burnutec3 Жыл бұрын

0.01R used for current sensing , maybe part of charge or battery management circuitry.

@virgildeklerk Жыл бұрын

Nice fix of a nice device, your face when you forgot to insert the sd card was priceless 🤣 very nice device to emulate btw.

@mick0905 Жыл бұрын

That was a roller-coaster.

@randomretroplays3123 Жыл бұрын

Another great upload and another great fix 👍⭐.

@rychbrind8299 Жыл бұрын

Amazing work as always. Where did you get the little voltage reader gadget plugged into your powerbank ftom. That’s a wicked bit of kit. I’d also love to send you my megadrive 2 for an av port repair but no idea how

@yogibear2k220 Жыл бұрын

Well done on the repair, Steve. You are getting more and more like Big Clive every day.

@twotone3070 Жыл бұрын

Well, except he didn't spot the purpose of the current sense resistor, which I was surprised about tbh. It was written on the cct diag.

@yogibear2k220 Жыл бұрын

@@twotone3070 ??? If you say so. Not that I know what a sense resistor or a CC diag is. I only just found out how to change the batteries in my remote. I am glad that people with brains exist. If only I had half your knowledge I would be happy.

@twotone3070 Жыл бұрын

@@yogibear2k220 Don't get me wrong, I think Steve is great, I wish he was a mate of mine. He has ten times more screen presence than I do and I wish him every success. I know what it's like to put yourself out there to take criticism and it only takes one smart arse to spoil your day. On the point of the resistor I just thought, Oh, he hasn't looked into why it showed a resistance and why would it be zero ohms and this surprised me. No hate or one-up-manship intended, I accept my comment did read that way.

@markmullineux8671 Жыл бұрын

13:28 Sounded a bit like golem when he got those rabbits

@wherami Жыл бұрын

Someone was desperately trying to reach you on a landline the whole time lol

@DavideNastri Жыл бұрын

Amazing work, as always. Do you also offer repair / modding services?

@Sean-ct6wr Жыл бұрын

Hi, where can I get a stand like the one you have for your microscope. The stock stand is kinda short, thanks.

@okaar Жыл бұрын

He has a video about the microscopes, I don't have time to link it but I wanted to give you a hint in case Steve doesn't see this.

@Zanth123 Жыл бұрын

Nice It definitely looked like someone removed those components. maybe tried fix it but failed.

@VenomDDD Жыл бұрын

Yeah i said it before, i'll say it again. I will not skip the rap. Love that shit.

@UkdangermanRepairs Жыл бұрын

Great vid again. 👍😀

@Stefan_Payne Жыл бұрын

As Dave J. said: Though shalt measure voltages. And a Smart man once said: Electronics shall not work with no voltage! :)

@Framed-Naraht Жыл бұрын

Stupid Fireworks? Remember Remember the 5th of November, since it was my birthday, and I didn't get many presents. Not sure why the UK thinks my name is Guy Fawkes though.