I Built A Street Fighter For $577 ! WITH a V4 Engine! Restoration!

Рет қаралды 277,698

2 жыл бұрын

Many months in the making, I took a Honda VFR750 headed for death and restored to a full custom built motorcycle!
For less then $600....
Products used in the build:
Headlight - amzn.to/3blqtGS
Taillight - amzn.to/3vpwQQi
Gauges - amzn.to/3PKMAWb
Front fender - amzn.to/3Jfp15J
Handlebars - amzn.to/3BqB6mt
Rear tail/seat - Honda CBR929RR
Side fairings - Suzuki DRZ400
Primer, the good stuff - amzn.to/3vnphcO
Grey paint - amzn.to/3Jf6iqD
Matte clear - amzn.to/3OIxdME
Helmet - amzn.to/3Q7DsLj
Tip me! Say Thanks! - withkoji.com/@Sparky
Thanks for watching, there is more coming!
-Sparky
As an Amazon affiliate, I earn from qualifying purchases

Пікірлер: 316

@brentbauer8258 2 жыл бұрын

Ummmmm $577.02. You forgot your wife’s two cents

@roodick85 Жыл бұрын

Saved the whole build lol

@chrishill1507 Жыл бұрын

Lmao good call. 👍

@paullacey2999 Жыл бұрын

🤣🤣🤣

@breckinearley3128 Жыл бұрын

Eminem said his two cents are free so hers should be too unless of course she gave her ten cents

@dawnlacomis-xg6vh 11 ай бұрын

This comment is so underrated. Hilarious.

@cyclonebuzz8172 Жыл бұрын

That 525 rear sprocket is going to eat up that new chain. The difference between 525 and 520 isn't just the width. 525 has a longer distance between pins, too. The right way to do a 520 conversion is to buy 520 sprockets. Vortex and supersprox both have 520 rear sprockets for that bike for around 50 usd. You don't mess around when it comes to chains. When they break, they can cause a lot of damage or cause serious bodily injuries.

@TumzDK 7 ай бұрын

I'm pretty sure the 5-series chains all have the same pitch and roller diameter.

@neonnxs2737 Жыл бұрын

As a guy with a old bike who’s constantly looking for parts I can appreciate him saving and selling parts off of it

@reubroper1427 Жыл бұрын

yeah but it did seem like a interesting selection of what gets trashed and what's put up for sale

@dougey3192 Жыл бұрын

I'm a Marine Corps veteran struggling with addiction. I'm almost 6 months clean and you're inspiring me to build something. I've always wanted a dirt bike. Thanks for the awesome content!

@TheTexasVet Жыл бұрын

Keep your head up Devil!

@spencerchristie4000 Жыл бұрын

The devil plays in an idle mind! I say get after it!

@NikilaMoo Жыл бұрын

Well done. Go after that dream and Build yourself a bike. Best thing you can do. 15 years clean now, Never looked back. Keep busy my friend.

@allenvayner4987 Жыл бұрын

Soon, there is going to be the rapture. It's when there will be trumpet sounds, and after the trumpet sounds, God will lift his people from here. Also, God said people should be living by the Bible. Amen, and God bless you. * John 3:16 - "For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life".

@dougey3192 Жыл бұрын

@@allenvayner4987 yeah, I agree with that. But you got to recite a better verse than that one. Everybody and their mom knows that one. How well do you actually know the Bible?

@budlistar5312 Жыл бұрын

Yep, CAD= Cardboard Aided Design. Love it.

@monkonthikamandha6514 Жыл бұрын

well done, BRAVO! 101 points for innovation and 1000 points for cheap Charlie Keep coming!

@artemisdarkslayer Жыл бұрын

May have just found my new favorite build channel. Good music, good humor, and great builds.

@123mirc Жыл бұрын

I think I definitely found my new favorite build channel. :)

@beforebefore Жыл бұрын

and good cinematography!

@Brian-mp2mv Жыл бұрын

Awesome build! (came over from Bikes & Beards) Hope to see you & Sean colab on a project or two👍

@Rickd-jh7iw Жыл бұрын

Your technique for doing sheet metal is exactly like mine. Print out the flat pattern and stick it to the metal. I sometimes need to do the same thing with tubes. Split the cad model and convert it to sheet metal, flatten it, print it out and wrap it around the tubing and you have the pattern to join tubes.

@elementjoe Жыл бұрын

Your now my favorite builder on KZfaq. Great design ideas, technical ability and attitude. Thanks for not making a 15 minute video 2 hours for no reason.

@shaybell9909 Жыл бұрын

I know I'm late but I just came across your VFR "Custom" build. Sweet Mother of Jebus! $577 to make one of the best looking greatest Sports/Tourer Bikes in History look like it was built for $200 by some 16yr old Kid in Bangkok .Well Done.

@danielmori501 Жыл бұрын

Well said sir. Absolute sacrilege. Poor bike.

@DgtalBreakz Жыл бұрын

To each their own... I dont like the aesthetics either, but at least the guy revived the bike and took care of it. To me, thats all that matters.

@PumpKing96 Жыл бұрын

Yes. It doesn't even look bad from afar. And I have no problem with the idea behind this or the design. BUT the execution is just terrible! Bad spray paint and dents? - Just put stickers on em!

@lauralhildebrand4987 2 жыл бұрын

So cool! What fun this was to watch.

@kiffing Жыл бұрын

Just watched the Motobeardo from Bikes and Beards. Came to see the build video clicked another video afterward it was done and now I'm clicking subscribe cause you are entertaining as all get out. Thank you!

@qieedishmael9897 2 жыл бұрын

Amazing build and very unique. First time seeing your channel, love the work. Got a new subscriber!!

@MrJob91 Жыл бұрын

Wow the motorbeardo and the streetfighter, Some truly classic bike builds from 2022! what 2023 has on offer? This is amazing

@neilknaak 2 жыл бұрын

Wrist-orimeter .... best line of the whole video.... thanks Sparky

@willslowik7264 2 жыл бұрын

Looks great Sparky! Huge improvement for very little coin.

@SirLucien Жыл бұрын

If anyone deserved a Million subscriber channel, it's you!!

@aryank1ng748 Жыл бұрын

Can we take a minute to appreciate the music choices of the video

@kristoforf5713 Жыл бұрын

that thing turned out so sick! Nice build 🤙

@ldrfilms9077 Жыл бұрын

I personally would have loved a cafe racer build for this bike but this one is amazing too.! 😁 Awesome build, great skills, and very funny as well.🤣

@judeverge Жыл бұрын

The motobeardo build brought me here. This video made me subscribe. Cool build man!

@bewhitey Жыл бұрын

That's a fun $500 bike! I hate painting, don't have the patience for it

@fisshuman Жыл бұрын

Humble guy, cool build and awesome video in one channel. He deserves a lot of subscribers.

@billbkr32ify Жыл бұрын

Love your videos. I just came across your channel. You have some crazy skills. I look forward to more videos. Love the build you did for Bikes and Beards.

@djordjenovakovic9409 2 ай бұрын

Well done, great job, and thats really great motorcycles everyone can afford.

@Daehawk Жыл бұрын

Damn thats beautiful. Ive wanted a bike my entire life since I started out wanting a minibike when I was 8. Im 53 now and pay off my home next year. So either I try then or decide Im too old and not bother lol.

@BlackvinDiesel Жыл бұрын

Great work Sparky! Keep up the dope work! I see why Sean and the rest of the Bikes and Beards crew were so impressed! The detail

@percybrown Жыл бұрын

Love the positive can do approach! Don't buy new if you can buy second hand and don't buy at all if you can make it!

@BUNKERJR53 Жыл бұрын

Sparky, that is one cool piece of machinery. Never was a big Honda fan but I won't downgrade you or deduct any points (LOL). I'd ride it in a heartbeat. You do some amazing fabrication work my man. Glad I watched that build you did for Sean because I found a new favorite channel. Keep doing what you do brother.

@henrysanchez1647 Жыл бұрын

Bro this video has resparked my passion for working ony bike. I really appreciate your workmanship and effort to make such a beautiful build. Now I feel like I can finish mine.

@kirkwhite6578 Жыл бұрын

Bro that was nothing but awesomeness!!!!! Great work bro keep then coming! And just remember paint side up & rubber side down!!

@justinm.3594 Жыл бұрын

This is awesome I thoroughly enjoy this type of video. It’s so thought-provoking!

@laynetravis Жыл бұрын

The most fun to watch cleaning building old bike to a cool one

@boxrecordz Жыл бұрын

Very entertaining. Hats off for going for it. 😁 granted there are a few questionable “get arounds” but those will be issues you address in the process. The RC36 engine still outlives a lot of modern builds and sounds amazing. Thanks for sharing 💪

@jhook702 Жыл бұрын

Dude!! Great content!! I hope your hard work pays off man!! God speed!!!💨

@FattyTumTum Жыл бұрын

Had the same bike for years and wish i never got rid of it. One of the best bikes ive ridden from that era in my opinion

@justinbrandt419 2 жыл бұрын

Bike looks amazing!

@coyster530 Жыл бұрын

Nice job man wish I had the ingenuity

@koreanstallion Жыл бұрын

Great work! Nice video too!

@chrissalimi8708 Жыл бұрын

The "Sketchy Way" is the only way 👊

@bernonic Жыл бұрын

really fun project - great ideas and execution

@jason-oh6qr Жыл бұрын

Very nice! I've got a new to me 98 vfr and I can't find parts hardly at all! I know they are out there but very good at hiding. Keep up the awesome work!

@Ariautoace Жыл бұрын

The last part when he was changing gears. Love it.

@07D675 Жыл бұрын

Nothing better than a screamin' V4

@DrMurdercock 9 ай бұрын

7:31 Ronnie Mac would be so proud of you for that one!

@loganerwin9654 Жыл бұрын

Great video thorough description links you're a Savage

@xpndblhero5170 Жыл бұрын

That is such an awesome bike, I'd love to start doing something like this but I'd most likely be doing electric conversions..... 😁

@danieldougan8550 Жыл бұрын

Dude your channels about to go viral, you got mad skills and a great heart given that last like away

@Thejayfrancis Жыл бұрын

Dude, awesome build! Love your channel.

@torent40 Жыл бұрын

Awesome video and cool build, man! Hope the algorithm picks it up, you deserve it! 🏍🏍🏍

@Kplatt3 Жыл бұрын

Those vfrs have some kick. The v tec is so crazy too

@hdtwista3692 Жыл бұрын

Found this channel from the moto for bikes and beards and loving it

@DetroitMicroSound Жыл бұрын

You have a great channel here! Keep it up! You also have great ideas!

@StewsChannel 3 ай бұрын

That's pretty dang cool! Looks like a lot of fun 👍

@alexv4046 Жыл бұрын

This is amazing, incredible job!!

@kyussdemon1 Жыл бұрын

Thanks to Bikes and Beards for bringing me to this channel. New sub, and loving the content. Just wish you were my neighbor, lol.

@mauricioramirez1456 Жыл бұрын

Awesome build, you make me want to do one, then I remember I do not have the skills or patience!!! Great job!!!!

@bobtheman4500 Жыл бұрын

Cool build! Great way to get a classic honda back on the road!

@boxcrashmfg9420 Жыл бұрын

I love it, true garage build. turned out pretty darn good!

@brianmusfelt1077 Жыл бұрын

Dude this is the coolest build ive ever seen. Keep at it you got some real skill man. You should put your vids on facebook

@TazawaTanks Жыл бұрын

RIP Jim Lindemann. He was a super nice guy…he used to work on the suspension of my race bikes.

@tfconstruction5969 Жыл бұрын

Looks bloody awsome man top notch transformation

@joseluisnunez7714 Жыл бұрын

You are extremely talented! My dear friend! God bless!

@bassam2433 Жыл бұрын

You are thoroughly likeable my friend. +1 subscriber and regular watcher (from here on out). Can't wait to see more!

@DaytonCarCare Жыл бұрын

Had a 91 VFR750 that was red but in mint condition. Have a 01 Triumph Speed Triple 955i now. Looks alot like your bike is set up like a street fighter even single sided swing arm. They came stock that way

@userout8446 Жыл бұрын

I love your energy bro i subscribes just after watching 2 minutes of the videos + u did a great work here u made a real beast thanks for sharing this masterpiece building with us

@SR_71XX Жыл бұрын

Stunning buddy ...love it

@bobbylandicho3868 2 жыл бұрын

Awesome im so envious, still working on bike for two weeks now as i couldn't get to rev up

@JOHNCXLE Жыл бұрын

The memories of that b roll footage at the end, those twistys on T S Road were my favorite on my CBR. Also love the channel great content.

@blissisland7680 Жыл бұрын

Great channel and content, just subscribed .

@govnor1495 Жыл бұрын

Awesome. I just wish I had seen this in my 20s.

@stephenvalle6854 Жыл бұрын

Subscribed! I am happy with the build. It makes me want to build another scrambler bike.

@r1kelvee153 Жыл бұрын

Very cool enjoyed watching this

@WarrensAdventures Жыл бұрын

Ok, some parts of that build were a little sketch, but end result was AWESOME. Especially for the cost. I “built” a street fighter out of an 05 GSXR and i regret selling it to this day…

@bigdadgigachad3042 Жыл бұрын

Incredible job 🔥🔥🔥

@arthurwachnik8700 Жыл бұрын

My favourite new channel.

@0shiny1 Жыл бұрын

Best bang for the buck I've seen great job ! I subbed !😉 BTW my mate has an R6 with a very similar look/theme, his was more RAF, however... I think he spent a fortune on just the air brushed bullet holes and rivets. 😜

@SlightlyLessFat Жыл бұрын

Bad ass dude! Crate it and ship it to me! Ha-ha!

@2cool4spool16 Жыл бұрын

Man this is awesome!

@nickinfamous1 Жыл бұрын

You're too cool, love the bike! Awesome project

@costofexpansebrain8025 Жыл бұрын

Mama told me, "if you have nothing good to say don't say anything at all"

@ryanbox30 Жыл бұрын

Dude! You forget one of the best parts, the forkbrace. I would definitely put that back on purely for the improvement it makes on handling

@OakInch Жыл бұрын

Awesome job. That looks great! People who see that, without knowing what you started with, are going to wonder why you cut up and shot a perfectly good bike.

@brendon7861 Жыл бұрын

Great budget build an on point mate 👌

@mustangnotch Жыл бұрын

Great build another subscriber.

@wyatts3rdchannel404 Жыл бұрын

Bro im just impressed!...luv how you take the ghetto out of ghetto fabulous...lol...jp...fr though you got some mad skills...luv it..🤙🏾🤜🏾🤛🏾🔥

@henriknordeng Жыл бұрын

Love the build :)

@that_frog_gamer Жыл бұрын

Love that jump cut for the clutch I thought it was funny

@ryonflaming1255 Жыл бұрын

Wow! Amazing!

@lovetoflylovetofly3843 Жыл бұрын

Looks sweet!

@eric62backstrom Жыл бұрын

nice work!

@ArtVandely85 Жыл бұрын

cool project!

@banjominer9682 Жыл бұрын

i had the hawk 650 with same frame..awesome bike to putt around on

@TravisTerrell Жыл бұрын

I'd love one of these bikes, just for that unique engine. I don't see them often in my area, and not for very cheap. Maybe if one ever pops up with 110k miles... 😆