I built the mini Electric Supermoto Razor never did... [72v e-bike mods]

No video

I built the mini Electric Supermoto Razor never did... [72v e-bike mods]

Рет қаралды 35,959

Күн бұрын

Today we modify moto moto to be a 72 volt electric supermoto!! Lots of mods went on the bike, and finally the e-bike is ready to rip, fully transformed from a mini pit bike into a mini super moto build.
If you're interested in surrons, modified razors, and fast e-bikes, make sure to subscribe for more :)

Пікірлер: 128

@logan-taylor Жыл бұрын

As promised, here are my links for everything in the video!! Supermoto tires: amzn.to/3jyyP1R 4-piston brakes: amzn.to/3C5OYlB Vinyl wrap: amzn.to/3C7JhDY Pro Taper bar pad: amzn.to/3hRgGvN CRF50 Seat (requires major modification + reskin, will not fit directly): amzn.to/3PY1rxn Grippy seat cover: amzn.to/3GnOI42 Bleed kit (highly recommended with these brakes): amzn.to/3VqPpOb Extra mineral oil: amzn.to/3WxZBG7 If I missed anything let me know and I'll update this list!

@user-rw1lr6fz1p Жыл бұрын

What is the major modification? On the seat

@logan-taylor Жыл бұрын

@@user-rw1lr6fz1p I show it a bit in the video, but you have to take apart your stock seat to get the plastic “seat tray” on the bottom. Then remove the foam from the CRF50 seat and glue that to the Razor seat tray, then recover everything with a new seat cover

@On_SightTV Жыл бұрын

THANK YOU!!!

@southpolesavior Жыл бұрын

You missed the rubber grips I think I don’t know but this video inspired me to try and build my own moto moto

@tristendecker5824 8 ай бұрын

Definitely needs some crf50 protaper bars

@69Savage. Жыл бұрын

Next upgrade should be the suspensions and the handle bars. I can’t stop watching your videos bro. Stay safe and keep rockin!🫡🙏🏻

@logan-taylor Жыл бұрын

thanks so much!! Working on something new for the suspension now that nobody’s done yet (to my knowledge)

@dehibler4811 Жыл бұрын

@@logan-taylor Electro & Co started making their own front forks. Bought some myself, and it's a game changer. Definitely look into them!

@FinnEditzXD 2 ай бұрын

thanks for the build literally ordering exactly what you did.

@evancleary6799 Жыл бұрын

Keep the vids up! I’m building exactly what your building and all I’m waiting on is the battery so I’m super excited to hop on it

@logan-taylor Жыл бұрын

heck yeah you’re going to love it!! Thanks man

@SuperSickNerd Жыл бұрын

I have 3 mx350s , I really need a sx500 mx650 I actually bought 2 mx350s together for $10.00. Beautiful build.

@k_beatyou_init1106 Жыл бұрын

Since your building one was it really 600$

@dr.projectx5142 Жыл бұрын

Ended up getting a pocket mod miniature and added a 72v 3000w motor and a 9ah battery. Still balancing the battery pack and still need to secure the motor properly. The battery can do 100 amps and at 80v it's going to be insane once it's completely. Great video bro had a good time watching it.

@logan-taylor Жыл бұрын

pocket mods are so sick!! Can’t wait to see that finished it sounds like a great project

@dr.projectx5142 Жыл бұрын

@@logan-taylor got it at a estate sale for 35 bucks. At first I used a DC to DC to convert 12v to 24v 400w converter step up booster. It went 11 mph. Not sure how fast it'll be once it's upgrade.

@ConnorGMedia Жыл бұрын

Dude I FINALLY finished my 76v build and have already posted a few videos on it. It's...INSANE!! Way too much fun!

@logan-taylor Жыл бұрын

hell yeah!! I’ll check it out now dude that’s awesome

@ryanhedlund1830 Жыл бұрын

Love to see a video of your CRF 50 seat install. I did the CRF 50 seat on the MX500 and thinking about doing it on my SX but always heard its doesn't fit. I figure it needs mods but it looks clean here.

@logan-taylor Жыл бұрын

thanks! I should have made that part more detailed, just didn’t want to bore people haha - essentially you just deconstruct both seats, put the CRF50 foam on the SX500 seat tray, add a small sliver of the SX500 foam at the back to fill in a small gap, then rewrap everything!! Next time i’ll make a dedicated video on that

@PatOutdoors Жыл бұрын

Looks awesome dude!

@logan-taylor Жыл бұрын

thanks b 🙏

@andrewpotterdoty Жыл бұрын

I’ve thought about a full crf 50 seat/ plastics upgrade, but I haven’t been able to find anyone whose tried the seat. Thanks for that! Would definitely like to see the process for the seat.

@logan-taylor Жыл бұрын

totally, it would work with lots of mods! Alternatively, if you have an MX500 or 650, CRF seat and plastics should fit directly - Razor tried to make everything compatible.

@andrewpotterdoty Жыл бұрын

@@logan-taylor I’ve got an MX650 and an SX500, I was hoping to throw the E&C 11kW on the SX, and the 5kW on the 650. I like the same sized wheels for the SX and wanted to mini-supermoto it. Was hoping I could mod the CRF 50 seat to fit easily.

@ConnorGMedia Жыл бұрын

Looking fresh bro!!

@logan-taylor Жыл бұрын

thanks man!!

@TURBOMOOSE Жыл бұрын

Bro. Ima need help on the settings for the Kelly. I went 72v yesterday so now we really twinning lmfao. I don't have low end but my mid range and top end is crazy. Hit 46 last night lmao on the new street tires. Loving the progress on your build though homie!

@logan-taylor Жыл бұрын

ooh congrats! Did you get a stock Kelly or one with a tune? For what it’s worth mine felt sluggish at first but that was just a throttle sensitivity thing compared to the psychotic Amazon controller lol. Do you have a cable/PC?

@TURBOMOOSE Жыл бұрын

@@logan-taylor yeah I had my Kelly tunes for my 48v previous setup. I have the Bluetooth adapter and the app on my phone to change settings

@Windspin 10 ай бұрын

Dude I’ve been up since 11 pm and it’s 5am…I’m only still up cuz of ur vids 😂

@ButteredUpToast Жыл бұрын

Looks so good. Been waiting for my front sx500 wheel to show up to make my mx650 a supermoto

@logan-taylor Жыл бұрын

yessss good choice - love the spoked wheels over the machined RSF wheels everyone does. Both look sick though.

@enlightenedindividual5098 Жыл бұрын

hey im about to buy the kelly kvd controller but what is the difference between the plug and play and the pretune?

@landonbohnstedt2583 Жыл бұрын

I am building on right now. What should I use a 72 full battery and 60 V?

@logan-taylor Жыл бұрын

i would say go for 72v over 60 - both are more than enough for these bikes, but 72v allows you to run more power at lower amperage which is helpful. Also, you’ll always want more power so might as well go 72v :)

@landonbohnstedt2583 Жыл бұрын

Ok thanks

@evancleary6799 Жыл бұрын

How much range do you get? If you don’t know you should make a range test video

@logan-taylor Жыл бұрын

that’s a great idea! I honestly don’t know, thanks for the inspiration

@landonbohnstedt2583 Жыл бұрын

That looks sick I want mine to look like yours

@logan-taylor Жыл бұрын

thanks man!! It’s not too hard to do honestly, you should go for it

@Toxicmasculinity69 Жыл бұрын

We already know what you gotta build next mate, build a trailer for your dog!

@logan-taylor Жыл бұрын

YES bro i’ve been thinking about this for a couple months haha

@wshaythomas88 Жыл бұрын

Dude that thing is too pimp. Love your content! Tinker with more shit we will watch 😂

@logan-taylor Жыл бұрын

hahaha i got a lot coming up don’t worry

@indyfilms01 6 ай бұрын

what state are you in? Those buildings are insane! youre lucky to ride in such a nice place

@zacthirkettle 7 ай бұрын

hey, man just wanted an opinion since my build colour is gonna be glossy black and chrome gold. do you reckon it would look nice if i painted the rims chrome gold? or keep it normal colour thanks.

@PatOutdoors Жыл бұрын

What fluid are you using for the brakes and what bleed kit did you use?

@logan-taylor Жыл бұрын

Just dropped all the affiliate links above - I'm using the same mineral oil that came with them, it's a Shimano type of oil (but not actually shimano lol). Since re-bleeding them everything's been solid but time will tell

@dabocket445 10 ай бұрын

i love it!

@MotoAlias Жыл бұрын

You need forks and a longer rear shock to loft the bike a little

@J.Sanchez36 2 ай бұрын

How quick is this beast?

@user-cz8dq2ex4g 8 ай бұрын

i accidentaly bought the 48 volt controller 2000w and motor from best equip but i have the 72 volt battery will it still work

@c.ccream350 5 ай бұрын

This bike has a btr 72v battery and 72v 3000w vevor motor right?

@user-rw1lr6fz1p Жыл бұрын

what is the link to the seat?

@logan-taylor Жыл бұрын

Just updated all links in pinned comment above :)

@evancleary6799 Жыл бұрын

For the supermoto tires can you use the stock tubes? Or can you just put them strait on like a normal tire

@logan-taylor Жыл бұрын

The stock tubes might be slightly too small but could still work. I just purchased new 10 inch pit bike tubes on Amazon that are rated for that tire width :)

@prestonmicheal1963 Жыл бұрын

Hi I have a question about the super Moto tires, So do I use the same tire for both front and back and my other question is did you have to do any modifications to fit the wheels or was it just a direct fit?

@logan-taylor Жыл бұрын

same tire front and rear! No mods to the wheels, just the stock 10 inch SX500 wheels with the new tubes and tires mounted :)

@annajoanna6653 Жыл бұрын

Red like your shoes

@logan-taylor Жыл бұрын

red for the bike color??

@annajoanna6653 Жыл бұрын

@@logan-taylor yes

@YLN_AGLET Жыл бұрын

man they look look so funa dn cool to build i really want one

@logan-taylor Жыл бұрын

they really are - go for it !!

@beatdownjar 11 ай бұрын

How much do you think you’ve invested in this build so far?

@bryson6122 Жыл бұрын

hey man i’ve been thinking about getting a surron then decided to get a razor and mod it, was wondering if i should get the electro and co kit or do what you did, i have no idea what i’m doing with electronics fyi

@logan-taylor Жыл бұрын

Definitely electro and Co kit if you have the money saved - doing it yourself will take a ton of trial and error (you can see in my videos it took forever to figure out wiring & get everything working). If you like that challenge of learning as you go, then DIY could work, it’ll just be a big project!

@kalvinbecker7942 Жыл бұрын

giving me nerf or nothing vibes but looks sick

@logan-taylor Жыл бұрын

hahaha

@dannydanny9875 Жыл бұрын

Logang 4 Life !

@logan-taylor Жыл бұрын

yeeessss

@lockservice6965 Жыл бұрын

Hello how did you ever fix the throttle being super sensitive when you first built the bike? Mine currently does that wwith the same kit you had originaly

@logan-taylor Жыл бұрын

it’s mainly a controller issue unfortunately :-/ just make sure you’re running 5v through the throttle not 12, that can make the sensitivity really dangerous. I upgraded the controller to a Kelly KVD and that helped sooo much without being too expensive

@bj97301 Жыл бұрын

Link to new brakes?

@logan-taylor Жыл бұрын

Just pinned a comment with all links!

@bj97301 Жыл бұрын

Got it. Thank you. You might consider putting them in the description as most people tend to look there first. Nice work on the bike and video btw ❤

@logan-taylor Жыл бұрын

@@bj97301 thanks!!

@2jsCustomZ Жыл бұрын

Sweet bike 💯

@Sendz_Sur 9 ай бұрын

how much did this build cost

@uniquemcduffie6171 Жыл бұрын

What spray did you use to get the seat cover to stick to the foam padding?

@logan-taylor Жыл бұрын

I just used a tiny bit of 3m contact adhesive! It’s popular at hobby stores and stuff - you only need a tiny bit though, the staples are really what holds it together

@SuperSickNerd Жыл бұрын

Can you make a wiring tutorial for beginners. What supplies you all need. Don’t you just strip the wire and add connectors.

@logan-taylor Жыл бұрын

That’s a great idea - I wrote this down for a future video as I get a lot of questions about this, I’ll do my best!

@Riddick_4506 3 күн бұрын

Whats the music?

@robertdeener7220 Жыл бұрын

Do you not get bothered by the cops when riding in the streets? I'm picking up a SX500 in a few days and that's the only thing I'm worried about.

@logan-taylor Жыл бұрын

i haven’t yet, I think people tend to see it as a toy. But it totally depends where you live, cops like to hassle people about bikes in certain areas

@robertdeener7220 Жыл бұрын

@@logan-taylor fair enough. There are a few Honda Ruckus’ that drive around my town and they seem fine.

@uniquemcduffie6171 Жыл бұрын

Ahaha didn’t notice until now but motomoto is the same color as your 100% goggles it looks like

@logan-taylor Жыл бұрын

I just noticed that too haha thanks for pointing that out

@uniquemcduffie6171 Жыл бұрын

@@logan-taylor gotta love doing things on accident

@SuperSickNerd Жыл бұрын

What’s the top speed ? Any trouble with the cops yet ?

@logan-taylor Жыл бұрын

I think maybe now is somewhere around 40mph, but feels waaaay faster and gets there stupid quick. No trouble with cops yet but it’ll happen eventually, just a matter of time! I just keep my head on a swivel haha

@SuperSickNerd Жыл бұрын

I’m Working on a mx350 at the moment , technically for my kid but he’s only 5 😂. So I still got at least 4 years before he try’s it out.

@logan-taylor Жыл бұрын

enjoy those 4 years my friend

@chucke_chez2873 9 ай бұрын

dont pump the brakes with nothing inbetween the pads

@Totalyforgor Жыл бұрын

I’m trying to do the same but with a razor mx500 . Btw how fast can it go?

@logan-taylor Жыл бұрын

i think right now moto moto tops out around 40mph, but it feels a lot faster haha

@brandonseverson8873 6 ай бұрын

Need forks now

@IceeSnipes Жыл бұрын

Can you link the brake light?

@TattedTommysTv Жыл бұрын

What is those wheels bruh

@poopybuttlegs Жыл бұрын

can you help me find a way to fit a crf50 seat onto the razor? i’m confused

@logan-taylor Жыл бұрын

you’re going to have to remove the stock cover, peel off the plastic seat pan (the bottom plastic part) then do the same thing with the CRF50 seat and just use the foam from the CRF50! It’ll require recovering the seat but it’s sooo worth it

@poopybuttlegs Жыл бұрын

@@logan-taylorwhat’s your instagram. will you explain it in detail. sorry i just want to know so i don’t screw it up

@logan-taylor Жыл бұрын

@@poopybuttlegs totally! @loganandrewtaylor i’ll try to respond ASAP :)

@justindenicola5202 Жыл бұрын

What is top speed?

@Vincenzo_Delio 2 ай бұрын

@mc.yohann 2 ай бұрын

Like 40 or so

@Sahil_Patel825 Жыл бұрын

Can you link the plastics

@logan-taylor Жыл бұрын

they’re just stock SX500 plastics with a bit of trimming on the rear :)

@user-ep4jv5nx1y 2 ай бұрын

PLEASE PUT ON A WHITE NUMBER PLATE

@jamesjun5515 Жыл бұрын

Can you give me a link for your battery?

@maukaman Жыл бұрын

What frame is this?

@logan-taylor Жыл бұрын

Razor SX500! It’s the best Razor frame imo :)

@maukaman Жыл бұрын

@@logan-taylor right! I realized that’s probably what it was after commenting. Yeah I like the look of those little bikes, the frame actually looks alot like the little mx350 frame but with suspension added as an afterthought. My first razor mod was an insanely fast mx350 I threw together. Now I’ve got an mx650 I’ve been working on but I still look over at that awesome little mx350 frame fondly because it just looks so cool