I Cast My HEAD In SOLID BRONZE! - Metal Casting Art At Home

Рет қаралды 19,122

11 ай бұрын

In this video I will be metal casting my own head in solid bronze. To start, I had to create a 3D model of my head. After that, I 3D printed my head using polycast castable filament. I then made a plaster mold of it with investment plaster and melted out the wax filament. I melted down some scrap bronze I had laying around and poured the molted metal into the plaster mold. I cleaned up the bronze head bust removing any print lines and then polished it to a mirror finish. This did take quite a long time to sand down and clean up any imperfections, but once done, I was left with a mirror polished sculpture of my own head. If you like this video, please give it a thumbs up and hit that Subscribe button for more.
If you'd like to see something made, leave a comment and let me know.
Thanks For Watching!
#bronze #metalcasting #art
******GRAPHITE MOLDS********
To purchase the graphite molds as seen in my videos, visit my website at www.ArtByAdrock.com
TOOLS IS USE IN MY VIDEOS
******Rotary Burs*****
amzn.to/410R54d
******Sanding Discs*****
amzn.to/438jQy0
******Vevor Wire Stripper*****
amzn.to/3CGicHf
******Digital Thermometer*****
amzn.to/3RAhzoG
******Polycast Filament****
amzn.to/3uWCGc7
******Wax Carving Pen*****
amzn.to/3MmyUyR
****Get Pure Aluminum Here*****
www.weldmetalsonline.com/?ref=...
Save 10% with coupon code "ADROCK"
****Devil-Forge*******
www.devil-forge.com
*****GTHIC RINGS*******
The Rings I'm wearing are from bit.ly/38YOy06
Save 20% with Discount Code "ADROCK20"
***GLUE***
Save 15% by clicking on the link below
Starbond Glue - www.starbond.com/?rfsn=327773...
******MERCHANDISE********
Merchandise is available in my TeeSpring store as well. Help support my channel by picking up a T-shirt and more!
teespring.com/stores/artbyadrock
***DISCLAIMER****
This video is for entertainment and educational purposes only. Do not try and replicate this at home unless you know what you are doing. Molten metal is extremely hot and dangerous so always use precaution and wear protective gear when melting metal.
****SOME OF MY OTHER VIDEOS****
Casting A MINI Copper Darius Axe From League Of Legends(X2) - Turn Scrap Copper Into Art - • Casting A MINI Copper ...
Casting A Solid BRONZE Katana & Ingot From Scrap Copper And Tin - Monster Bronze Melt - • Casting A Solid BRONZE...
Melting Aluminum Cans At Home - Easy DIY Recycling Process - • Melting Aluminum Cans ...
Casting Mulan's Sword From Scrap Aluminum Ingots - DIY Metal Sword Making - • Casting Mulan's Sword ...
Melting Copper Pipes Into A BRONZE Black Prince Dagger - • Melting Copper Pipes I...
Bullets To Blades - Casting Double Mini Blades Of Chaos (God Of War) - • Bullets To Blades - Ca...
Aluminum Casting Aquaman's TRIDENT - • Aluminum Casting Aquam...
****SOCIAL MEDIA LINKS****
Facebook Page: / artbyadrock-6566854246...
Instagram: / adrock_702
Twitter: / iamadrock
Website: www.artbyadrock.com

Пікірлер: 89

@ArtByAdrock 11 ай бұрын

Hey everyone, I hope you all enjoy this video! The first try didn’t work out as well as I planned but that’s ok. There’s a few things I should have done differently but I’ll save that for a different video. Overall though I’m quite happy with how the bigger one turned out. If there’s something you’d like to see me do, let me know. See you all in the next one and have a great weekend! 👋🏻

@TechneMoira 11 ай бұрын

Magnificent bust. One of your best pours to date... your technique has certainly improved. This bust could certainly be regarded as artistic

@user-se9tu7mh2t 24 күн бұрын

❤great thanks

@Bekir816 10 ай бұрын

perfect

@June28July 11 ай бұрын

Very cool 😎

@frikkiesmit327 8 ай бұрын

Nice

@kevinbray3724 11 ай бұрын

Looks like Imhotep from Brendan Frasier's Mummy. Nice Job!

@JohnnySwedishScrapper 11 ай бұрын

woooow that whas an great job and melting ;)

@luxordeathbed 11 ай бұрын

I was expecting a life size one.... NECK PRoJeCT!!!

@stevenormandin2059 5 ай бұрын

that would make a NICE hood ornament :)

@jasondillard254 2 ай бұрын

Dig it.

@JsStack 11 ай бұрын

Great pour!!!

@travismorton9857 11 ай бұрын

Wow looks great sir. Nice details in it.

@taftancastingchannel 11 ай бұрын

بسیار عالی بود

@stevenyoung7394 11 ай бұрын

Adam the "Man of Bronze"

@tittiesandpasta 8 ай бұрын

You should make a bunch and give them to your family during Christmas and birthdays. Would be funny.

@ArtByAdrock 8 ай бұрын

They got the 3D printed plastic ones 🤣

@tittiesandpasta 8 ай бұрын

@@ArtByAdrock Haha nice

@StingerBeeCo 11 ай бұрын

haha that turned out to be pretty cool!

@faramineuzefotos2975 3 ай бұрын

Is that massive/solid, I mean not hollow? Quite a risk, knowing how bronze shrinks! Good for you,man!

@doriWyo 11 ай бұрын

Talk about a chrome dome!

@awldune 11 ай бұрын

If you know the band The Mars Volta, this head reminds me of one of their album covers 😀 Awesome job polishing it up, it's great there was no porosity issue.

@ArtByAdrock 11 ай бұрын

That’s funny you said that. My brother said the exact same thing 🤣

@ChadLee1973 11 ай бұрын

Looks great! Nice job!

@ArtByAdrock 11 ай бұрын

Thank you

@jasonfarris4766 11 ай бұрын

Absolutely great your vids are top notch

@whatthefunction9140 11 ай бұрын

Forbidden pancake batter

@charitybrown4274 11 ай бұрын

Awesome job 👍

@sdunca4864 8 ай бұрын

As always- fun video- looks good from here- one point to consider- with your layer lines- get a UV flashlight and a jar of UV curing resin from elegoo- Post process your 3d print by simply Panting a layer of UV resin on your master and cure it with the UV light- fills in the voids and eliminates a large reason for your surface bubbles/voids- smoother finish and you can sand back if needed. Get a dark resin to contrast your white print so you can see the areas you filled. Looking good! Keep it up

@terry.jamesrobert 11 ай бұрын

Verry nicely done.

@ArtByAdrock 11 ай бұрын

Thank you 🙏

@SkullerMetals 11 ай бұрын

Looks great!

@Dean_F 11 ай бұрын

Great video! The vacuum chamber is awesome! I haven't seen that done before. If you ever get bigstackd talked into a weekend in Vegas let me know! I don't live there anymore but I grew up there. Anyways great job on all of your content. You're a new age Tinkerer and we all learn so much from you.

@ArtByAdrock 11 ай бұрын

Thank you 🙏 One of these days I’ll get him here. First he needs to stop making 890,927 hour long videos so he can get ahead 🤣 We joke about that all the time.

@Dean_F 11 ай бұрын

@@ArtByAdrock I'm sure it's not easy for either of you. But I sure do enjoy your content and one day hope to transition from selling toys to casting and maybe playing with 3d printers haha. But anyways take care and love what you do!

@bigpapa3708 10 ай бұрын

@ArtByAdrock I just found you, I've been watching bigstacked for years. I definitely enjoy his long videos, allows me to play games or design w.e I'm doing with a nice long video lol. Seems you do a bit more that I am very interested in

@nahkanukke 3 ай бұрын

Nice one. 🗽

@irishrepub84 10 ай бұрын

crazy sick

@Pablo668 11 ай бұрын

Awesome work. The casting medium can pick up incredibly small features. In Jewellry circles at least, they get the finished wax piece up to as good a polich as you can. After casting the finished pieces only have to go in a tumbler for a while to comeout looking good/polished. Or close to it at least.

@velcrodreams178 11 ай бұрын

Great work dude !

@Metalstacker 11 ай бұрын

You did a great job Adam:)

@ArtByAdrock 11 ай бұрын

Thank you

@roberta.brokaw3829 11 ай бұрын

Stay safe.

@bellowsforge9726 11 ай бұрын

That would make a great shifter nob for a car

@ilikelamp718 11 ай бұрын

Was it weird looking at and polishing your own head??? Love the video!

@drkahara 9 ай бұрын

Hey there, Adrock. ARE YOU AWESOME OR WHAT?

@shannonallen2508 8 ай бұрын

nice but would like to see a life size pleas

@captainjerk 11 ай бұрын

Sweet! It came out awesome! I should send you some wax skulls to work with! I know you would rather work with PLA, but I have wax! LOL Thanx for a great vid Adam!

@ArtByAdrock 11 ай бұрын

Thanks buddy! I prefer wax 👍🏻

@captainjerk 11 ай бұрын

@@ArtByAdrock SWEET!

@Nobe_Oddy 11 ай бұрын

that turned out BEAUTIFUL!!!! WOW!!! Maybe you could do some 'famous' or 'recognizable' heads around the same size and have a bit of a collection... maybe Batman, the Terminator (where half his skin came off and you can see the metal skull and red eye... and you could glue a bright red garnet for the eye), Deadpool, and Ironman all come straight to mind.... but I know you would come up with some better heads than my obvious ones.... but MAYBE you need to build a little more shelf space LOL ... your collection is gettin a bit big for that shelving LOL (thats a GOOD thing) :)

@daleorthman 18 күн бұрын

That is aluminum bronze right? 89% copper and 11% aluminum? Great job!

@noviceartisan 10 ай бұрын

I like the stopgap of the acrylic lid till you managed to get a steel plate made to fit. Was a pain making mine, had to use drill to cut out the rough shape then grind it out with the anglel grinder and a bunch of burrs loll Reminds me I need to go at it with the burrs again, as when casting bronze the steel flask swells so much it's not an easy fit into the rather tight fitting hole i made. Next one I make, I'm paying the extra for a plasma cut steel round with the right sized hole in it from start.

@kapitanleutnant1 10 ай бұрын

Nice, I'm thinking of casting my lost wax cast of the naked twi'lek from Star Wars someday using the 3D resin print of the twi'lek as a negative mold for the silicone positive mold for casting wax for the investment mold

@GreenStreak-tt1mc 5 ай бұрын

Iron man ripoff: Btw (Amazing job!)

@PlanetParasite 10 ай бұрын

Beautiful work! Just getting into bronze casting and the larger bust turned out flawless imo. Do you think it would be possible to make an animal in a cage in 1 cast?

@ArtByAdrock 10 ай бұрын

Thanks. I think so, you might need to add some additional sprues though depending on how the animal is in the cage.

@vicferrari9380 10 ай бұрын

❤🎉

@j0hnf_uk 11 ай бұрын

I like the idea of doing a full chess set. The 2 sets of pieces being in bronze, brass, copper or aluminium.

@ArtByAdrock 11 ай бұрын

That’s the plan, it’s slowly been a work in progress. All the molds are almost finished though at least.

@beowulfstreasure9523 11 ай бұрын

I agree, I would love to make a chess set myself. Not a lot of options for molds out there but I’m Bob start saving my money.

@chrismorris5565 11 ай бұрын

You should have well made a full mini 3d statue of yourself instead of just your head, great job though, looks fantastic 👍🏻

@ArtByAdrock 11 ай бұрын

I need to reprint it first as I broke the arms off removing the support. Oops 🤦🏻‍♂️

@chrismorris5565 11 ай бұрын

You live and you learn 🤣 great job with the head though, it turned out looking awesome 👍🏻

@buttpuppetjohnson2371 8 ай бұрын

That turned out great. What are you using to polish for a brilliant shine?

@ovalle7775 11 ай бұрын

Who would you suggest to get custom silver and gold bars made?

@leemiracle6840 11 ай бұрын

Hood ornament.

@honthirty_ 11 ай бұрын

Or gear shift knob.

@konstantinosgnaf 4 ай бұрын

did you do any burnout cycles to the plaster mold? or you poured the metal just after all the wax was gone?

@dracothewarrior4316 11 ай бұрын

now do a life-size version!

@armarmo964 5 ай бұрын

Nice job, how is it the bronze does not oxidize?

@bartcubbins3528 11 ай бұрын

It was so shiny it looked like there was a parting line 🤩😎👏🤣 please do a action figure!!! I've been working on a couple but am having trouble doing the whole lost wax molds. (Cutting the silicone 😵‍💫) ...and sand can be tricky .... especially in the "crevices "...

@bartcubbins3528 11 ай бұрын

Can't wait to see what's next!! and those chess pieces look great from the pours 🧐🤔👍 as always Melt Happy & Pour Safe my friend !!!🤘😎🤙

@ArtByAdrock 11 ай бұрын

How are you making the mold? If you do it in 2 parts, you shouldn’t have to cut the silicone

@bartcubbins3528 11 ай бұрын

@@ArtByAdrock silicone - yeah I agree ! (Will do that next time) it worked ok the first few times but the wax I was at first to brittle and arms and legs kept breaking ...then I tried using a wax injector (first time using one)with a different wax and when my girlfriend and I tried to remove it the hands came out at a bad angle I guess and tore the mold...😵‍💫🙄 It's a shame because on the first attempts we had bubble issues but practically invincible parting lines .... Otherwise I've done a few small sand casts with varying results (venting the hands and feet can be tricky in my small flask) but I do now have a tiny copper Ninja Turtle that lives in my pocket ;) 🤙 and one in homemade tin bronze that I still need to clean up

@whatthefunction9140 11 ай бұрын

Make a full sized head

@jamesnichols7583 11 ай бұрын

I want to see that chess set

@theaustinwilliams1 11 ай бұрын

I like your investment furnace thing. Whats that called? do they come in a larger size?

@ArtByAdrock 11 ай бұрын

It’s a kiln. They come in all sorts of sizes 👍🏻

@theaustinwilliams1 11 ай бұрын

@@ArtByAdrock Ive never seen a vacuum version. Ive just used tar paper and chicken wire for my investments. what brand is yours?

@docvencil2222 6 ай бұрын

Where did you acquire your chess piece molds?

@vladim473 11 ай бұрын

Like for the chess👍

@docvencil2222 6 ай бұрын

How did you get the 3D print of your bust?

@ArtByAdrock 6 ай бұрын

I make everything myself. I have videos that show all that 👍🏻

@docvencil2222 6 ай бұрын

@@ArtByAdrock do you use a 2D to 3D program

@ArtByAdrock 6 ай бұрын

@docvencil2222 no, for this I used my my 3D scanner and then refined it in blender.

@walter2990 11 ай бұрын

I'm early! Its my experience..., that everybody wants, or needs a little head. Just a thought.

@MikeG-js1jt 8 ай бұрын

Looks more like brass....

@Autisticguywithacamera 11 ай бұрын

So cool! Reminds me of Tom Morrow from Innoventions. Did you ever go there in Disneyland?