I fixed the Predator swapped ATV!!! It RIPS!!!!

No video

I fixed the Predator swapped ATV!!! It RIPS!!!!

Рет қаралды 16,348

Do It Yourself Dad

Күн бұрын

Пікірлер: 38

@yvngfry3580 4 ай бұрын

I just started this project! I am going to try to use yours as a reference. Awesome video!

@GriddleMeThis 2 жыл бұрын

My kids ATV is basically the same ATV. The 110 motor blew Last week and I did the same swap but kept the stock sprocket on the rear. I made a spacer so the drive pulley on the torque converter won't fully engage so my kids don't get hurt and limited it 35 mph ... They love it

@timsolomon8352 Жыл бұрын

Did you have to drill the carb like he did? I feel like it was something else and that didn't need to be done?

@GriddleMeThis Жыл бұрын

@@timsolomon8352 I didn’t do anything to the 212 engine but bypass the governor.

@davidpayne4084 3 жыл бұрын

Carroll Shelby once said you can never have enough horsepower but traction that's a whole another story

@mxfool1508 3 жыл бұрын

You did an awesome job with the quad the big kids and the little kids are going to have some fun

@hectorjauregui3404 3 жыл бұрын

Well done Weld the muffler on the end on the pipe is going work better.sound better

@juanbotello7940 2 жыл бұрын

Wish you were in Wisconsin I would pay you to get this done lol

@boatdoctors 3 жыл бұрын

Nice job. I have several 212 projects as well very fun

@teammouse 3 жыл бұрын

You deserve more views!

@timsolomon8352 Жыл бұрын

Is it possible, since it's gravity fed? No fuel pump I imagine, that drilling the jet wasn't necessary? The fuel line curling like it was would cause issues... also removing the throttle screw probably played a big part.

@DIYD_Do_It_Yourself_Dad Жыл бұрын

Drilling the jet isn’t necessary but it does give it more power.

@Ghost88890REAL 2 жыл бұрын

Hey! I am starting to do something similar to yours, so how did you do your build? I was planning to make mine a chain driven sprocket gearing, but what's the difference if I put clutch/torque converter/etc? I'm new to this.

@DIYD_Do_It_Yourself_Dad 2 жыл бұрын

I don’t think a clutch is strong enough that’s why I went with the torque converter. It worked very well. I think the clutches are rated by tire size and the tires on my atv were way bigger than what a clutch was rated for.

@MrRyancangri Жыл бұрын

Awesome wow!!!!!!

@austinsheaffer4771 Жыл бұрын

Don't think you did, but did you bypass the gov? If you do, you can prob get an extra 10mph+

@austinsheaffer4771 Жыл бұрын

Nvm you just said it in your video 😂

@williambrown6916 2 жыл бұрын

What do you get the rear sprocket from

@rmoran9999 2 жыл бұрын

I did one for my son it's a Kawasaki 110 Mojave I put a new carburetor mikuni

@therealilxaiden 2 жыл бұрын

Put a 17 tooth clutch on it.

@kraftcraft2934 6 ай бұрын

Pretty cool

@williambrown6916 2 жыл бұрын

And also where you get the torque converter from

@DIYD_Do_It_Yourself_Dad 2 жыл бұрын

Got everything from ebay

@deanmayoral8688 Жыл бұрын

Is that drillbit. What size is it. The smallest I can find is 1/16

@DIYD_Do_It_Yourself_Dad Жыл бұрын

It’s a 60 gauge. You have to buy the whole set at harbor freight to get that bit.

@DIYD_Do_It_Yourself_Dad Жыл бұрын

Warrior brand part #63764

@jessicac168 6 ай бұрын

What size chain and rear sprocket ? I’m in the middle of doing this ? Got the torque converter the chain that was on my atv was a 428? If you have a link for the chain and sprocket that would be great. And I’m guessing 5ft right? Thanks

@pedromaguellal6662 3 жыл бұрын

So how do you do a govern delete for the speed

@diy5starautoinfo580 Жыл бұрын

What type of welder did you use?

@DIYD_Do_It_Yourself_Dad Жыл бұрын

The cheapest one I could buy at harbor freight 🤣

@diy5starautoinfo580 Жыл бұрын

@@DIYD_Do_It_Yourself_Dad like is it a flux,mig or tig 😂😂😂

@diy5starautoinfo580 Жыл бұрын

@@DIYD_Do_It_Yourself_Dad I have the four-wheeler frame I have the engine I just need to know what type of welder to use to get it done

@DIYD_Do_It_Yourself_Dad Жыл бұрын

@@diy5starautoinfo580 it’s a flux core

@paulgardner587 4 ай бұрын

I have wanted to do this found one for $100 on market place. I was worried about torque , stop to pulling power, hill climbing? It’s pulling a grown man I imagine a 60-75 lb kid it would be ok

@DIYD_Do_It_Yourself_Dad 4 ай бұрын

It depends on your gearing