Use this link to get a 1 month free trial of Skillshare! skl.sh/MKR343

"Maybe I'll just get lucky and not get parity" Famous Final Words.

‘I’m not just Ting I’m Tingman.’ -Tingman 2021

DANG you only had to get no parity on the void cube once and you would've saved $50... you were in the unluckiest 25% of outcomes 😭 😭😭😭

I see Tnl's hand receiving the moneyy 😅

Tingman: this puzzle is the same as a 3x3' Also Tingman: *takes 10 minutes to solve*

Get you and a bunch of other cubers together, do this but every puzzles they can't solve is $50 to charity, make it a fund raiser.

​When I switched on captions, "mastermorphix" came as "monster morphix". I mean it's not wrong.

Cubehead has some pretty great ideas. I was on the edge of my seat the entire video. PS: Who needs friends, when you have enemies like that.

Friend: what’s the definition of wholesome *shows them this channel*

If you don't know the void cube parity alg, simply make a Uw move and start again from the second layer on. The reason for void cube parity is that your center holes are not in the correct position and you need to turn 4 of them by 90 degrees. This means M (or M') is okay, too. Then you don't have to fix F2L but only 2 cross edges. Great situation for Roux solvers though.

This video and your other non wca videos really made me want to get more non wca puzzles! Nice video tingman!

You need to invest in some 4-sided Dice. 3d4 is fairer and lower variance than 2d6 (even 3d4-1 is better). Less likely to get those really big or really small numbers.

Tingman: *complains for getting 3 minutes* Dice: "I better give him a big number so he won't punish me." Also dice: *rolls 11 minutes*

"So you want to be a software engineer at google?"

Congratz on your success dude!! 100k subs is amazing!

4:44 I can’t stop laughing, like, he’s got a good point and question 🤣🤣

CubeHead’s Roast was Great!

Reading the title then seeing Cubehead, I thought CubeHead was your enemy lol

its funny because with the void cueb the begginers method would never get parrody LMAO

Tingman has so much time he can explain while solving

I got the windmill cube a while a ago and it took me about a month to realize it’s just a 3x3 but you have to twist the centers

I can’t wait for another amazing video by the ting man! Also are you going to re open Sunday in Sydney?

3:11 the way tingman says "this is not funny" makes me think its funny

For the void cube. If you get parity you can do a M’ move and assume that the centers are correct and solve it again without messing with the centers. I remember jperm saying that in his void cube vid.

Hey Tingman, if you thought that the axis cube was pretty hard you should try some of my original 3D printed puzzles.

Milan be like: chess with pablo 😂🤣😂🤣😂

This was really stressful and very entertaining. Keep up the good work tingman! By the way, im a new sub and i just subbed.

Let me just ask... Is there a chance this enemy may be called TNLCubing or maybe CubeHead?

"how did I make it worse?" .... .that feeling,.... I knows it. Lol

pablo and cubehead playing chess who will win

"Are you Tingman or are you just... Ting?" roast of the century

This guy could solve a normal rubix cube 37 seconds while air diving but not normally 😁

If I tried this I would owe TNL $200.

I think the video would have been a dream-style* video, while being lengthy, it truly would feel like a Documentary ( * an Editing style of a trending youtube )

Hello! Welcome to my tutorial on how to make a void cube! Here are the materials needed: - A speedcube Alright. So now we have all of our materials needed, let's do this. Step 1: Take off all center caps And there we go! A void cube!

1:00 Ting man: “$200 spent on tank cubing!!” Ting man:” that’s bad…”

Ting man: saying I love learning new things Also tingman: spending thousands of dollars on one hobby

this was so exciting to watch!!

Love your vids tingman your awesome keep up the good content

Look at the bright side Tingman is getting $100 worth of cubes tnl can unbox

Everytime you're unsure about the case, just use the beginner algs. They're much more versatile. While oll and pll is really specific to cases.

Amazing vid. I think you are learning Cubehead's editing style. :P

Your vids are so entertaining. You are a very talented Cuber 👍😊

for void cube parity, I take out all the F2L pairs, do an E move and reinsert them and try to finish it off, repeat if necessary

Happy birthday TINGMAN.

"So I just gotta do a sexy move" Non cubers: wait what? Cubing includes por-

For the windmillcube: If you have a uperm, you can make two of the in the inter direction, that the centers stay right

"void cube" *Somehow removed the core and center pieces on the 3x3*

The 3rd puzzle has a flipping centers (each center has a correct position and 3 wrong ones). I have a twisted cube, and i 2look pll it. After i transform it in U-perm, i do it not 1, but 4 times. Or just 1+3 U-perms.

11:35 look at that adorable smiling face ☺️

btw tingman, the beginner's method last layer is the most efficient way to solve the windmill cube

TNL: Do this kind of video more, I will be rich soon 🤑 Tingman: OH NOOOOO NEVER 😵🥴

Imagine you were about to succeed but then the timer runs out just after you did 10 degrees of the last move

Void cube can be called “post-setup” cube 😂

When you said the cross was done, I was like, HUH?!?!?!?!?!?!? You are a genius to figure that out, I would never be able to!!!

Me who likes chess & Rubik’s cubes: Yaaaaaaaaaaaaaaaaaaaaaaa! (Some random person: This is the reason you have no friends).

You absolutely need your own rendition of the original Batman cartoon theme song, but it would be the Tingman version

the moment you realise tingman is having amnesia because you knew the pll to solve the void but he didn't even though you didn't even know full pll

Alternate tile, cube head tortures Tingman and makes him broke

Lol Pablo destroying cubehead at chest

Windmilll....love it.....how about the mirror cube ?? Anyway that's great

0:37 He's not only CubeHead ,but also SavageHead

cubehead and tingman are my favorite KZfaqr cubers

TNL cubing right now:🥳🥳🥳🥳🥳🥳 Tingman right now:😃🔫

I've tried solving a 3x3 with no centers (simulated void cube)... I got center parity EVERY time. Congratulations for getting that close! I couldn't make heads or tails of it

Tnl when watching this video: Pls fail pls fail plsssssss

tingman : $200 thats alot. Also Tingman : my entire puzzle worth $20,000

You should give him $50 worth of bananas 😂😂

Nooo that timer sounds like my alarm in the morning... ahhhhhh painnnn

I think cubehead will be receiving the money because firstly Tingman did mention that the vide had to do something with Cubehead. And secondly, in his video Cubehead said that Tingman was a little bit slower than him and therefore he couldn't challenge him. Maybe it's that maybe not

When you was in the last layer at the void cube for the parity use this algorithm: M' U M2 U M2 U M' U2 M2 U'

Hey ting man make a video where you fight J Perm!

FYI if you solved the void cube with roux and you got parity just do an M' and you will still be on the last step instead of restarting if you used cfop

For the first one, couldn’t you have used the beginners method for the 3x3, it makes sense to me but I’ve actually tried that type of cube.

Me when i have no good timer

very nice man tingman

When you know how to solve void cube parity and all you can do is watch 😭😭😭

Money lost= $150 TNL: YIPEE!!!

He in the click bait: I give 50 dollars to my Bhal bhal bhal Me :it’s a hundred dollar note

Your videos are great

speed cube shop is the best haha

I read the title and *KNEW* it was tnl cubing lol

Imagine getting an impossible solve in this situation!

Had tingman just done an M move and then solved normally, he would be able to solve void cube.

i dont have a void cube but i have a 3x3 and i just take out the middle peices so its like a void cube and mixed it up and solve it in less than 1 min

4:39 Famous Last Words

tips: when you get a parity on void cube, just change a center to be white (if you are white color based)

How to solve parity? Just to M' and solve those 2 edges with even number of slices lol

I know how it feels like to not solve a void cube Story: I have a 3x3 that can pull of the center piece I peel it and it looked like a void cube I found on daily puzzles Me: coooooooooooool I tried to solve it **after solving it** Me: AHHHHHHHHHHHHHHHHH

The first cube you have to imagine a 3x3 with black centers

The void cube is just like a 3x3 and a 4x4 with out the centers and the is parity!

For the first cube do the normal cfop and not advance cfop I bet it will be easier XD

For the last part of the void cube I would put the one that is correct to my right and behind and do R U R’ U R U2 and then the corner that is right I put on my top right hand corner and do U R U’ L’ U R’ U’ L then do again until all corners are in the right place then I would do R’ D’ R D and continue until the yellow piece is flipped correctly and in place then do a U’ then do again and again. This is the beginner method. Not the most effective but it still works.

Hello tingman I dare you to draw a impossible case of Rubrik’s cube on your silver play button It would be great if you make a video about it

a win is a win

I've try your challenge (with different scramble and potential different model of the cubes though) , here's my results : Void cube : 53 seconds left on the timer (because no parity, otherwise, i've would'nt abble to do it to, i've forgot the parity algorithm) Axis cube : 4:19 left Windmill cube : 2:28 left Mastermorphix : 3:52 left The mastermorphix is the only one i've used recently, have'nt touch the others for years. I think for this kind of puzzles, the fact that i'm not a speed cuber (i only want to know how to do all of my cubes) have help me here. I don't use cfop (i only know how to do basics F2L, i don't know OLL and PLL), i've used the begininer method, because of that, i've spend less time being confused where my pieces were on the cube, because i've just placed them one by one. I really think, using the beginer method is the best for the shape mods when you're not used to them. It was a fun challenge to try ! :) Now... i really should start to learn the Square-1...

3:03 I know sometimes when i just get parity or stuck i just redo the whole thing / re-scramble XD

It is really impressive that you solved an axis cube for the first time in less than 11 minutes. It is way harder than it looks.

Tingman is the reason I started cubing (I still can't solve a cube)