No video
I got tired of getting STUCK! - Installing Hidden Winch on my Ford Bronco
Рет қаралды 34,409
Күн бұрынWell, the @RoughCountryTV Hidden winch mount is finally available for the Ford Bronco Modular Bumper! Really happy because I I got tired of getting STUCK! Well, not getting stuck anymore. Not for long anyways.... No more digging for me when I'm getting stuck haha.
Actually, I'm probably going to get more STUCK now! But it's all fun.
Affiliate links to support my channel!
Rough Country All Bronco Accessories: amzn.to/3OrntKn
Bartact Grab Handles! use code NSBRONCO to save 5%!
www.bartact.co...
Toilet Bucket: amzn.to/3tyzwec
Black Shackles: amzn.to/3v4GCYP
Orange Shackles: amzn.to/33vz3Pt
(close enough)
Tire Deflator: amzn.to/3Htf7v6
For the Best Off-Road / Overlanding Gloves, Look no further than GIVE'R
alnk.to/3y8oXPO
I work hard to make these Videos, if you enjoy them please show your support by Subscribing here www.youtube.co...
@justaguy6100 2 жыл бұрын
You nailed exactly why I watch these videos; to avoid the mistakes I *definitely* would make if I didn't. I really like it when a DIY'er like yourself actually SHOWS us what those mistakes can be, too. No ego there, just info. Cool!
@NorthShoreOverland 2 жыл бұрын
Glad it was helpful! Make sure to subscribe so you can watch me almost kill myself in the future! haha
@justaguy6100 2 жыл бұрын
@@NorthShoreOverland Definitely did. And I hope you survive, maybe just a little dismemberment? 😬😬
@joeya1970 2 ай бұрын
this made me decide this will be my best option. I wasn’t wanting to move my ACC nor front camera
@NorthShoreOverland 2 ай бұрын
I still think it's the best mount out there for the Bronco. And I use and abuse my winch haha.
@gjmacinnes 2 жыл бұрын
I love the fellow Canadian "get er done even in winter" attitude. My experience was pretty similar. I thanked my son for assisting me with removing the bumper and showed him the challenges you had doing it solo. I also unbolted the hose lines clamps and tucked the hoses back during installation after a near miss like you had. I was nervous using a grinder because of sparks going into engine bay and just used sawzall but you seem to have made it work. Happy my bolt tip helped and good to hear the new kit will include the 8mmx30mm bolt.
@NorthShoreOverland 2 жыл бұрын
Is it still winter? Didn't notice.... Yes, thank you very much for the heads up. Time is something I don't have much of, so it was nice to have those 2 bolts handy once I needed them. So Basically you got the same thing as me except the two Intercooler plates. Yea, that was a pretty close call!
@goinwheelin Жыл бұрын
After watching this I’m gonna go with the hidden mount. I like the look of the high mount but don’t want to move the front camera or sensors. Great video showing the average person with hand tools can accomplish this install without too much fuss. Thanks!
@NorthShoreOverland Жыл бұрын
Glad I could help! You'll love it!
@EvilleTruck 2 жыл бұрын
Nice, love how well that tucks under there and works with existing bumper. Great solution for anyone that doesn't want to change out their entire bumper, or pay Fords ridiculous price for their winch. Just need a oil cooler relocation kit to come out for the 2.7s
@NorthShoreOverland 2 жыл бұрын
Thanks Bill! Yea, they are actually testing their 2.7 version as we speak. Should come out in a few production runs.
@NorthShoreOverland 2 жыл бұрын
***UPDATE*** Hidden winch mount is now available for all Bronco Models!: glnk.io/73wl1/northshorebronco
@Ecobeastsoffroad 2 жыл бұрын
I loved that mount but thought it wasn’t compatible with the modular HD bumper!?
@NorthShoreOverland 2 жыл бұрын
@@Ecobeastsoffroad I'm a RC ambassador so I got an early release of version 2. It will be out soon for everyone!
@PG-lf3rr Жыл бұрын
Probably the most real DIY video I've ever seen. But you did it man! Seriously, I've had a 72 Nova tranny sitting on my uncles knee just to get to a brilliantly placed freeze plug between the flywheel and the engine block. Lotta blood sweat and tears to replace $2 brass plug. This was awesome!
@bo-vd4od 5 ай бұрын
Use a cutting wheel on a grinder for goodness sake!
@ilovedrpepper1195 2 жыл бұрын
So stoked to see the RC hidden winch for the modular!! That is what I hope to do.
@NorthShoreOverland 2 жыл бұрын
I'm really happy with it!
@rangerwolfhound Ай бұрын
I don't know how much people use a winch, but they are easier to get to when buried in mud if NOT ON the BOTTOM OF a TRUCK -
@Lethal_Venom 2 жыл бұрын
That looked like a really fun install that I wont be doing lol. I can see why you want it with as much as it must be tiring getting stuck. Can't wait to see it in action now.
@NorthShoreOverland 2 жыл бұрын
Haha, it was fun!
@Jpulido91 2 жыл бұрын
Damn that looks nice!!! I can assume some “F” bombs were said slipping on that ice!!! I might have to get this kit when I get my black diamond! Great vids! Keep ‘em coming!!!!
@NorthShoreOverland 2 жыл бұрын
Oh there was! The power of editing hahaha. I love it! Can't wait to actually go out and use it!
@Overlanding4Fun 2 жыл бұрын
I respect a man who has his watch set for 24 hour time. I which there was a hidden wench option for the 2.7.
@NorthShoreOverland 2 жыл бұрын
Haha thanks. They are currently working on a kit for the 2.7. I'll be posting when it releases.
@lucasgitz8614 2 жыл бұрын
Oh great! I have a 2.3L Badlands and been waiting for RC to release a version of the hidden winch that works with the modular bumper. Two quick questions for you. Do have a date of when the V2 winch will be released? Can you show the location and how hard it is to get to the free spool knob? Thanks!!! Great job and great video!
@NorthShoreOverland 2 жыл бұрын
Thank you! #1- No set date, it will be released on the next production run once current stock is sold. From what I know, that shouldn't be too long. V2 skid plate is already in the kits but the bolts and two intercooler plates are not there. #2- I was so busy I never even tried. So I checked this morning. You can't get to it from underneath, it's well protected. But, if you turn off your Bronco first (moving belts and fans are dangerous) You can put one foot on the bumper, hop up and reach down through the hood and get to the free spool knob. Not ideal, but it's a trade off with having it hidden. I'm going to pick up one of those reacher/grabber claw thingy's and it should work like a charm. I might even zap strap an extension to it...... more to come.
@kendryliranza8273 2 жыл бұрын
Excellent video. Thank you so much. Buying this set up as soon as my Bronco arrives.
@NorthShoreOverland 2 жыл бұрын
Glad it was helpful! I love this set up!
@user-vw7qe1cf9x 9 ай бұрын
Loved this vid. Very helpful in showing me that it is beyond my skill set. lol. you did great at explaining. And I had several good laughs when you were under the bronco and things were falling on you and you had a rough time getting up. reminded me of how I look and feel these days. Im now 60 and many things simply hurt too much. lol
@NorthShoreOverland 9 ай бұрын
Glad it helped! I like to show "real" install videos haha. Not the perfect set up hoist with all the perfect tools that no one has at home.
@willay747 2 жыл бұрын
Yep got the same hidden winch. Works great!
@NorthShoreOverland 2 жыл бұрын
Awesome! I love it.
@BuckingBronco 2 жыл бұрын
Awesome job! I would've been glad to help you out during the installation. It looked exhausting, but at least I could have learned how it's done. Thanks for the links. This may find it's way into my Bronco (when it finally gets here). ;)
@NorthShoreOverland 2 жыл бұрын
Thanks! I'm just out of shape haha. Was a fun install.
@r_itchytrigger Жыл бұрын
I just stumbled across your channel. I knew when you propped the bumper up with a port-a-poti we were alot alike. Keep up the great videos and thanks for all the good info. Cheers
@NorthShoreOverland Жыл бұрын
What else would you use to hold up a bumper? Haha, thanks for the support!
@vincemorales5974 2 жыл бұрын
Thanks for keeping it real 👍🏼
@NorthShoreOverland 2 жыл бұрын
Always! Thank you for watching!
@quitethemike 2 жыл бұрын
Wow awesome there are starting to appear some HD Bumper winch options that don't mess with the adaptive cruise control, and I love hidden winch installs but I think I'll keep waiting till someone comes up with a no-cut version.
@NorthShoreOverland 2 жыл бұрын
Unfortunatly there's no room for a No Cut version. Not for a hidden winch anyway. Those frame extensions are just in the way.
@TheBigRally21 Жыл бұрын
Great video! Glad you shared. I’ll be a KZfaq mechanic soon thanks to videos like this.
@NorthShoreOverland Жыл бұрын
Glad you enjoyed! Haha, don't look at me as the standard for being a mechanic haha.
@jabroni6199 Жыл бұрын
Great video, a few things I noticed: 1) This would be a lot easier if you had an extra pair of hands helping 2) Impact wrench! 3) The mounting points seem inadequate for the stresses this thing could potentially see... Just one bolt on each side that's keeping it from either dropping or being ripped out? Those washers also appear pretty anemic for the gaps they need to cover
@AdamHillikerLikesRobots Жыл бұрын
I had that initial concern too but it looks like it's one bolt on the back, and then two bolts up into the rails on each side.
@AdamHillikerLikesRobots Жыл бұрын
Hahahaha toilet bucket link in the description you rule aaaaa
@NorthShoreOverland Жыл бұрын
It's the little things that bring me joy.
@HubCityOverlanding 2 жыл бұрын
Never an easy task with no extra hands. I know that feeling! 😂 Gotta do some cutting to get where ya want, eh! Now time for the Tacoma to get the full skid plates and high clearance front bumper with winch. See you on the trails! 🤘
@NorthShoreOverland 2 жыл бұрын
You got that right! Oh yes, I'll be hitting you up soon to go camping in the Moncton Area!
@HubCityOverlanding 2 жыл бұрын
@@NorthShoreOverland Awesome man! Snowmobile "law season" will be ending very shortly and we'll be able to camp at our favourite spots soon!!
@Carl-vx9ws 2 ай бұрын
Too much permanent modification for me ✌🏼
@JackFrost-xy7yl Жыл бұрын
Your video was great. I watched a different video, he did not mention installing the ground wire. I missed it, so you video would have saved me time. I ended up watching your video to finish the install. FYI, test fit the box the winch sits in. Mine did not fit without making the holes bigger. The brackets were just a bit off.
@NorthShoreOverland Жыл бұрын
Right on. See, got to watch my install videos first! haha. Well I'm glad you were able to make it work in the end. Eventually I'll be installing another one on my wife's bronco.
@JackFrost-xy7yl Жыл бұрын
@@NorthShoreOverland His video showed up first in the list, but will definitely watch yours first next time.
@NorthShoreOverland Жыл бұрын
@@JackFrost-xy7yl oh I was just kidding around haha. But thanks!
@JackFrost-xy7yl Жыл бұрын
@@NorthShoreOverland I have seen most of your videos, very funny and detailed.
@NorthShoreOverland Жыл бұрын
@@JackFrost-xy7yl Excellent! Thank you! Lots more to come!
@GONAVYCHIEF 11 ай бұрын
Mine has a 2.7, when I dropped the skid plate and noticed a cooler was located where the winch would go. I then said NOPE, I'm not going any further. I ordered a Turn winch mount and installed it in 30 minutes. I did not have to cut anything or relocate the cooler, pump and brake line.
@NorthShoreOverland 11 ай бұрын
Yea, it's a pain to install on a 2.7. I just love the look of it
@cbvelacyn1217 2 жыл бұрын
ive been waiting ofr this, too bad the solotion comes before the bronco for me lol
@NorthShoreOverland 2 жыл бұрын
Ah... well hopefully your Bronco gets built soon!
@jackb804 Жыл бұрын
Gonna hire somebody to do this!
@NorthShoreOverland Жыл бұрын
Hey, if you can pay for a shot to do it, all the the power to ya. I just like tinkering once and awhile.
@JEByrd 2 жыл бұрын
This is so me.... doing it all by myself.
@NorthShoreOverland 2 жыл бұрын
I'm too impatient to wait for help haha
@sugershakify 11 ай бұрын
18:29 ... ok, I should have taken the bumper off. lol
@NorthShoreOverland 11 ай бұрын
Haha, learn from my mistakes 😂
@Jasonswenk 2 жыл бұрын
That is cool and was fun to watch :) When do they say it will be released?
@NorthShoreOverland 2 жыл бұрын
Thanks! As soon as they sell the stock of the current run. Shouldn't take too long.
@dawnfirephotography 2 жыл бұрын
Nice setup! Do you think you lost any height on your approach angle by installing the winch there?
@NorthShoreOverland 2 жыл бұрын
I think I actually gained some space. Go look at my community posts, I put a side by side photo next to another badlands with the bashplate.
@stevenbarley6908 2 жыл бұрын
Thanks for sharing this! I’ve got BD on order and just changed the bumper from the capable bumper to the modular bumper, but was debating if I made the right choice losing the stock fog lights. Going to stick with modular bumper I think!
@NorthShoreOverland 2 жыл бұрын
The modular bumper looks amazing and is quite solid. I may or may not have hit a few trees with it.... and it's fine.
@oobeedoobenubi 2 жыл бұрын
@@NorthShoreOverland All I have managed to hit with mine is the speaker box at Dairy Queen drive thru.
@NorthShoreOverland 2 жыл бұрын
@@oobeedoobenubi Nice! Who won? I'm betting the MOD bumper. haha
@oobeedoobenubi 2 жыл бұрын
@@NorthShoreOverland i now have my first scratch on my bronco. It left a little scuff on the endcap. The speaker box was relatively unharmed.
@nasgarth6322 Жыл бұрын
Hey out of curiosity sir are you in Minnesota? I read North Shore and immediately thought MN haha :)
@NorthShoreOverland Жыл бұрын
North Shore of New Brunswick Canada. It's funny, everyone has a North Shore I've come to find out haha.
@ChavaCartas Жыл бұрын
nice video! hard to Install the winch, justo for profesionales.
@NorthShoreOverland Жыл бұрын
Thanks! 👍But I'm far from a "professional" haha
@D3thM3tal 2 жыл бұрын
Thanks for the link to the toilet bucket ;) How much ground clearance/approach angle do you lose with that setup?
@NorthShoreOverland 2 жыл бұрын
Well, with the bucket in place, it kind of ruins the approach angle..... oh.... um.... with the winch you mean? I really regret not checking before, but I think it's the same. If not, really close to it. My buddy is coming by tomorrow with his badlands and I will compare. I'll Probably post it as a shorts video.
@D3thM3tal 2 жыл бұрын
@@NorthShoreOverland Thanks, both of my Broncos have 2.7's anyway, but I'm curious how the approach angle changes with that setup.
@NorthShoreOverland 2 жыл бұрын
@@D3thM3tal they are working on a kit for the 2.7 right now .
@escaped2004 Жыл бұрын
hahahahahahaha.....man, you are so authentic, the
@NorthShoreOverland Жыл бұрын
Haha thanks. I hate videos that say "you can do this at home!' then proceed to use a 30k hoist and roll out half the Snap on truck.
@theaxeman8492 2 жыл бұрын
Awesome job Steph. Can’t wait to get mine. I think I’m gonna try using a portable band saw for those frame extensions. Looks like it would fit from the video - but I’ll see when I get it. Do you know wether a Badlands Apex 12K winch from Harbor Freight will fit? I doubt you’d know personally - but may your contact at RC could tell you? Keep up the good work! If ever I head to the Maritimes for a road trip I’ll hit you up!
@NorthShoreOverland 2 жыл бұрын
For sure hit me up! Are you in Main? I googled that winch and it doesn't look all that big. I'd say it would fit. RC has only tested their winches with the mount so.... Just make sure it's synthetic rope because of the fairlead.
@theaxeman8492 2 жыл бұрын
@@NorthShoreOverland nope - I’m in Montreal! A fellow Canuck 😉. We still haven’t separated. 😂😂😂🤦🏼♂️ And yes - it’ll be synthetic.
@jameswalter6484 2 жыл бұрын
😆 fun video
@jameswalter6484 2 жыл бұрын
still waiting on the 2.7 version
@NorthShoreOverland 2 жыл бұрын
Thanks, I try to make them as entertaining as possible! The 2.7 version is supposedly coming very soon....
@adamwebber9547 2 жыл бұрын
Loved the video - making it happen! On a different note - also want to put lights in the ends of the Mod Bumper. What kind do you have and what's the $$? Thanks again - keep droppiing your vids!
@NorthShoreOverland 2 жыл бұрын
Thanks Adam! I put some 8" Rough Country lightbars in there. You need to modify the brackets to make it work, but I love the look and they are nice and bright for off road. Here's my install video, and the link to the lights are in the description. kzfaq.info/get/bejne/mdGooZSA0bLSiJs.html
@blackrebelbeard 2 жыл бұрын
im been waiting for this. come on RC
@NorthShoreOverland 2 жыл бұрын
It's out for the 2.3 engine!
@blackrebelbeard 2 жыл бұрын
@@NorthShoreOverland 2.7 here :/
@MJuematsu 2 жыл бұрын
Do you know if they have will have something like this for the 2.7L? I really want a winch but want to keep it hidden like how yours is. Looks great btw!
@NorthShoreOverland 2 жыл бұрын
Thank you! and yes, they are testing their 2.7 version right now. Should be out in a few production runs.
@MJuematsu 2 жыл бұрын
@@NorthShoreOverland oh wow thats awesome!! Definitely keeping my eyes peeled for that!
@DaleKirkley 2 жыл бұрын
@@NorthShoreOverland Sweet, definite purchase when they do!
@Drrrre 2 жыл бұрын
I might’ve missed it, because I fast-forwarded past a few parts (sorry), but is approach angle or clearance affected by the winch mount? Also, is the mount itself acting as underbody armor?
@NorthShoreOverland 2 жыл бұрын
It's so close that it's hard to tell if you gain or lose. I feel like you gain some clearance. Go check my community posts, I posted a side by side photo with another Badlands. And yes, it does act as some protection under. Coverage is the same.
@mikesveganlife4359 2 жыл бұрын
You definately need your kid to get older fast so you have a built in helper. You should show free wheeling the winch in the future so that people can see how you deal with it's location and the freewheeling knob. Depending on your height I'm thinking a tool might need to get fabricobled together to make it easy. Maybe something to mount under the hood. That's the winch setup I plan to get, though I'm getting the base and will likely get an aftermarket bumper, so I'll have to do some fabrication for the bash plate I would use with the winch.
@NorthShoreOverland 2 жыл бұрын
Haha yea, tried to get the dog to help but she just licks my face haha. Yea, you know what, I've been so busy since I installed it that I haven't tried to reach the handle.... Good point. I'll need a grabber of some sorts to reach it ...
@mikeduron5315 2 жыл бұрын
This is such an amateur question. But curiosity with it being mounted low and if you were to go thru deep waters will it affect winch performance?? When you get out from water that is ... I like the hidden Winch I want it for my blk diamond
@NorthShoreOverland 2 жыл бұрын
I don't know...... but I'm going to try it!!!!!!!!!!!!!!!!!!
@evenflo75 Жыл бұрын
I just noticed you have both a ranger and bronco. are you in ranger 5g? I will be trying a Bronco bumper on a ranger myself
@NorthShoreOverland Жыл бұрын
I do have an account on 5g.... But we sold the Ranger for a second Bronco 😃
@evenflo75 Жыл бұрын
@@NorthShoreOverland I had mixed feelings wether hitting thumbs up or down on that comment 😆
@alpinegarage8548 2 жыл бұрын
Nice real life install. Just get under your truck and get it done. Nice job!
@NorthShoreOverland 2 жыл бұрын
You got that right! Gota do what you can with what you got!
@Bob9999 6 ай бұрын
Great video. Does your Bronco have the 2.7L V6 ?
@NorthShoreOverland 6 ай бұрын
Thanks! Mine's the 2.3
@rockoq173 2 жыл бұрын
Definitely want this for my modular bumper.
@NorthShoreOverland 2 жыл бұрын
Oh it's worth it!
@rockoq173 2 жыл бұрын
@@NorthShoreOverland I have been hearing that manual owners are noticing a grinding noise during cold starts. Have you noticed this at all as well? Sorry I know this doesn’t have anything to do with the winch.
@NorthShoreOverland 2 жыл бұрын
@@rockoq173 hmmm, I haven't noticed anything. First I hear of it. I'll start listening for it.
@rockoq173 2 жыл бұрын
@@NorthShoreOverland awesome that’s good to hear. Saw a tread on 6G and was a little worried. Figured I’d ask someone who actually has one and is honest.
@mattmcdevitt3758 5 ай бұрын
Anything you have to install that requires removing part of the original frame will never happen on mine Eventually they will come up with one that requires no removal of any original part of the frame.
@cynicsupreme 2 жыл бұрын
What fog lights are those in the bumper? How do you like them?
@NorthShoreOverland 2 жыл бұрын
8" Rough Country Lightbars. Just used for offroad linghts but I love them. Here's my install video. kzfaq.info/get/bejne/mdGooZSA0bLSiJs.html
@breaddrinker 2 жыл бұрын
Why are the only ones available for the 2.3? Is there some larger issue with the 2.7, or just the order it went in?
@TJA-AZ 2 жыл бұрын
Hey maybe you answered this already...but I have a Base Sasquatch with 2.3L on order. I want to add this hidden winch. Which bumper should I order to make this an easy install, the standard bumper or the Modular bumper? Seems like the skid plate would get replaced with the RC hidden winch right?
@NorthShoreOverland 2 жыл бұрын
It'll fit with either one so... up to you. But Modular bumper could hold up your order.
@recon2504pir 2 жыл бұрын
Is this available for the modular bumper yet?
@NorthShoreOverland 2 жыл бұрын
It is! For the 2.3 engine only. The website description is wrong but it is the new kit.
@recon2504pir 2 жыл бұрын
@@NorthShoreOverland I just saw in the instructions that you have to cut the frame? Wonder if this will void the vehicle warranty?
@NorthShoreOverland 2 жыл бұрын
@@recon2504pir You'd have to ask your dealer.... But usually warranty will only be Void if it's the part or action that caused the failure. Let's say your frame rusted out where you cut, it would be VOID.
@northmantru6236 2 жыл бұрын
Compatible with adaptive cruise control?
@NorthShoreOverland 2 жыл бұрын
Yep! because it goes below everything, doesn't affect the sensors.
@Carl-vx9ws 2 жыл бұрын
I like the look but I am curious about longevity of the winch in this location and how often you clean your winch line. ✌🏼👍🏼
@NorthShoreOverland 2 жыл бұрын
I am also curious. I will post a long term review and if I have any issues. We shall see.
@Carl-vx9ws 2 жыл бұрын
@@NorthShoreOverland awesome 👏🏼 looks nice 👍🏼
@kaijorgensen6940 2 жыл бұрын
Does that winch mount mess with the adaptive cruise control at all? The sensor looks like it’s at stock placement there at the end. I’ve been trying to find a workable solution to keep the features mine has
@NorthShoreOverland 2 жыл бұрын
Doesnt' interefere as it goes underneath everything.
@greenhawk3796 2 жыл бұрын
now that it's been a few months, how do you feel about the winch/mount from rough country. lots of people i talk to say not to buy rough country.
@NorthShoreOverland 2 жыл бұрын
It's been great! No issues yet. Rough Country is great Value. Even if it breaks, I can buy another one and it's still less money than a warn...
@Candisias Жыл бұрын
Do you have a 2.7 engine or the 2.3? I saw another video where they said the 2.7 is harder to do this.
@NorthShoreOverland Жыл бұрын
I have the 2.3. Yes, with the 2.7 you need to relocate the cooler. Harder, but doable.
@xXSidlerXx 2 жыл бұрын
Do you happen to know if chopping those frame extension off impacts the factory warranty or not? Thanks in advance!!
@NorthShoreOverland 2 жыл бұрын
It would only affect warranty if something broke because of it. Like if it rusted out from where you cut, or you cut way to deep and the frame broke. Or if your dealer is a d1ck and tries to screw you.
@shaneharden6579 2 жыл бұрын
Great video! How much clearance do you think you lost?
@NorthShoreOverland 2 жыл бұрын
Go look at my community posts. I posted a picture next to a Badlands with skid plate. I actually think I gained some clearance.
@nwmissouribroncos8035 2 жыл бұрын
Nice video! Thank you it will be helpful. My big question is can you reach the clutch on the winch or are you only able to run the line out under power?
@NorthShoreOverland 2 жыл бұрын
I was so busy I never even tried. So I checked this morning. You can't get to it from underneath, it's well protected. But, if you turn off your Bronco first (moving belts and fans are dangerous) You can put one foot on the bumper, hop up and reach down through the hood and get to the free spool knob. Not ideal, but it's a trade off with having it hidden. I'm going to pick up one of those reacher/grabber claw thingy's and it should work like a charm. I might even zap strap an extension to it...... more to come.
@nwmissouribroncos8035 2 жыл бұрын
I was thinking it would be a booger. I wondered if you could make a “T” handle with some kind of attachment that would allow a person to reach the clutch without too much trouble. It’s probably the only thing I dislike about that setup.
@NorthShoreOverland 2 жыл бұрын
@@nwmissouribroncos8035 oh you definitely can and I definitely will. It's easy access all the way down. A broom stick, a fee zap straps and your good to go.
@nwmissouribroncos8035 2 жыл бұрын
I was hoping that would be the case. My bronco is on some sort of hold in the rail yard in Kansas City. 20 miles from the dealer. It’s enough to drive me nuts
@jeremyfreed6202 2 жыл бұрын
Why didn’t you get one made for the bronco so you didn’t have to saw parts off.
@NorthShoreOverland 2 жыл бұрын
Meh, I'm not afraid of a little bit of modifications. Love this set up.
@127pcj Жыл бұрын
The frame extensions appear to be protection for the intercooler. Has anyone else come up with a purpose for these?
@NorthShoreOverland Жыл бұрын
I don't believe so. It's the same frame as the Ranger, so maybe it has a purpose there.
@williamheim7480 2 жыл бұрын
Will this interfere with the intercooler air pathways?
@NorthShoreOverland 2 жыл бұрын
Nope. It's underneath it. And with the fairlead opening, you'll get more air than with the bashplate.
@michaelm1105 2 жыл бұрын
Wait you have to cut frame components off? No thanks!
@NorthShoreOverland 2 жыл бұрын
Frame "extensions" It's fine...
@michaelm1105 2 жыл бұрын
@@NorthShoreOverland Not for my vehicle. I think its a poor design by Ford specially when the 250/350 Tremor winch sits so flush behind the bumper.
@TomCrowley 2 жыл бұрын
Does this still only work with the 2.3L?
@NorthShoreOverland 2 жыл бұрын
For now, but they are working on a 2.7 kit. Should be out soon!
@elviscastillophoto 2 жыл бұрын
I may have missed it but how do you free spool the line?
@NorthShoreOverland 2 жыл бұрын
You need to reach down from the open hood to get to it. I'm going to make an extension to make it more accessable.
@bcc1265 2 жыл бұрын
I want one!! #broncochallengecoins
@NorthShoreOverland 2 жыл бұрын
You know, your random comment worked... because now I need to google these "Bronco Challenge Coins"
@chrispark11 Жыл бұрын
Wow, what a nightmare install. There must be a better solution
@NorthShoreOverland Жыл бұрын
Ah it's fine. The other solution is to have the winch stick out 2 feet. I like this much better. And I use it alot.
@indianbill3123 2 жыл бұрын
scary
@NorthShoreOverland 2 жыл бұрын
Wasn't that bad....
@jameswalter6484 2 жыл бұрын
lol
@DUNEATV 2 жыл бұрын
“Tired of getting stuck” “Tired of a weak IFS front end” buy a Jeep Rubicon! 💪🏻
North Shore Overland
Рет қаралды 16 М.
North Shore Overland
Рет қаралды 1,6 М.