I Learned to Weld In 1 Hour

Рет қаралды 13,433

8 ай бұрын

I went from a TOTAL WELDING NOOB to sort of decent in about an hour- check out what I learned that made all the difference! #welding #welder #diy #AnkerSOLIX #LIVEINPOWER #AnkerSOLIXF3800 #F3800
Thanks to #anker for sponsoring this video! Check out their amazing Anker Solix F3800 Power Station! ankerfast.club/s8Pq1l
🎬 CHECK OUT THESE RELATED VIDEOS! 🎬•
•Mech Master's Collab Video: • TOP 5 Mistakes When Fl...
•You're Using the Wrong Screwdriver For Electrical: • You're Using the Wrong...
•6 MISTAKES DIYers Make When Wiring Outlets: • 6 MISTAKES DIYers Make...
📦 PRODUCTS IN THIS VIDEO AND MY FAVORITE ELECTRICAL TOOLS 📦
You can use the product button in the video or check out these links below.
VIEW ALL PRODUCTS ON ONE PAGE ON AMAZON: amzn.to/3rTJfO3
• Flux Core Welding Guide: lrn2diy-shop.fourthwall.com/p...
• Nozzle Gel For Mig Welding, 16-Ounce: geni.us/a4TvYJ
• Non-Flammable, Paintable Anti-Spatter Aerosol Spray for MIG, TIG Tips, Weldments: geni.us/Qi9HOq
• YESWELDER True Color Solar Powered Auto Darkening Welding Helmet: geni.us/xWMlAk
• YESWELDER Large Viewing True Color Solar Powered Auto Darkening Welding Helmet with SIDE VIEW: geni.us/Z39xZKT
• YESWELDER 8" Welpers: geni.us/Bm6Hzi
• Welding Gloves: geni.us/nwfnK
• MIG Welder: geni.us/Pnj7
Any link here may be an affiliate link, which means you pay the same price as always but we make a small commission, which helps out our channel - so thanks!
👍 WANT TO HELP SUPPORT THIS CHANNEL? 👍
Become a channel member! Hit the "Join" button or head to / @lrn2diy
Support us on Patreon: / lrn2diy
👕 LRN2DIY SHIRTS, HOODIES & MORE 👚
lrn2diy-shop.fourthwall.com/
📸 MY FILMING GEAR 📸
Here’s everything I use to film my videos, including cameras, lights, microphones and more: kit.co/nilsynils/my-filming-gear
🕶 SOCIAL MEDIA 🕶
Facebook: / lrn2diy
Instagram: / lrn2diy
Twitter: / lrn2diy
TikTok: / lrn2diy
📲 MORE DIY GOODNESS 📲
Check out our many projects and plans at
lrn2diy.com
📲 WANT TO LEARN MORE ABOUT 3D PRINTING? 📲
All things 3D Printing at The 3D Printing Zone
/ the3dprintingzone
📚 TWO FREE AUDIOBOOKS! 📚
To get two free audiobooks from Audible, just follow this link: goo.gl/QGFC4Q

Пікірлер: 58

@LRN2DIY 8 ай бұрын

Get in early with the Anker Solix F3800 Kickstarter at kck.st/3Q8NKgQ and be sure to check out Mech Master's Top 5 Mistakes at kzfaq.info/get/bejne/hsiAraR_r62VYJ8.htmlsi=mhuV02za0PfDJBf0

@nizada290 8 ай бұрын

As an engineer who didn't do much manual jobs, I can't express enough how fulfilling is the experience of acquiring some practical skills as these. It does pay off!

@LRN2DIY 8 ай бұрын

Agreed! I have two skill acquisition goals this year. The first was to learn how to 3D model well enough to make my own 3D prints. I've been taking lessons on that since April and I'm really pleased with my progress. The second was to learn to weld and even this introductory lesson has been a game changer. Keep on learning!

@GardenGuy1943 8 ай бұрын

@@LRN2DIYWhy not TIG? Do you have something against us?

@LRN2DIY 8 ай бұрын

@@GardenGuy1943 Flux Core, MIG, TIG, Stick - I want to learn them all! Flux Core has the lowest barrier to entry so it's a natural starting point.

@craigcolosimo8818 7 ай бұрын

I appreciate the patience of your friend & his ability to teach in a non condescending way.

@-DIYPRO- 8 ай бұрын

Awesome job, thanks for coming over!!

@LRN2DIY 8 ай бұрын

You rock, Jeff. I really appreciate you taking the time to teach me!

@billlaird7332 8 ай бұрын

When I retired, I set up a shop in my garage to "build stuff." Included was a Lincoln Stick welder. But, I didn't know how to weld. I managed to find a welding course taught as an Arigriculture Extension Couse at the local high school. It was very inexpensive, maybe $ 25, met one evening a week for three hours for eight weeks. It covered primarily electric arc (stick) welding but did include a couple of lessons on MIG, flux core, and gas welding. If you want to learn to weld, check out your local high school or college and see if they offer extension courses in welding. Also, check with your state or county extension offices for possible courses.

@wtchr6883 7 ай бұрын

No beginner has any business trying to weld a car chassis. Period.

@JCWren 8 ай бұрын

Maybe Jeff told you this off camera, but before pulling the trigger, do a couple of dry runs to make sure you've got the range of motion you need, that you're not getting twisted up, and that the tip will remain at the correct angle and remain visible. You may find you need to reposition to get that pass done. You can restart a weld, but it's more ideal not to. It's important to be as comfortable as the situation will let you be. Obviously if you're welding on a car chassis you're not going to be in a seated position at the correct height at a welding table, but make it as good as you can be. Finally, when you get fatigued, just stop. Pushing through is only going to allow for more misteaks to happen and wind up with poor welds.

@LRN2DIY 8 ай бұрын

Fantastic feedback! All of this makes great sense and is absolutely worth sharing. Thanks again!

@ash3945 7 ай бұрын

Watching you learn is very affirming! I’m so used to people (including you!) already having good experience in content like this. Thank you, Nils and Jeff! This was a very fun and informative video. Y’all definitely inspired me to pick this up as a hobby in the near future!

@ThePlatinumFox 7 ай бұрын

Nils, this was great! I know nothing about welding, but always wanted to make it a possibility in my DYI shed. Now I know some more - so thank you! Adding a compressor, a table saw and this type of equipment to a DYI´ers arsenal of tools, makes a huge difference. I am thinking that a welder would do too, but I am still not sure what it actually takes. I mean, are there any small welding sets available and would you consider making a video of how to get started if you start from scratch and know nothing about which type of machine or tread to go for? For DYI´ers that is not going into serious welding, but just want to fix a broken metal leg or similar.

@johnnymerchant 8 ай бұрын

I want to get into metalwork and have been thinking of picking up a cheap Harbor Freight welder and learning to do this. This video is making me seriously consider it.

@LRN2DIY 8 ай бұрын

As another commenter has mentioned, the Titanium series is a nice step up from this and maybe $50 more. Might be worth considering.

@Setstella 7 ай бұрын

Here in South Africa we often have water outages and I am wanting to install a backup water tank system, please do a DIY video for it 🙏🏻

@lordfordification 8 ай бұрын

I learned more watching this than ever before. I might try it

@LRN2DIY 8 ай бұрын

I'm so glad to hear it! And you really should try it.

@gratefulprepsnj 8 ай бұрын

Well done! 🇺🇸

@LRN2DIY 8 ай бұрын

Thanks so much! It was fund to learn :)

@jvazquez53 8 ай бұрын

Not bad, considering you don't have many adjustments on that machine, plus is an AC welder which creates mote spatter. Now you are ready for an upgrade, the Titanium 125. The Titanium 125 is on sale this weekend, $149 with coupon.

@LRN2DIY 8 ай бұрын

I really ought to look into that. I did pick up a YesWelder FIRSTESS MP200 5-in-1 Welder & Cutter two years ago that I have hardly touched so I'll start with that one and see what I can do.

@gregorymacneil2836 7 ай бұрын

I was taught to weld by an expert - it’s not about the welding bead - anyone can be taught to put a good bead down - especially with todays equipment. It’s really all about managing heat and upset (metal distortion and shrinkage) on your project. It is about knowing where to start and stop, controlling heat, and planning your project so dimensions are achieved and distortion is controlled. He also taught me that everyone knows how to use a broom so there is no excuse for not cleaning up the shop floor.

@jayjudd6518 8 ай бұрын

❤ This was wonderful. I’ve stick welded with my own old used welder. I was told I was doing a monkey weld. That is it never got past monkey 🙉. Good teaching😊😊😊😅

@LRN2DIY 8 ай бұрын

Ha! Well, at least you're learning. Keep on practicing - I know I will!

@rmax5150 2 ай бұрын

New subscriber here. Great tutorial and additional info. Thank you both so much for the education!

@harpintn 8 ай бұрын

Thank you for posting this video. I am pushing 60, and wielding is one of those skills I have never learned. I played with a machine a bit with the goal of learning on a previous job, then covid hit and the company nearly went under.

@LRN2DIY 8 ай бұрын

Thanks for commenting. This is definitely one of those skills that, with the right instruction, can be learned to a point of competency with just some practice. I've been practicing since we filmed this and the welds are looking better every time. Best of luck to you!

@harpintn 8 ай бұрын

@@LRN2DIY I have been thinking about buying one of those cheap flux core wielders since I heard about them about a year ago. Maybe I will bite the bullet soon and get one.

@williamhibbard1535 8 ай бұрын

Is anyone type of welding any stronger than the other

@LRN2DIY 8 ай бұрын

According to Jeff (Mech Master) flux core is actually one of the stronger, more penetrating welds. Here's an article that helps to break some of it down: kanyanaengineering.com.au/different-types-of-welding/#:~:text=TIG%20welding%20is%20often%20considered,can%20create%20a%20strong%20joint.

@nizada290 8 ай бұрын

It is also worth mentioning that these welding equipment are very affordable. You can get all set up with a couple hundred to 2k max

@LRN2DIY 8 ай бұрын

Agreed! I paid $250 for everything needed to start welding. It's a really affordable skill to get into.

@wtchr6883 7 ай бұрын

You might learn to lay a bead in an hour. Learning to prepare surfaces and make strong safe welds takes experience and training.

@borisborowetz5226 8 ай бұрын

Instead of welding towards yourself, go left to right if you are right handed. It's much easier to see and control the puddle.

@LRN2DIY 8 ай бұрын

Great tip. Thank you! I have a lot to learn so I appreciate the good info.

@JustNel 8 ай бұрын

His Name Is JEFF.

@LRN2DIY 8 ай бұрын

Did I say his name wrong? Just curious why this comment?

@JustNel 8 ай бұрын

@@LRN2DIY haha no! It’s from the movie 21 jump street where Channing Tatum says “my name is Jeff” a play on that

@LRN2DIY 8 ай бұрын

Haha - ok, my bad. That one went right over my head :)

@raytry69 2 ай бұрын

"Mech Master" Hmm... is he Hungarian? :)

@johnnyllooddte3415 7 ай бұрын

both welds would be failed by an inspector

@uclajd 7 ай бұрын

Can't say I'm a fan of the sit back and make fun of the NOOB pedagogical method. Nobody is an expert at everything.

@michaelvaughn7137 7 ай бұрын

No you learned to put metal together that's it but keep at it and you will .

@ralphnewcomejr 7 ай бұрын

You learned to slobber on a "sort-of" flat bead....Thats it.

@OVERKILL_PINBALL 8 ай бұрын

You are actually selling that guide for $5?? Should be a free download...

@tubbygreyed5636 8 ай бұрын

Unfortunately the poor economy affects everyone.. even prostitutes.. Biden did that..

@LRN2DIY 8 ай бұрын

I think it's worth $10, at least. It's a fully illustrated guide that reminds you at a glance of every step to getting better welds. I don't work for free and after spending 8+ hours making the guide, yes, I'm going to charge for it.

@tubbygreyed5636 8 ай бұрын

@@LRN2DIY As the Seller you get to set your price.. Supply and demand will determine how accurate your pricing is.. Good luck..

@OVERKILL_PINBALL 8 ай бұрын

@@LRN2DIY but bro.. you literally just learned how to weld and within one day you are selling guides to people? Again, I think this would have been a great thing for your subscribers along the journey with you and not become a monetary item. #respect

@TheNicko773 7 ай бұрын

@@LRN2DIY I'm retired comfortably at 50. "your time" is calculated very differently between you and the customer. Think long term.

@janeiro301 8 ай бұрын

Hmm the background music is annoying :/

@LRN2DIY 8 ай бұрын

Noted. Thank you for the feedback.

@janeiro301 8 ай бұрын

Forgot to say, its mainly when people are talking and the music is on, its fine when nothing is being said tho, ty for the reply@@LRN2DIY

@trekgod3 7 ай бұрын

The focus on this video is horrific. The right half of the screen is completely out of focus. Maybe using the wrong aperture?

@LRN2DIY 7 ай бұрын

You’re absolutely right. It’s my fault for setting the FStop too low and not paying better attention to the focus. We debated scrapping all the footage but worried it would come off as fake if we had to redo it all, like I was learning it for the first time.