*EDC Gear Parts List Here* bit.ly/3qrZVv4 *Insane Deals & Codes* tactical-toolbox.com/deals1/

Gun stuff starts at 34:15

I’ve been carrying an xl with a Wilson combat and a 507k for 2 years everyday. They gun stays loaded unless I’m dry firing. Around 2k rounds of all types. Zero malfunctions of any kind. Great little pistol! Lights out accurate! My buddy who was a ranger in the army was looking at it when I first got it and dropped the slide on concrete directly on the corner of the rds. Little rash but still held zero and never nd’d. Love this little pistol!

Thank you for sharing! I just recently received the P365XL back from Sig. I am currently testing it and I will post an update video as soon as I'm finished.

I dropped my p365xl more times than i can count on hands and feet (yeah I’m that guy) without it ever going off. Needless to say something looks funky about the test the other guy was running.

that Warpoet - such a good daily carry;)

The fact that Howitzer actually listened and fixed a manufacturing issue with their jeans, because mine ALL break at the back pocket as well.. that's friggin pretty awesome. Great to know, I wear a 30 length so I'll have to hem mine, but I may start buying from them.. Thanks for the review - never watched a jeans review before!!

On the p320 my personal opinion is that the user can remove the FCU for cleaning ect. and cause problems during process of removing, cleaning,and putting back in if user is not knowledgeable of the FCU component. Also it doesn't take a genius to figure out how to mess with the FCU to make it do "weird" things to get KZfaq views

I've had p365 and p365 XL for several years without issue. However when I recently picked up a p365 X Macro I noticed a similar trigger and striker hang when dry firing new out of the box. When live firing for the first time the issue never presented itself. I'm about 700 rounds into it now and no issues. Definitely something to watch for though.

Hey thank you very much for making this video. I know the amount of work it takes to put something like this together. So I just wanted to say thank you for your hard work. Very cool stuff!

It’s pretty cool that you single handedly played a huge roll in fixing a massive qc issue and that they addressed it that fast

I didn’t use to like Olights much. But i did have one in my car. And similar to you I stuck it in the wheel well to change my brakes. It stayed there until the next time I changed my brakes. Somehow never fell off. It was muddy and the black finish was mostly worn off, but it still works

Love your stuff brother! Keep it up!!! I'm excited for the x macro testing I have one carried it everyday since it came out and I love it!

Love your content it got me into building which made me realize my love for building and just any pew smithing please keep up the fantastic work! Wish I could be there for your online courses

Don't worry about the censorship bro. I will find your videos and watch them because I always learn something. Love the channel.

Tip from a guy who found this community from the Knife EDC community: at 0:30 you want to sweep the stone across the entirety of the blade in one complete motion, and then repeat. Sharpening sections of the blade individually can lead to an inconsistent edge/ cutting performance. Nice knife, SOG have improved a lot since 2017, and great video as always. Edit: that Pentagon OTF is beautiful. I had one that I ended up selling and boy do I regret it now. Also the Terminus SJ a slip joint, which means it does not have a lock.

Love your content! It’s so nice and not totally bought and paid for 😂 it’s genuine and honest!

Been carry the p365 NRA edition for 4 years now everyday. Never had any problems out of it. To my understanding it the same trigger assembly in all the p365 series.

Very cool video. “Almost Worthless” heirloom firearms are usually the most priceless in my opinion. I think the stories behind family guns are always interesting.

Excellent video as always! Can’t wait to see the M&P 2.0 Metal review. Take care, love the channel!!

Doing my part to boost your KZfaq algorithms by liking and commenting. Subscribed and hit bell a long time ago. Keep up the fight against censorship and promoting 2A rights.

You covered so much in this video.....thank you first off for all your effort, knowledge and experience. Its such a big help especially with sorting though the insane options we have available, I was about to start that sig build but the firing issues keep coming out so I'm holding out, can't wait to see your tests. Thanks again for all you do it's an honor to be a loyal fan/subscriber. Oh also I really enjoyed the way you did this EDC video sectioning out each individual item great job👍

Super excited to subscribe to you channel and hopefully someone else will be able to see the need to own or carry a firearm! We need more people like you 👍

So in that video with the 365 it seems less like an issue of the gun going off randomly and more not going off when it's supposed to, I suspect that the sear is getting stuck on the striker edge when the trigger is pulled and the shake is releasing it, my guess is it either wore in weirdly or I have seen some cases of the grip module seemingly being molded wrong and letting the fcu to slide back ever so slightly with the trigger pull and preventing full travel of the trigger which would more be my guess as to what is happening there, with the icarus grip being precision milled I would not expect to see the same issue, could be totally wrong as I haven't experienced the issue so that's just what I have theorised seeing some videos and the three different 365s I have pulled apart, the reason I also mentioned the wear is that the back of the sear does have a little shelf in the under edge of it that I could see catching on the sear under certain conditions

I have the M&P9 2.0 metal. Great firearm. The wife and I have been shooting it at the range now for about 2 weeks and 600 rounds. So far this is dead on with just normal sights. I have the medium backstrap on it, which works well for both the wife and I.

Keep making vids! Don't let them hold you back.

You da BEST!!! Merry Christmas to you & yours🎄🇺🇸🤘🏽

Keep up the great work

I trust my XMacro, but definitely curious to see what your testing reveals.

The crazy part is that leather fold in the wallet is for this old paper stuff called cash😳

Great info! I like a variety of information for EDC!

🙌🏽🙌🏽🙌🏽I’ve been waiting for this!

You are doing an exceptional job, Bro! Keep on rockin’💪🏻🇵🇷

I love that we all are here to answer the basic question of 'what is in your pocketses'

Another great video!!!

Excellent video! Awesome coverage of multiple topics. Keep up the great work, I really appreciate you! I owned a 365XL for about 2 months. On every range trip the follower would stick in the mags and only the top round would feed. It was pretty surprising to me being that up to that point every Sig I ever had was 100% for me (I never owned a P320). Taking the mag apart, cleaning them, de-burring rough spots or excess plastic on the followers, ammunition changes, etc...none of it ever fixed the problem. If the 2 factory mags that came with it wouldn't work I wasn't about to go buy more. I just sold the gun and went with a Glock 43 to fill the role the 365 was supposed to fill. Now I'm looking at the Shield Plus to share duties with the G43. The whole magazine issue just pushed the 365 out of consideration for me when there are now many more options comparable in size with excellent reputations for reliability. The M&P Metal is beautiful, it will be my next purchase! Again, thanks for all you do!

PLEASE do that testing with the X-Macro.

I've owned a p365xl for about 2.5yrs. Never had any issues with it. But I'm very curious to find out about his issue

Cool. Great info and will definitely consider these options. Thanks again.😎

Great show as always matey. Have a great Christmas & safe New Year. Warm greetings from Australia.

I rock my 365xl everyday.

Just want to say, you definitely helped ease a LOT of my fears about purchasing firearms. One of the first videos that I stumbled upon of yours, you'd kinda mentioned that you were in a similar situation when you started looking at your very first purchase and how you went about it. This was critical information for me to finally feel like I could actually go in and have a general idea of the etiquette and specifically sorta what to be looking for as a first-time buyer. You were a huge confidence booster, for sure, and a day or two after seeing that video I got myself a Del-Ton Sierra 316L SXT/Ergo as well as the full armory toolkit that you'd suggested because I would love to build my next rifle to really make it my own. Thanks man, you're kind of a hero lol

Great video thanks,

I have a dream that when I'm in AZ at a Gun Show or visiting my daughter I happen to see you and we get to chat for a bit. I appreciate you and your content greatly. Have a Merry Christmas, Brotherman!✌

You inspired my wife to open up and purchase a gun for her self. And I thank you so much for that. Now we have more fun than fever had in 22 + year's!

Its one of the most popular edc guns, I've carried one (summer) and a 320 (winter) for the last 5 year every day neither have went off. I also own 3 different kinds of 320s and dropped one off a roof when I was working loaded. I have a apex trigger in mine too so 30% lighter trigger pull.

Can't wait for the review of the M&P 2.0 Metal....and idea when you think you'll publish this? Thanks for the great content!

i think these videos are the best. very interesting and informative. great job bro

Love that X Macro with the Icarus grip. I just wish they would catch up production so I could buy one! Also, I’ve been getting so frustrated with finding holsters for mine. Not having KZfaq money to just experiment with the internet to see if they will fit with a light is a PITA. Thanks for the jeans recommendation. I’m a wounded warrior and an amputee so jeans are a challenge to find with skinny jeans being the norm.

Cool review of your stuff I never had luck with SOG. I went through 3 different knives that just would not hold edges more than a few days and switched to a ZeroTolerance.

Great video. Helping the algorithm.

Thanks for the info

I have carried a 365xl for 3 years. I even chambered a round stuffed it in my tank bag and road 6k miles off road across the US in 2020. It never went off and that was enough of a pounding that the red dot was way off and could not get zero again. But that is just my experience with the gun.

No blanks! That's a full or almost full powder charge and a wad blasting off in unpredictable directions!! Primed, empty brass will serve the purpose for your tests without the risk.

Good to see the tier 1 macro holster fits well with the Icarus grip module. Here’s a question you may have some insight on. If you had the Icarus macro grip but with an XL slide instead of the macro, do you think the tier 1 macro holster would be a better fit than the tier 1 XL holster?

This is awesome to know. I can attest to the howitzer jeans. From your review, I bought a pair directly from howitzer. They are the best pair of pants I have ever owned. I'm currently setting little bits of funds aside to buy my next pair. They are incredible! I cook for a living and between that and projects around the house I'm pretty hard on my pants. Like I said, I've had mine for about a year and get excited every time I put them on. They have stood up to everyone I have thrown at them.

Never had any issues with my P365XL.

Ive carried the benchmade infidel for 6 years as edc, its been fantastic. Just clean it out with air and some clp ands good as new

I haven't seen any of your vids in a long time! and I have been subscribed for a long time, so I'm glad I ran across this one and now I know why! KZfaq needs to get right before someone else takes the title! Keep doing your thing man!

Checking out yours and others on guns and signed to take classes. Thank you for your information.

Don’t doubt some people have issues with striker sigs, but if Aaron at Sage Dynamics trusts the XL and Macro to run in his classes after the abuse he puts them through, I think they’re good to go. Look forward to more testing on your channel

You do you but I’ve been carrying a p365 for years daily

Love your videos

One incident and you're ready to give up?? Working in a gun store back in the 70s a woman returned a Colt Gold Cup 1911. Her complaint was that when she pulled the trigger "ALL the bullets came out." I thought she was referring to a dropped magazine, but she corrected me. She meant that every round fired with one trigger pull. We took it upstairs to the gunsmith who verified that it was a full auto 1911. We had to test it several times to see for ourselves. Since that day, I have owned several 1911s that I bought unafraid. I think you should too in this case of the malfunctioning P365.

One thing that nobody can deny how fascinating is that SIG 320 can discharge without a trigger pull. Kudos to SIG design engineers to come up with this unique feature. I am a reputable design engineer myself with proven success of designing complex mechanisms and machineries and as a gun enthusiast I feel I could design a pistol, but I am not that good to design it to discharge without a trigger pull. This is beyond my ability. Even though I am fascinating with SIG 320 I have no desire to get one. Ever.

Thank you for the effort put into this video.

I don't run notifications on any channel. But I've been a subscriber for a long time. Always thumbs up your videos. Cheers.

I’d love to see the follow up regarding the x-macro testing. I was just about to order one as my new edc but maybe I’ll wait. I also appendix carry soooo, yeah I don’t like that lol

M390 is a higher grade of steel, but it's also a harder steel to sharpen. The edge will last you a while, but sharpening could be a hassle to sharpen if you aren't into sharpening. S35vn would be a much nicer steel for those that does it once in a while.

Did my daily 1 million subscribers entries and re-watched this video to update my last minute Xmas wish list while sipping coffee. What a great way to start a Saturday morning.

Exxxxxcellent video! Thank you!

44 min video about "why I'm not carrying the 365". Doesn't get to the topic until 42 mins. Lame.

Eager to see the Sig testing…..my XL pointed at the biscuits makes me nervous, too!

Another comment for you about the rings... I used to coach my sons baseball team, and the opposing coach was screwing around and jumped up to do pull ups on the fence of the dugout. His metal wedding band got caught on the fence and when he let go it ripped his finger off... and it couldn't be reattached. This isn't the only story like this I have heard about. I've heard of other people that work with milling equipment having the same thing happen. Anyway, I wanted to tell you because I also switched to the silicone ring, and highly recommend that anyone that does anything active do the same.

I agree on the Kore Essentials belts. I tried a Blue Alpha belt (Hybrid EDC with the cobra buckle in tan) and, when I wasn't wearing a gun/holster, but had my shirt tucked in my khaki Levi work pants, I was "made" by a customer I was meeting for the first time. It just stood out. He's a hunter/fisherman type, but not the type who carries a gun everywhere/every day. The Cobra buckle also rattles a lot. While it is very strong, the latch and the buckle don't fit together tight enough to prevent rattling around together. I wasn't worried about being made with my shirt tucked in because I can't carry in my customer's facilities and I wear my shirts untucked outside of work. But the noisy buckle had me selling it. I went back to a plain-jane brown leather belt. I dress like a typical suburban Dad, in jeans/khaki shorts, white undershirt, and a button down fishing shirt or t-shirt. I forgo the white New Balances and calf height tube socks though, preferring Altra's/Merrell rail running shoes and Darn Tough/Smartwool no show socks. I've owned everything from cheap department store belts to a "gun belt" made by Amish folks (and sold on Amazon lol) to Magpul's version with the polymer inner layer. I buy Hank's now, and I'm very happy. Happy enough that I also use their wallet and their Apple Watch bands. The belt I use every day for work and carry is their Stitched Gunner 1.5". I've had mine for over 2 years now and it's still in perfect condition.

I’ll be the black sheep, I edc a Taurus pt111 G2a. I’d rather keep my expensive guns for non edc. But Iv also never been a sig fan either.

I saw this video and with this FCU you MUST actuate the trigger to disengage the internal safety for the gun to fire. I still carry my Sig P365X appendix after learning how the internals are different from the 320. It's a safe gun as long as you protect the trigger, as you should.

I like what ever you do about every presentation you do and I never seen you do any type of build keep doing exactly what you doing good job

Just ordered that m&p Thankyou for such a clean affordable option!!!

PROTIP: Don't move a sharpening stone up & down on a blade. Down sharpens the edge, up ruins the edge because you are grinding against the gradient. Only sharpen downward.

Elon needs to buy KZfaq and release the shackles

I love your channel I’m new and ya KZfaq has taken guns of my fyp

Love your content brother keep it up.

Let me fix it for you. Multiple police departments with negligent officers with unsafe practices. Just common sense.

Sig boys - “imagine owning a glock, my Sig cost 2x your glock brokie” Glock boys - “Good luck with you discount sex change”

Thank you for the Jean review because I've been deciding if I should get a pair of those jeans

Cheers from Oklahoma brother great work and informative

I own a few SIGs (P320 X5 Legion, 365XL and the 320 RXP XCompact) all have X-series straight triggers. Firstly I have never had any trigger issues with any of my Sigs, so I count myself lucky amongst all the lawsuit and video content people who swear by faulty designs. But I must say that the TacticalAdvisor vid shows someone pulling the trigger slowly to the wall and then an abrupt shake makes it fire... Hmmmm. Maybe... But I will wait for your review. Keeping dropping excellent content.

I have a p365 xl and have encountered a similar issue with a delayed bang when the trigger is pulled. It only happens when i have an aftermarket Zev slide on there though. The stock side and internals work great, the Zev slide with oem Sig internals cause a delayed strike when the trigger is fully pulled. I've read around that it might be the striker safety getting caught up with tight tolerances. I haven't broken in the Zev slide yet to see if the issue would go away but I'm hoping it does

Thanks for the tip about car keys and Ravelco!

Here for the support and love the content

Thanks for explaining how the notification & subscribe button influence what we watch. I’m always in favor of being able to control as much of my life as possible.

Thanks!

Nice one bro 👍

When you brought up Kershaw it brought to mind my Kershaw Brawler which I’ve had for about 5-10 years now and it has held up extremely well

I’ve been subbed with the bell, but dude you’re awesome so I’ll drop a comment for now on just in case!

So excited about the m&p 2.0 metal

I really enjoy view your videos very informative

you are an inspiration

Hahaha that skinny jeans bit had me rolling 😂