I like coming back and rewatching a lot of videos from my favorite tree channels, August Hunicke, Guilty of Treeson and Westcoast Saw. The main thing I take away from all 3 is, the comradery. Ole Dan just gets in there and bangs wedges and at least on video, doesn't complain and just keeps going. Gaining all sorts of knowledge and doing what it takes. I dig it.

Great video, perfect for a Friday night watch. Also really liked the 661 tune up you did with Jacob, you guys work well together, hope to see more like that, thanks! 🙂

some really big trees that you took down! great job.

Another great video. I love watching you guys getting out there and cut. I’ve been operating heavy equipment doing site development and underground utilities for just shy of 20 years. I’m just to damn old and broken at this point to take on a new trade but I sure like going out out on a weekend and helping some buddies do tree work. I’m down here in the graham area. Anyways, Mr west coast, I can’t be the only one that would love to see a video doing a walk around of all your beautiful trucks. You’re teasing us gear heads every time you pan right on past one of those bad boys like it’s not even there. There definitely something to proud of, give us a little closer look… build specs, engines, axles… I’ll talk all you give me. Thanks Gordy. Here’s to you and your continued success. -Ryan in Graham WA.

That tip on ream bucking is pure gold. Thanks for passing that along! Going to try it out this weekend.

What a great show today!! Thanks guys.

What Mike said about crossing the trees to keep in lay with the bend in your strip was a good little touch in there… not many people will comprehend that but I get what your doing. Good work Gordy.

Let's go! Just binge watched a bunch of your videos after that awesome breakdown vid you did with Jacob. Keep 'em coming Gordy!

I still have a sachs dolmar 112 my dad bought in the 80's. Use it weekly on the sawmill to trim up logs. It screams. Not a light saw but a good saw for what it is.

Love the video! Good info!! Have a great weekend!!

Never gets old listening to tuned saws Screaming, and the as those beauties starting to move

Great work guys. you guys were having alot of fun out there today. Excellent video Gordy.

I enjoy your videos. Thank you for putting them out. We don't get to see much big wood here in Maine anymore. Just want to say I'm running your bark box on a stihl 400. Absolutely love it. Dogs and air filter are great also. Keep up the good work.

You are the man, , watching you fall trees, and your little buddy Jake climb trees have inspired me to quit my job and get into the tree cutting industry, keep making the videos boss

Awesome video love your products keep them coming

I always appreciate your videos and look forward to them very much! I really like the technique demonstrated for top compression! I know there is regional jargon. I thought that on the West Coast they refer to that as "reaming the cut". Here on the East Coast we call it the "see saw".👍

Hard, dangerous work, but you guys make it look easy. Excellent video.

I like the new intro! Looked like a fun day of cutting with a great group of guys. The Makita is running great. That filter took a beating. Nice thing about foam filters, rinse lather repeat.

The skill level is amazing without trying to dazzle with a lot of BS , Thank you guys a very enjoyable presentation.

Awesome cutting video the 7900 runs awesome I’ve been looking at getting one .

My Pops used to have an old bleach bottle and Prestone jug for gas and bar oil 👌👌 Only thing was it wasn't bar oil he used, it was used motor oil in his Ol' O38. miss that guy every damn day no regrets

So stoked I found your channel brother! Seems like you guys have a lot of fun at work!

Always a good time with you brother. Thanks for always givin er 110%.

Very nice channel i learn alot from your videos! Would love to see a tour and storys of the trucks i see in the shop 🤠

That dolmar is actually a nice saw!! Would love to see a video of your old trucks. They're all beauties.

Another absolutely outstanding video you have made / produced!!

Awesome Video Gordy!! I love watching your videos!👍🏻👍🏻

Can’t wait to see parts for the Dolmar’s!! Would love to have some dawgs

Would love to see a vid about your different square grinders and the pros and cons of each.

Thanks for Sharing brother!

Looks like you guys are having too much fun gordy 😎 keepem sharp

such a good video Gordy! love the new intro love the tree falling videos.

Awesome video. Real men doing real work. Got your clutch cover, bark box and 3pt dogs for my 462cm. Love everything. 3pt dogs are a game changer. Great products. Glad to see they are made in the USA.

6:27 beautiful work Dan

Hell ya this is what I am talking about didn’t know if I was going to be able to go much longer with out a Gordy video!!!! Keep them coming Gordy!!!!!!

I like the videos. Keep they coming. Great job.

Sweet video!I have a 7900 that Nick ported also! The thing is a beastie!

Looks like a fun day! That Dolmar sounds lean Gord.

Nice video Gordy! I had to laugh when you were cutting the uprooted blow downs; the other day I had an uprooted black cherry that I thought would be neat to get a video of flopping back down when I cut the tree off. I set the camera up made the cut and there it set! I could probably cut 20 without a camera on them and they would flop one way or the other but not the one I wanted footage of:) I am glad you are sharing your time in the woods.

great video Gordy! love the videos you have been putting out.

Really love that saw! I had a 7310 that I loved but it got stolen out the back of my truck. Can't find anything new that I like half as much as that Dolmar.

Great video Gordy. Thanks for bringing us along. Also dig that Chevy in the shop on TSL's. New Project?

Boy, that 7900 is rippin- I have the same saw in the green, very dependable-

Good Stuff! Thank you

So happy when I saw you started up your own channel brother! Missed seeing you guys on TreeSons show. I’m subscribed!

Funny thing is I did the same bucking on a fire clean up job and my employer said it was unsafe to widen the kerf bucking,he was always hung ulnd wedgin himself free. I sure do miss falling valley fir so much easier then pondos in eastern oregon. I am pretty much outta the game but still ove to knock down timber when I can.

Chips be flying👌😎

Yup. Good stuff. Keep'em coming. Loved you and Jacob on the 661 vid and commented you should call him Kryptonite for making you weak and feeble 🤣 Of course, that would make you Superman 😎 Peace from Mark in Scotland

Makes me want to go tip over trees with my 7900. I have the older pre-cat era, was a decent saw stock but really came awake when I ported it. Added a port to the muffler before I even ran it, so I guess I don't know how it ran bone stock.

The Dol-kita definitely ain't lazy! Hope to see another day of shade reduction Gordy, safe cuttin pard

Could you tell us about your fuel and oil you use? Maybe mix ratios and general operating tips for prolonging a saw? Thanks for the vids and products!

Music to fall asleep to

Man, that saw screams. This makes my stock 390xp look like a poulan pro from Fleet Farm. Side note: I wish we had a US chainsaw manufacturer.

That dolmar is a nice machine

Love the content Gordy, I just picked up your leather 6 point liner for my McDonald hard hat. I’ll be posting a how to video for putting it on the hard hat tomorrow. It’s a really quality liner, but then again, you already know that.

Cool video, that Makita rips. Didn't even know they made saws.

Good times!!!

Dang, wish my 7900 ran like that! 👍🏼

Nice work

This video taught me ream bucking. Thanks

Excellent. Video

Make a clutch cover for the 7900!!!

Cool. The best part of this saw video is little talking. Woo. Some of those other saw videos, they just don't stop talking about themselves. Good video. Keep up the good work. Thanks

A 440 muffler fits those saws you should totally put a bark box on it 🤘🏻 great video I like the custom choke lever

"""""""Love It,!!!! Kick Tail Video!!! A Tree Huggers Worst Nightmare!!!! 😁😁😁🤗🤗🙂😉😉👍👍. Like Your Fellow Tree Fellers!!! They Are Real Cool !!! Seem To Be Hardcore Tree Fellers!!! That's The Best Way To Learn, """From Experts!!! Love That West Coast Saw Shop!!! I Like That Work Bench!!! 🙂😁🤗🤗🤗👍👍. Saw Did Real Well!!! Another Good One Gordy!!!

Gordy, the old Makita 7900 is my favorite bigger saw to use. I'm in my sixties & only cut on occasion now but think it has the best power-to-weight & ergos. Can you build a bark box muffler for it?

Hey man, I loved the video thanks for posting!!! Quick honest question since I've never done this kinda work, do you guys have to worry about tics, and chiggers, and other bugs, and is that a problem out there in this line of work especially if you're in the woods!?

Saw is ripping through it that's for sure! I run a 143 Dolmar and it sounds just like yours, really is sad they (company) won't be making them anymore.

no wedge required 1:08 just pushes them over.root balls are no joke never know for sure if they are going to sit stand up or roll over.

Awesome Video.

nice to see something other than stihl and husky

I’m jealous of you guys out there. You get to fall those big tall firs.

You should make a run of those front plates exhaust ports for the website. It’s pretty sick.

Like the intro Gordy

thanks for the great content! how do i get to watch in real life

Was the place thinned too much, giving too much wind exposure to the remaining trees?

True bad ass.

Heck of a video Gordy

César 🌬️❄️🥶🌨️

Awesome video Gordy! I really like that shell casing on the choke lever. Are those bumper strips for the dog bolt in Jacob's video available for all of Stihl's pro saws or just the 661 do you know?

You are going to have to do a video on the trucks

That's a good tip about pinching. or you curse for an hour and get another saw like an idiot like I do.

I would be great if you guys came up with dogs for the Mikita/Dolmar EA6100.... All the Dolmar guys can't find duel dogs for that saw and would buy them up. Hell I'd get 2 sets myself. Keep up the great work.

Makita’s are made by Dolmar, and I heard that Dolmar had the very first patent for a chainsaw. That have been doing it for a long time.

I enjoy y'alls videos just curious what kind of oil yall use that makes your gas -oil mix look blue and iv noticed some of your bar oil looks red and some looks purple

Great job not giving up an inch of that wood.

What bar is your friend running on the 462 a 32 inch?

I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.

Id love to see some of these west coast guys come to missouri to cut some oak, hickory, sycamore, walnut, etc. It would be interesting..

Absolutely Love your videos and products! I am a big fan of the Husqvarna 266/272 models. Are you gonna make some dogs for that series? I know its a long shot being an outdated model and all.

Since you are no longer tuning/building saws... Who would you recommend to do a "basic" tune? Preferably near Spokane, since thats where I live. Though if there's nobody...I'm willing to ship the power head.

Dam, Gordy wicked new intro. You're getting all fancy on us -- next thing you'll do is become an arborist... 🤣🤣 Just kidding! Great work and keep the content coming.

When you double stack wedges, what’s the best way to prevent them from bouncing back out? Probably not a once answer all question, but I would imagine using proper wedge size compared to the stump has to be it? They sometimes pop out on me

Whats ur thoughts on the makita??

Are the Walker bars rebranded Neo-tech bars?

I have a 261c Stihl that came with an 18" 0.063/.325 bar and chain, and last fall I upgraded to the 20 0.063/3/8" bar and chain. what accessory upgrades would you recommend for my 261c? I'm also curious as to what bar and chain oil you use in your chain saws. I've been using the Stihl brand for the bar oil and premix. Do have any recommendations on bar oil that will make it easier on my chainsaw?

👍🏻

Hey gourdie love your videos and your work. Your inspiration got ? What's with the Gatorade bottles

Nice Worke! Whats in the bottle?

What’s in the bottles you all are carrying around your waists? 🇨🇦🇺🇸