I like how he doesn’t give up I would’ve gave up half way

Remember all these OG’s when u blow up

I like that you’re a science man now

Came from your DoorDash video and I'm hooked! I have an insane amount of respect for the time that goes into your editing and all the small things you do for your content that really add up. You are going to be huge one day man!

Breaking news: man puts in hours of effort to creatively dump water onto the floor of his garage

As a Fishkeeper you just saved me from drinking many more gallons of fish water

Girl: "I think Chay is cheating on me.." Chay:

That thread is for threaded pipe like threaded pvc, not “flexy hose,” but if it works, it works. Prolly wouldn’t hold an pressure though. Pvc is also made to be glued, if you needed it to hold much anything you have to glue it.

So many dads are furious that he used duck tape on pvc pipe where tf was this mans dad when he needed him

Most people try to keep water out the garage -you, try to fill your garage with water. You deserve a sub!

I wish his KZfaq got as many views as his tiktok got

Just remember we when you blow up that’s all I ask

This guy is going to be like the next mrbeast

Someone should put a syphon in a lake, that’d be funny.

I love how excited you are about this project and hope you continue to grow your passion😉

i love ur channel you do the things other youtubers would never dream of doing because they're so difficult and tedious

Bro your a great KZfaqr for real! I found you on my recommendation and I’m still trying to wrap my head around of how you got so little views:(

Bro how can you not love this dude! 🔥 most underrated youtuber out there!!

I love watching people learn.

1:26 this is called a laminar flow

i love seeing him happy keep up the good work

I have watched every vid all of them amazing even your channel trailers!!💯 🔥

Great Stuff!! Aside from the sealing of leaks, the reason you pipe worked when it was shorter was related to 2 things. First is the inertia of the water moving down the first leg, it's kind of a balancing act to get enough downward force to push back up the pipe towards the drain. and second, is the angles. Your pipes with the clear tubes made essentially right angles which reduces speed and requires more force directly against gravity to come back up. This is why the smaller straw ones work as they are more a V than a U.

Keep up the work this is class

Love your vids bro keep grinding

I watched i bunch of your vids and man they are good and they are very interesting

I've just binged all your videos looking forward to more

Your happiness when it worked made me subscribe

Holy shit man you’re growing so fast, I subbed yesterday and I think you were at 54k good job man you deserve it!

I made my way to this channel just from KZfaq. I’ve never seen him on tick toc but I’m happy I’m early to his channel before he’s a multi million subscribed channel . He kinda like airrack

I found this dude on TikTok and I’m glad I came across that video. This channel is cool as hell.

I’m so happy I found this channel yesterday😁😁

When trying to bend pvc pipe or tubing, fill it will sand. The sand will help keep the shape of the bend when bending

Loveee your channel man 🙌🏻 Just bought some merch too! Keep putting out great content 😄

remember me when you’re in Hollywood :D

Jejeje. Me encantó tu perseverancia. Pero así es: Prueba y error y hasta que funcione. Sugerencia: Sólo dobla con "calor y arena" la manguera flexible, le das la forma y listo. No necesitas PVC. (Así me hice el mío para extraer el agua de mi acuario). Saludos desde Puebla, México. Nov.28.2020

Dude I am a huge fan glad to be here before you blow up remember me when you are famous🔥

Aye bro, keep it up. Once you start gaining traction and start making some more money. You’ll really be able to step things up to the next level

His channel is growing crazy fast! I subbed when he had 30k wow!

This is some good content I can't wait for you to get big.

Keep up the great work you’ll be at 1 million in no time

Thanks Guy! Now I am gonna use it to distill water

“I was just trying to get a drink” 😂😂

I was watching this man abt a few weeks ago when he was around 20k and now he is 80k that’s crazy how fast he is growing

Thats sooo cool! Does the self starting syphone continue suction even after refilling the tank while the syphon is submerged to water tank?

Pex pipe would’ve been the best choice and you can actually bend it when you heat it up and it doesn’t burn. I did one out of pex to drain a swimming pool and I simply put it completely under water then pulled it out of the water very fast without taking the whole thing out and it began to drain and continued to drain

You deserve millions of subscribers🤩 Oh yeah btw u got +1 subscriber

This is going to blow up for sure

Subbed before 100k gang

This guy is definitely gonna blow up

I LOVE THIS

You’ll make it big one day keep doing what you’re doing

Where’s all the views you deserve amazing job!

god this dudes channel it literally only adhd thoughts and experiments and i love it adhd go brrrrr

After watching several videos on siphons I learned you need to have the hose air free. Some submerge the hose in water to take the air out. Others seal both ends after submerging.

I Have to say your dedication for your videos are crazy i’m working on my channel and I try my best to do good edits but takes forever I respect all the editing you do and all the time and effort you put in your videos please remember me when you become more famous

You deserve wayyyyy more subscribers

Love your content man, keep it up, also is there like a PayPal link we can support you thru

Cool videos man! Never saw anyone "thread" soft tubing before lol.

I really hope this guy hits 1M

I might subscribe, President Clay

"guys if this works I really need you to subscribe" I subscribed about a minute before that point

You should make it so it shoots water back up into it so it’s a fountain

Ahh yes the Genius he is truly a man of our time love the Technique

Okay wow. People who don’t believe u are just people who are jealous love ur vids keep it up

How do you only have143k subs your content is 🔥

try baking the pvc slowly in an oven or toaster oven, then bend it. ^_^ cool video!

i love this video

"duct tape because its air tight" me: lmao xD

If you want to bend pvc fill the tube with sand and then cap both ends and then heat it up

The first elbows you used might have been thermosetting plastics that’s why they burnt when you heated them so next time when you are getting elbows that you want to bend get thermoplastics which can be remolded

Can you just make a frame for the hose/bendi pipe?

Nice work man, I like your enthusiasm. Reminds me of the first time I got fire from rubbing sticks together - pretty f'ing exciting. No cameras though, and no KZfaq to post any video on anyway. Then again, it's really not that hard, just technique. You might have fun trying it. I experimented with a lot of different fire making techniques and let me save you and your eyebrows the trouble of taking a bullet apart and using a magnifying glass on the gunpowder inside. A small pile of powder flares up nicely - I don't remember, but a foot or two high at least. That a fire does not make, so I put the powder in the "bird's nest", the ball of papery bark tinder with a dent pushed into it to hold a spark from whatever process you're using. You'll use a bird's nest rubbing sticks, because you just make a "coal", not an outright flame at first. You carefully put the coal in the bird's nest and blow and blow until that thing is smoking like a steam engine, and you're wheezing like a steam engine without enough steam, and eventually the air, heat and fuel decide to do what they're supposed to do and ignite into flame. Hope you have the beginnings of your intended campfire ready, because you've got a ball of fire in your hand and the last thing you want to do is drop it and have to start all over. Anyway, I digress, back to the gunpowder. Once I saw how easily the powder burned with the magnifying glass, I took apart another bullet and poured the powder in a perfectly prepared bird's nest. Well it lit just as fast, but it flared up more than "a bit" more than before. I hadn't considered gunpowder does its best work under pressure - literally. Some of the powder had fallen into the tinder fibers, plus I'd kind of squeezed the nest in a little tighter, closer to closed, and it acted similar to how it does in the rifle. It wasn't nearly the pressure it would have had from being capped by the bullet and the riflings of the barrel, but it WAS plenty enough pressure to blow that bird nest into a thousand flaming bits of tinder, all in the proximity of my all-too-closely studying face. Of course, eyebrows do come back, but not nearly fast enough when you're really wishing for some new ones. After dozens of experiments with wax, steel wool, sticks, batteries, glass and etc... I figured out your best bet in the wilds is a Bic lighter - ALWAYS have one, or better yet a few. Cotton balls soaked in petroleum jelly makes perfect tinder, even if it got wet. But back to your siphon, good job again. It sounds like it's most definitely the biggest one you've ever made, but you might not say a whole lot around anybody who understands how hydroelectric dams work. Engineers are the worst, they're real know-it-alls. As in, they really do know it all about dams and siphons. Otherwise, keep on experimenting, you might come up with something brand new. Like a way to grow back eyebrows overnight.

Bro never give up on your experiments

His channel is about to be huge

There was actually a hose with spirals outside it and it is flexible like the one in straws

Amazing vid

How much time required to empty the 100 liter water through this pipe ??

You growing subs fast!!!!!!

Bro your so underrated

Your gonna be big one day

This is how I clean my turtle tank every week but instead I use a big tube.

Back in high school (94) We were tasked to make a siphon that self starts and I had seen this one in a PBS documentary. All I did was buy 20ft of clear thin wall 1 1/2" tubing and 12ft stick of 2" PVC. PVC cut to 2', 2.5', 3', and 4', ran the tubing through each PVC in that order and I was done. Took 45 min tops. Soup to nuts.

Your a great KZfaqr

Problem with your mark one was the diameter and volume of air inside of the pipe. The problem with your mark two was shape. Your mark two could be done much easier, (or upgraded) by ading a bendable wire/rod to the hose. Obviously, if you only attach hose to the bended rod, there will be no cuts on the hose, and the hose will hold its shape even when already falling into the watter, just thrown by your hand. And finaly - the best sollution would be having a hose with one-way valve on its end, and fill the hose by jerking it up and down in the jug.

Here before 1 million subs

Why not make it from one long (airtight) clear plastic hose and then use some external PVC piping to keep the straight parts straight?

Bro they make blue pipe glue for PVC lol. Never the less Glad you accomplished this feat!

Very good job :] :-D

That's so cool 🙂

That laminar flow is sick

Cool stuff ngl

I don't know why I watched but I did and good job for keeping my attention.

can’t believe i was your 31st subscriber. You are going to have 1mill subs by the end of the year no joke

I wish you will have more support

I found you off TikTok I’ve watched a couple videos and 2 of them you went up 2k each time subs

4:05 well it was almost working ,well I almost won the lottery

this video is underrated!!!!!!

Awesome video

How much was the water bills?