I made the covert aerial muffler emit light and made a combined weapon!

Рет қаралды 27,567

3 ай бұрын

I made good use of the clear parts from SD Covert Aerial and painted it so that only the shell unit-like pattern would emit light. It introduces the painting procedure and the paints used.
There's also a bonus combined weapon at the end!
01:20 Painting the muffler
04:54 Light emission from the front of the waist
06:12 Bonus
06:45 Bonus 2
08:10 Completed photo
===============
SDW HEROES Secret Gundam Aerial
　amzn.to/3JsxoMd
Aspara Model ASP Hand Tanuki Ver.De (Deformed Type)/set α
　store.shopping.yahoo.co.jp/as...
Here is the black light I used
　amzn.to/3QC9zTL
fluorescent printing paper
　www.yodobashi.com/product/100...
printed transparent stickers
　amzn.to/4cMT2I9
The nippers I use are “Blade One”
　amzn.to/3ATYk2Z
Airbrush used “GSI Creos Procon BOY PS270 WA Platinum 0.2mm”
　 amzn.to/43Md15S
The compressor I use is “Nitro Comp V2”
　amzn.to/3p7LdJ1
Camera and lens used for shooting
　amzn.to/417ApYm
　amzn.to/3VyYvtV
My favorite plastic model tools are also introduced here.
room.rakuten.co.jp/itamitech/...
===============
Music used
"Araburu Sword" written by alaki paca
“Tatatta on the tatami” written by Fukagawa
"Kabuki Dancing" written by So Yamaguchi

Пікірлер: 33

@user-bo7kr5jy8d Ай бұрын

なんやこれカッコ良すぎる！

@user-se8qd9dy8t 3 ай бұрын

宝石みたいに綺麗

@user-pg1xm1fx5l 3 ай бұрын

天才だ

@Bluesharky38 Ай бұрын

Amazing! :D

@user-xh9cv6es6h 3 ай бұрын

かっこいい！！

@ahr744 3 ай бұрын

素晴らしい完成度だ、どこかで見たの盾か有れば、どこかで見たの忍者のようにショートバレルの種子島鉄砲か有ってももおかしくないですね！

@mohikantanuki7540 3 ай бұрын

発光ギミックの発想も出来もとても素晴らしいですし、素体のSD自体もすごく綺麗に作られてますね。素体のほうの塗装のコツとか塗料の種類とかのそっちのほうも気になります。

@user-lj5he6fx6j 3 ай бұрын

Twitterで見てましたが、動画版待っていました😂マフラーとか、こんな風にしてたんですね😳うちの環境でもできる感じなので、参考にします(未だに隠エア買えてないけど💀)😁

@_Cenote_ 3 ай бұрын

またまた良い作品を見せていただきました。やっぱりイタミテックさんは「魅せ方」を分かってらっしゃいますね～。眼福です。というか、これ塗分けがエグくないですか？マスキングゾル使ったとしても、、、ちょっと想像するだけでクラクラします（汗やっぱり忍者ものは「ニン」な指のポーズしたくなりますよね。私もハインドリーシュトルムを忍者風にして、スリーマンセルの小隊作って遊んでました。マフラーは30MMのマルチクロス、ハンドパーツは余っていた極め手を使いましが、やっぱりたぬきハンドはカッコいいですね。ニンニン。

@itamitech 3 ай бұрын

セノーテさん！ありがとうございます。ほんと塗り分け大変でしたw ハインドリーの足のあたりが忍者ぽいし、30MMのマルチクロスのアイデアは良いセンスですね！

@sultonparekediri7421 10 күн бұрын

Bro do you having recommend putty for sculpting hair nendoroid? Please tell me I'm your fans from Indonesia

@uwakinashobi2108 3 ай бұрын

AMAZING

@NeoSlashott 3 ай бұрын

Ninpo: Escutcheon! 😎

@FLAMELOAD 3 ай бұрын

최근에 만들었었는데 . 차이가 너무 나 ㅋㅋ 너무 멋있네요!!

@mbahegantengx993 3 ай бұрын

Man, when i see cool sdw kits, i press subscribe...

@WheelchairFencing 3 ай бұрын

Same here. What an incredible work.

@DRUMMAN0508 3 ай бұрын

蛍光塗料で光らせるのにおいてイタミテックさんの右に出るものはいませんね!! かっこよすぎます🥹 ちなみに蛍光レッドって光り方オレンジ寄りですよねぇちゃんと赤く発光する蛍光レッド出ないかな....

@itamitech 3 ай бұрын

ありがとうございます！＞赤く発光する本当にそうですよね。かなり蛍光を調べていますが、なかなか見つかりません。。。

@WheelchairFencing 3 ай бұрын

I am interested to the 30mm parts. Can I know which kit(s) provide these parts? Thank you!

@zeinhoify 3 ай бұрын

中間是30MM eEXM-S01U 弗雷斯蒂耶里的背包兩側是不知名的腳骨架跟一些改造插口頻道主的推特文章有寫文章狀態網址應該是1767924096741089332 日期是3月13日 YT規則留言沒辦法貼連結

@itamitech 3 ай бұрын

Forestieri amzn.to/3Q3vc1e I made this backpack based on the leftover parts.

@WheelchairFencing 3 ай бұрын

@@itamitech Thanks for sharing. but how about the lateral side parts? I have checked long time, but still cannot find where they come from.

@itamitech 3 ай бұрын

@@WheelchairFencing I tried to look into it myself, but the identity was unknown. . . However, I think parts with holes on the left and right can be substituted.