New video idea: Walk to China to get keycaps.

the only video i have watched whic was sponsered but didnt fell like a straight up advertizement big up sqashy

but that's not really the purpose of gasket mount? Its original purpose was to isolate noise and vibration from the plate. It was a bi product for the board to have some flex/bounce. So I don't really see why people say gasket mounts that don't have a bounce are bad/defeats the point. It doesn't. Love the vid though and love the channel.

Love the editing. You're getting better, and funnier. Great work.

I wisch you a good recovery with your legg and the video is really good good job man

good to see a company like asus make their products compatible with after market products

Nice vid, love the editing, the pause after “switches” made me crack up

Really liked that build mate

You did amazing with this video

Asus, that keyboard was the bomb. I would buy that thing right now.

I have one and it sounds perfectly fine. No need to mod whatsoever but to each his own.

That switch remove was so satisfying

squashy boy back it again with another banger

Squashy Boy... sponsors can be really proud. The best youtuber for sponsors EVER... none can make advertising that entertaining.

clean editing

bro enjoys pain with that switch transition, the MASKING BROTHER

great vid hope you got some of that sweet sponsor money💸

Greetings from Western Australia !!! Awesome content mate, keep up the great work ! Going on holidays to Singapore and Kuala Lumpur in November and can't wait to check out the Keyboard shops there

It has backlit keycaps out of the box. It is not clear whether that was backlit after the "upgrade". Backlit keys are one of the most important things for me. Gr8 video though.

good editing!!

woah ok for a second I though you had the same glasses as me (and now something keyboard related) : Any experience with Wugue studio pre lubed switches? Are they worth it?

Squashy boy video just dropped, it's a good morning

you should build a full wish keyboard, no exceptions. It has to be completely from wish, the keycaps, stabilizers, switches, PCB, case, foam, plate, and lube. DO NOT FORGET, it has to be thocky by the way. (and there HAS to be a Artisan Keycap.)

SQUASHI IS BACKKK

SQUASHYS BACKKKK!!!!

you have a cool chill out place outside the house with fridge .

Can't spell Squashy Boy without the squa SHY BOY

y-you know what else you can’t spell without sus… SqUaShy boy.

“I am challenging you to upgrade our latest rog gaming keyboard” *how did you find my house*

I love me some Oil Kings but won't that defeat the purpose of an RGB keyboard since the housing does not diffuse the light at all? I rather use them on non-rgb pcbs imo.

You don't make enough videos!

imho, gasket is nice but sometimes it just feels squeeze, maybe i'm gonna fill the gap so it will damp the sound more

Hi nice vids btw, just a question how do you create a custom animation for the azoth oled? Mine doesnt show up

bluds kitchen in the front yard

Are you telling me I can have big anime bonkers on my keyboard?!?

I will wait till the price drops or a barebones comes out, it’s 300€ in Europe

I LOVE SQUASHY BOY

I think it should be squashy boiee

Squashy next goal is gonna find everyone of he's fan house

You should test CoolerMaster CK720

Where did you get your stabilizers from if you dont mind me asking?

Oooooof you need to install armoury crate to modify the screen...

Bro I do a custom keyboard and I have the same keycaps bro that’s awesome 😎

Ayo, make full video of Bad Apple on keyboard

Which desk mat are you using ?

what stabilizer did you use???

I thought the purpose of gasket mount was to isolate the pcb/plate assembly from the case to lower vibration and noise. Flex and bounce can be desirable secondary effects, but they aren't always the primary intention. That said, though, stacking foam underneath and completely removing any softness in the typing feel means you're probably better off just doing a tray burger mount or something similar. That would reduce the cost by not having to design and then manufacture a gasket mount, only to then mount it on foam, essentially making a Frankenstein stack/gasket mount. Asus really screwed up the mounting just for the marketing buzzword of gaskets, and rushed it through production so they didn't have to spend time on design and testing for good acoustics. You're absolutely right about the gasket- it is quite an awful implementation, but it just wasn't the best way of saying it.

didnt expect asus to take the steelseries mini and make it into something better

any recommendations? I'm thinking of getting either the azoth or the wooting 60 (and be prepared to wait). happy for other suggestions I'll most likely upgrade my board over time it will mostly be used for gaming, music production and university work / essay writing. ty

I know it sounds kinda stupid this complaint i'm going to do, but i think the AmouryCrate could be a bit more intuite to use, especially when it comes about the upload of images on the OLED. They don't give lots of instructions about the fitting dimensions, so there are lots of gifs and images that the screen will clip and you'll only see a small part of it.

swaggiest keyboard ever ong

are the LED lights still visible after using Oil King Switch?

"How did you find my house ?" 🤣🤣

OKAY IM IN LOVE WITH BAD APPLE

7:30 jif

nice!

Bruh squashys friend just ran a- the asus consultant just ran away

Squashy is just funny😂

cant believe squashy boy one of the 2005 boys

That guy was never from ASUS was he...

dadddyyy

remember on the stream where u leak the intro for the vid and i stated spamming apex and osu

he's back

Q1 Pro, or this? Can't decide

Hello I tried the snap remove multiple times and it didn't work the soldered switches always stays inside, can you make a tutorial video on how to do it? Thanks!

U GOT BRACES

Where do you get the stabilizers?

kingdom hearts sound at 0:00

cant spell asus without sus

I see you used cherry style keycaps. Did you notice any issues with that on this keyboard because of the north facing led lights.

guy :i want you to upgrade our new gaming keyboard: him: how did u find my house?

Guys i just bought the james donkey a3 what do you guys think about it

HOLY SHIT THAT WAS SMOOTH EDITING 2:20

yay

i agree.

good sia

Would love to order an Asus Azoth, (already upgraded). Where can I do that?

Damnnn azoth

I SuSpected aSUS would yoink your keyboard

7:31, "JIF"

If I was going to build a costum keyboard, what switches would you recommend me?

Playing Bad Apple on a sus keyboard is a very good idea.

what are those poron gasket replacements?

review monka 3075 pls

ASUU.... at the end lol

Please bring back the old ending song😣

Bruh why did they use a ribbon cable? At least it’s a thick one that is less likely to break.

is it an asus keyborad anymore if you replaced about everything

What stabilizers he use??

video is a slayyyyy

Link for the desk mat?

Very cool 👍

Asus: uPGradE keYboARD oR We nO spONsOr (proceeds to put it away from squashy to flex his working pair of legs) Squashy: 😐🩼

the fact he called it a jif is

Now replace gaskets with springs. Ok I just watched Keybored before that one

I really like 4:27 because of the nice fe- i mean siwtches

I SUScribed.

Hey, try upgrade dream machines keyboard

Excited

How is it possible to make a perfect keyboard better?